3PDT guitar FOOT SWITCH with led

New guitar with a light switch start formal global sales, before the guitar switch is not to bring more light, in order to be closer to the customer individuality demand, FILN designed a guitar with line with lamp switch, mounted on a sound effect on very bright spot, when people are very happy to play the music, whenever I see a guitar with lamp switch can trample down, is very convenient.

This guitar switch with light has a hole of 16MM, with 5 monochromatic colors of red, yellow, green, blue and white, as well as two colors of red, green, red and blue. It is very convenient to use. The light is led out by the wire, and the welding wire is also very convenient

Accessory name material
button Aluminum alloy
Sleeve Zinc alloy
Stud Copper alloy
Swing rod Zinc alloy
Iron shell stainless steel
Midfoot footboard Copper alloy
lampshade PC
shell PBT
Base PBT
support POM
circuit board PCB
Lamp beads led

Electrical performance:

Project Test Conditions Skills requirement
6.1 Switch rating 250V2A/125V5A
6.2 Lamp rating White light 3V20mA/red light 2V20mA/green light/3V20mA blue light 3V20mA/yellow light 2V20mA
6.3 Insulation resistance A DC500V was applied between the copper legs and between the copper legs and the outer casing, measured after one minute. ≥100MΩ
6.4 Withstand voltage Apply AC2000V between the copper foot and the outer casing, 0.5mA, 10 seconds; No breakdown or flashover.
6.5 Electrical durability Under rated load, it is operated 30 times per minute for a total of 10,000 operations. 1. Appearance and feel are acceptable;

2. Contact resistance ≤ 2Ω;

3. The pressure test is qualified.

7 Mechanical behavior:
7.1 Operating force The switch is placed perpendicular to the direction of operation, applying a force on one side of the button to measure the maximum force required to turn the switch on. 10-20N according to customer requirements.
7.2 Copper foot strength A 60 N static load was applied to the top of the copper foot for an inward push for 60 seconds. The terminal has no damage, falls off, and the switch function works normally.
7.3 Solderability The copper feet were immersed in a molten tin bath at a temperature of 235 ± 5 ° C for a time of 3 ± 0.5 seconds. More than 90% of the surface of the immersed portion is covered with tin.
7.4
Resistance to soldering heat The welded portion of the copper foot was immersed in a molten tin furnace at a temperature of 260 ± 5 ° C for 3 ± 1 second.
  1. The body has no obvious deformation;
  2. Mechanical performance, electrical performance test qualified.
Manual soldering iron welding, welding temperature 350 ± 5 ° C, welding time 3 ± 1 second. Do not apply pressure to the copper feet during welding.
8 Mechanical behavior:
8.1 High temperature resistance It was allowed to stand in an environment of 85 ± 2 ° C for 72 hours, and then placed in a natural environment for 1 hour and then tested. 1. Appearance and feel are acceptable;

2. Contact resistance ≤ 2Ω;

3. The pressure test is qualified;

Qualified mechanical performance.

8.2 Heat and humidity resistance It was placed at 40 ± 2 ° C, humidity 91% – 95% RH for 96 hours, and then placed in a natural environment for 1 hour and tested.
8.3 Low temperature resistance It was allowed to stand in an environment of -25 ± 2 ° C for 12 hours, and then placed in a natural environment for 1 hour and then tested.
8.4 Temperature alternation The temperature was alternated according to the temperature and time shown in the figure, and the test was carried out 5 times in a row and then placed in the natural environment for 1 hour.

12MM Metal Miniature Push Button Switch With Wire

Miniature Push Button Switch Product Introduction

 

1. What is a miniature push button switch?

It is an electronic component that is used to control the flow of power. How does the market view the button switch? Let’s take a look at the button switch.

The mass production of button switches in our country should be in the period of the rapid development of the home appliance industry, especially the color TV industry, which has a history of more than 30 years.

At present, it is still one of the main products in the plug-in components and is suitable for all kinds of small household appliances, color TVs, desktop computers, audio systems, DVDs, office equipment, communication equipment, electronic musical instruments, medical electronic equipment, CNC machine tools, automatic control equipment And other applications.

The market continues to be optimistic in 2006. Among them, the demand for small round button switches has increased. The price increase of raw materials such as copper, steel, gold, and energy consumption will have a certain impact on the original product unit price, and the sales volume will increase by 10% to 15%. The total demand is about 500 million to 700 million, and some estimates are relatively large and may exceed 1 billion. The unit price of the button switch varies greatly due to different shapes and uses. The cheap one can be purchased for less than 1 RMB, the mid-range one ranges from 3 RMB, 4 RMB to dozens of yuan, and the high-end one needs several hundred yuan. One is even higher.

The application field and function of the wave switch are relatively close to that of the button switch. Button shapes are flat, V-shaped, arc-shaped (called boat-shaped) and so on. There are lighted and unlighted specifications. Button covers are available in red, green, blue, white, yellow, black, orange and other colors. There are unilateral self-reset and bilateral self-reset in the bit form. The number of digits includes single pole, double pole, three positionings, etc. The life span ranges from 10,000 to 50,000 times. Mainly used for power on and off.

Our FILN company is specialized in the production of miniature push button switches. We have more than 20 years of production experience and have customer resources all over the world in overseas markets.

2. There are two types of miniature push button switches, one without a lock and the other with a lock. Next, I will introduce the difference between lock and lock.

3. The self-locking button switch means that when the switch button is pressed for the first time, the switch is turned on and held, that is, self-locking. When the switch button is pressed for the second time, the switch is turned off, and the switch button pops up at the same time. The self-locking switch means that when the switch is pressed, the built-in lock function will not automatically bounce. When you press it, the button will not bounce when you let go. It is in a locked state and needs to be pressed again to unlock and fully bounce. This is a Self-locking switch.

4. The lock-free switch is when the switch button is pressed for the first time, the button is turned on, but the button will bounce back as the hand returns, that is, it is unlocked. When the switch button is pressed for the second time, the switch is turned off and the switch is turned off. The button pops up. The non-lock switch means that the switch will automatically pop up when it has no lock function when it is pressed. This is the non-lock switch.

5. What is the shelf life of this miniature push button switch?

The shelf life of this miniature push button switch metal button is 5 years. If you want better quality, FILN can customize it for you, and the service life can be 700,000 times. If you encounter any problems during the warranty period, you can write an email to contact FILN technical after-sales group inquiry@cnylin.com.cn, we will contact you immediately within 12 hours to solve any of your product quality problems and solutions.

6. What is the current of the miniature push button switch?

The current of this 12mm metal button is relatively small and belongs to a low current. It is used below 2A ampere. If it is higher than 3A, its service life will be very short, and it may burn out after about 1000 times.

7. How to buy this miniature push button switch?

You can send an inquiry to our company through Alibaba or leave a message to us online from Alibaba. We also have a dedicated sales representative to give you a professional reply.

If you are in a factory and use this button switch a lot, you can write an email to contact the sales staff of FILN company sales2@filn.com.cn, the FILN button switch sales team has 10 years of sales experience and service in foreign trade, We will get back to you within 24 hours.

7. Can FILN company customizes the buttons we need that are not available in the market?

FILN company has more than 10 professional button R&D engineers, who specialize in customizing various button switches with different styles and functions. As long as you need it, FILN company can provide various customized services. Moreover, it only takes 30 days for a new button from your idea to research and development design, the development of the abrasive tool to the completion of the finished product sample. FILN company can also provide OEM services, can be marked with your trademark and so on. As long as you pay for the cost of abrasive tools and research and development for the button switch, FILn will only provide you with exclusive use and sales, which can greatly enhance your competitiveness and profit.

What are the advantages of FILN in producing miniature push button switch? FILN is a company integrating industry and trade with more than 20 years of production experience and more than 10 years of foreign trade experience. We focus on the production of waterproof indicator lights, waterproof buttons, waterproof rocker switches and other waterproof series. The miniature push button switch we produce is available in sizes from small to large, with 12mm mounting holes, 16mm mounting holes, 19mm mounting holes, 22mm mounting holes, 25mm mounting holes, 28mm mounting holes, 30mm mounting holes, and 40mm mounting holes. Meet the different needs of different customers in different scenarios. Moreover, the miniature push button switch can satisfy all customers’ requirements for voltage, lamp color, waterproof grade, and service life. Provide customers with a pleasant purchase and assured use process, and can provide customers with high-quality after-sales problems within five years. FILN sincerely allows customers to become our lifetime users.

If you are interested in this double throw push button switch, please contact us directly.

High Power Touch Switch With Wifi

In order to welcome the arrival of 5G era and join the smart home, FILN has developed a high-power touch switch with WAIFI.

The touch switch has several special features

1. Any pattern and LOGO can be customized for the glass surface.

2. This touch switch can be used directly on 1000 watt mechanical products

3. This touch switch is not afraid of water, which is different from other products

4. This touch switch is waterproof IP68

5. This touch switch has WAIFI function and can be connected to WAIFA control switch function

name material
panel Glass panel
shell nylon
Base ABS
circuit board PCB
Wire Teflon line
Project Test Conditions Skills requirement
6.1 Switch rating 110V-250V/5A
6.2 Insulation resistance DC500V was applied between the wire and the casing and measured after one minute. ≥100MΩ
6.3 Withstand voltage Apply AC2000V between the copper wire and the outer casing, 0.5mA, 10 seconds; No breakdown or flashover.
6.4 Electrical durability Under rated load, it is operated 30 times per minute for a total of 10,000 operations. 1. Appearance and feel are acceptable;

2. Contact resistance ≤ 2Ω;

3. The pressure test is qualified.