Table of Contents
19MM Waterproof IP67 12V Red Marine Push Button Switch
- Mode: FLM19-10FEWM
- Voltage: 2V, 3V, 6V, 12V, 24V, 110V, 120V, 220V, 380V
- Keyword: Marine Push Button Switch
- Current: 10A (DC) 10A (AC)
- Color: Red, Blue, Orange, Green, White
- Material: Copper, Stainless steel, Zinc alloy
- Certification: CE, CCC, ROSH, IP67, UL
- Waterproof grade: IP67
- Wire specification: AGW22
- Email:[email protected]
- Download PDF: 19MM Waterproof IP67 12V Red marine Push Button Switch
The mounting hole size of the product is 19mm, and the installation style is screw thread.
You just need to open the hole of the size 19.2mm on the panel, then put the waterproof IP67 12V red marine push button switch in the installation hole.
Put on the 19mm silicone waterproof ring and then screw the 19mm copper cap. It can be fixed and also be waterproof.
Marine push button switch parameters
|Production Series||FLM19-10FEWM||Light Guide Button||PC plastic|
|Button Shape||Round||Actuator||304 Stainless steel|
|Button LED Color||Red blue orange green white||Housing Sleeve||H59 nickel plated brass/304Stainless steel|
|Mechanical Life||The 500 thousand time||Button Pin||22AWG PVC wire(0.3MM2)|
|Electrical Life||The 100 thousand time||Rubber Ring||SIL silica gel|
|Protection Level||IP67 IK09||Nut||H59 nickel plated brass|
|Rated voltage||36V（DC） 250（AC）||Housing||PA66+GF20% nylon|
|Rated Current||5A（DC）5A（AC）||Light Source||LED|
|Rated Power||36W（DC）125W（AC）||Resistor||Metal film|
The description of the waterproof IP67 marine push button switch.
- The product has a variety of voltages, such as 2V, 12V, 24V, 110V, 120V, 220V, 380V, etc., we can customize different voltages according to customer’s demands.
- The metal shell material of the product is divided into zinc alloy, stainless steel, brass.
- Stainless steel product has the corrosion-resistant function, using 316 material, which can be used in a relatively harsh environment, such as the seaside, kitchen equipment, outdoor, etc.
- The metal appearance of the brass product is beautiful after plating treatment, and the cost is relatively low, which is used indoors, such as test equipment and automation equipment.
- The zinc alloy product has the advantage that the metal appearance can be plated in a variety of different colors, such as red, green, black etc. After plating, the whole push button has color, which is more personalized.
- The product has a variety of colors, such as red, green, yellow, blue, white, etc., we can also produce two-color or three-color push button switch.
- The maximum current of the product can be 10A 250V, and the wire is connected with 1.5 square meters. The mechanical life of the push button is 100,000 times.
- Switches can be divided into reset marine push button switch and marine push button switch with lock according to the function.
- The bottom design of the product is epoxy resin glue filling design, and the bottom is all waterproof, which can reach the waterproof rating IP68, which is particularly suitable for places with water or humid environment.
- The 12V marine push button switch wiring is designed to directly lead out, and the wiring is very convenient to connect various terminals according to your needs.
How does the 19mm 12V marine push button switch work?
The product has two types of reset and with lock, and the operate mode is different.
- The operate mode of the product with lock is that install the push button switch on the mechanical equipment, then connect the wire and the power is on, press the button, the machine starts. Press the button again, the machine power is shut down.
- The operate mode of the reset product is that install the switch on the mechanical equipment, then connect the wire and the power is on, press the button, the machine starts. When release the push button, the push button switch is automatically reset and the machine power is off and stops working.
How to connect the wire with the 19mm 12V marine push button switch?
Install the product to the control panel and connect the 12V voltage.
Press the 12V push button switch, the device starts, and the light on the push button is on.
The device will turn off when pressing the switch again.
Connect the positive pole wire of the device to the switch load pin , the other load pin is connected to the LED wire of the push button switch and the positive pole of the device.
Connect the negative pole of the device to the negative pole of the push button’s LED light pin. Please refer to the picture description below.
Where to buy the marine Push Button Switch?
1. If you need to custom the marine push button switch CH or button connection, you can email our push button technical engineer, who will give you a satisfactory solution, and his email address is [email protected].
2. Your purchase volume is relatively large, you can email to our international trade sales staff who have 10 years of overseas sales experience and will give you excellent price and service, their email address is [email protected].
4. Filn will provide the samples free of charge for your test.
The product of Filn had passed the certifications of UL, CE, ROSH, ISO90001. It also has a professional push button test laboratory, which can ensure the push button’s quality. The product’s quality guarantee period is 5 years, and Filn will replace the product for free if there is any quality issues during the warranty period.
Filn has 11 years of experience in push button production, also has a professional R&D technology team, who can customize various styles of push button switches according to your requirement.
If you have any questions about the marine push button switch, please contact us immediately. We will give you a satisfactory reply within 24 hours. Our email address is [email protected].