Search

25MM 10A 24V Waterproof Metal Push Button Switch

  • Mode: FLM25-FW-1
  • Voltage: 2V, 3V, 6V, 12V, 24V, 110V, 120V, 220V, 380V
  • Keyword: Metal Push Button Switch
  • Current: 10A
  • Color: Red, Blue, Green, Yellow, White,Orange
  • Material: Copper, Stainless Steel, Zinc alloy
  • Certification: CE, CCC, ROSH, IP67, UL
  • Waterproof grade: IP67
  • Wire specification: AGW18
  • Email: [email protected]
  • Download PDF: 25MM 10A 24V Illuminated Metal Push Button Switch

25mm-push-button-switch-with-wire.jpg

Metal push button switch parameters

Production Series FLM25-FW-1 Light Guide Button PC plastic
Button Shape round Actuator 304 Stainless steel
Button LED Color Red blue green yellow white Housing Sleeve H59 nickel plated brass/304Stainless steel
Mechanical Life The 500 thousand time Button Pin H62 copper alloy
Electrical Life The 100 thousand time Rubber Ring SIL silica gel
Protection Level IP67 IK08 Nut H59 nickel plated brass
Rated Voltage 220V(AC) Housing PA66+GF20% nylon
Rated Current 3A Light Source LED
Rated Power 660W Resistor Metal film
Operating Temperature -25℃~+85℃ Contact AgCdO12

The description of the 25MM 10A 24V metal push button switch

The mounting aperture of the 25MM 10A 24V illuminated metal push button switch is 25MM.

The panel opening size is between 25.2MM and 25.5MM, then put the product into the mounting hole, cover the waterproof ring, and tighten it with 25MM copper nut.

The material of the product’s metal part is divided into three materials.

  • Stainless steel product adopt 304 or 316L material, which contains nickel material, so it has corrosion resistance function and it is suitable for outdoor and seaside use.
  • Brass product has the advantage of beautiful appearance after electroplating treatment, usually used in test equipment and automation equipment.
  • Zinc alloy product has the advantage that it can be electroplate a variety of different colors, such as red, green, black, and so on. The appearance of the whole button is with color after electroplating.
push button switch material

 

  • The plastic material of the product is PC and PA66, which can withstand temperature of 160 degrees and it is usually used in an environment between minus 40 degrees to 80 degrees.

 

  • The product has the reset function, it is a normally open function, its contact point is a silver point which size is 3.5mm. Its current can reach 10A. It is a direct lead design and the bottom is epoxy resin filling glue, which can achieve the function of fully waterproof. The wire adopts AWG18 high temperature Teflon wire.
push Button switch function
25MM 10A 24V Waterproof Metal Push Button Switch
  • The product has a waterproof ring designed inside. Its waterproof rating is IP68, which can be used outdoors or directly in water.
  • The mechanical life of the product is 500,000 times and the service life is 100,000 times.
  • The product can achieve a variety of colors, such as red, green, yellow, blue, white, orange, etc.
  • The product has a variety of voltage, such as 2V, 12V, 24V, 110V, 120V, 220V, 380V and so on.
  • The wire end of the product can be connected to various terminals according to customer’s requirements, such as 2.54 terminal and so on.

How does the metal push button switch work?

  1. The product has the function of self-locking and self-replicating. Self-locking product means when you press a button, it does not return automatically. You need to press the button again to return the button to its original position.
  2. Automatic product means press the button down, when the handle is released, the button will automatically return to the original position.

How to wire illuminated metal push button switch?

Install the product on the control panel, press the metal button switch, the device will start and the light on the button will turn on. Press the switch again, the device will turn off directly.

Connect the device’s positive wire with the load pin of the switch, and connect the other load pin with the LED light wire of the switch and the device’s positive pole.

Connect the negative pole of the device and the LED lamp pin’s negative pole of the button can achieve this function, please refer to below picture.

push button switch wiring

What is the smallest size of the metal push button switch?

Filn is a factory specializing in the production of buttons, there is no MOQ, you can purchase from 1 piece. We can provide samples free of charge for your test.

How to purchase the metal push button switch?

Indicator light factory

If you are a factory in need of a large volume of button switches, or you need to customize the product, you can email us at [email protected].

Indicator store

If you need a small quantity, you can place the order directly at www.cnfiln.com, we will arrange the delivery on the same day.

How to ensure the quality of the metal push button switch?

Indicator light certification

The waterproof push button switch of Filn had passed the certifications of UL, CE, ROSH, ISO90001. Besides, Filn has a professional push button switch testing laboratory to ensure the quality of the button.

Moreover, Filn has 11 years of experience in button production and a professional R&D team.

In addition to the 25MM metal push button switch, we also produce other different styles of push button switches, indicator lights, rocker switches and so on.

If you have any questions about metal push button switch, please contact us immediately and we will give you a satisfactory reply within 24 hours.

Quickly place an order online
Fill out my online form.