Product Summary
These status led lights (Model: FL1P-12.5QJ-1) are reliable 12.5MM round flat-head plastic indicator lights engineered for industrial control panels, electrical machinery, and distribution systems. Manufactured by FILN, this snap-in component combines a lightweight Nylon PA66 housing with dependable 2pin terminal connections, offering high cost-effectiveness and excellent temperature resistance. It supports customizable single voltages ranging from 3V up to 480V AC/DC and features multiple LED color options (Red, Green, Yellow, Blue, White). Designed for secure snap-in installation using built-in mounting ears, it serves as an efficient visual status indicator across diverse applications.
| Request a Sample | Buy This Indicator |
| Request Datasheet PDF | Request 3D Model / CAD |
Open All Plastic Indicator Lights Category
Key Takeaways
- Precise Mounting Size: Engineered specifically for a 12.5MM panel cutout, allowing secure snap-in installation.
- Lightweight Plastic Construction: Built from durable Nylon PA66, making this 12.5mm panel indicator light lighter and more cost-effective than metal alternatives.
- Wide Voltage Range: Supports single customizable voltages spanning from 3V up to 480V AC/DC.
- Stable 2PIN Terminals: Equipped with 2pin plug terminals for reliable and straightforward electrical connection.
- Flat Head Profile: Features a clean round flat-head lens design that sits flush or neatly on equipment boards.
- Snap-In Mounting: Utilizes integrated mounting ears for fast push-to-fit mechanical fixation without threaded nuts.
- Diverse LED Colors: Available in Red, Green, Yellow, Blue, and White (R/G/Y/B/W) to match various operational signals.
- Certified Quality: Complies with RoHS standards and features CE, VDE, ISO9001, and CCC product compliance.
What Is a Plastic Indicator Light?
A plastic indicator light is a vital signaling device mounted onto equipment control panels, distribution boards, and industrial machinery to communicate operational statuses, power warnings, or mode alerts. Compared to old incandescent lamps, LED pilot lights draw minimal power, emit minimal heat, and deliver an extended operational lifespan of up to 60,000 hours.
The model FL1P-12.5QJ-1 features a 12.5MM mounting size with a round flat-head profile and snap-in mounting ears. Its 2pin terminal wiring enables fast electrical setup. Plastic signal indicators provide excellent electrical insulation, light weight, and high cost-efficiency, making them ideal choices for large electrical equipment, laboratory instruments, control cabinets, and household appliances.

Product Overview
The FILN plastic indicator series is engineered for precision and reliability. Each assembly includes a robust Nylon PA66 housing, a built-in current-limiting resistor, a 5mm non-polarity LED source, and 2pin plug terminals. The round flat-head lens provides clear visibility across wide angles, ensuring status visibility in both bright workshops and dim control rooms. Designed with snap-in mounting ears, the unit pushes directly into the panel opening for fast and secure assembly.
Quick Specifications
| Specification Attribute | Technical Detail |
|---|---|
| Product Name & Model | Status LED Lights / FL1P-12.5QJ-1 |
| Mounting Aperture Size | 12.5MM |
| Head Type & Shape | Round Flat Head |
| Operating Voltage | Single Voltage: 3V to 480V (Customizable) |
| Termination Type | 2PIN Plug Terminals (Plastic Indicator) |
| Mounting Style | Snap-In Mounting with Built-In Ears |
| LED Colors Available | Red, Green, Yellow, Blue, White (R/G/Y/B/W) |
| Included Accessories | 1x Plastic Indicator Light |
| Product Certifications | CE, VDE, RoHS, ISO9001, CCC |
Performance Parameters
| Performance Metric | Rated Value & Test Condition |
|---|---|
| Rated Working Current | ≤ 20 mA |
| Rated Power Consumption | Approx. 0.2 W |
| Insulation Resistance | ≥ 100 MΩ (Tested at 500V DC between terminals and housing) |
| Dielectric Strength | 1500V AC, 50/60 Hz for 1 minute without breakdown |
| Ingress Protection Rating | IP50 (Dust resistant for enclosed indoor panels) |
| Operational Working Life | 60,000 hours under rated operating conditions |
Component Materials
Every component of this plastic indicator light is chosen for structural durability and electrical safety:
| Component Part | Material Composition | Engineering Purpose |
|---|---|---|
| Enclosure & Lens | Nylon PA66 | Provides high heat resistance, lightweight body, and robust electrical insulation. |
| Light Source | 5mm Non-Polarity LED | Ensures high luminosity, low power draw, and simplified DC wiring. |
| Internal Resistor | Carbon Film Resistor | Accurately regulates current across different voltage configurations. |
| Mounting Mechanism | Integrated Snap-In Ears | Secures the indicator firmly into panel cutouts without threaded nuts. |
Environmental Performance
| Environmental Test | Test Parameters & Conditions |
|---|---|
| Operating & Storage Temperature | −15°C to +80°C |
| Relative Humidity | ≤ 85% RH at +40°C |
| High Temperature Resistance | 96 hours at 80 ± 2°C |
| Low Temperature Resistance | 96 hours at −15 ± 2°C |
LED Specification
Optical and electrical characteristics tested under standard ambient temperature (Ta = 25°C):
| LED Color | Forward Voltage (VF) | Luminous Intensity (Iv) | Dominant Wavelength |
|---|---|---|---|
| Red (R) | 1.8V – 2.2V | 1000 – 1500 mcd | 620 – 625 nm |
| Green (G) | 3.0V – 3.2V | 8000 – 10000 mcd | 520 – 525 nm |
| Yellow (Y) | 2.0V – 2.2V | 1000 – 1500 mcd | 588 – 592 nm |
| Blue (B) | 3.0V – 3.2V | 2000 – 3000 mcd | 460 – 465 nm |
| White (W) | Not specified in available product data | Not specified in available product data | Not specified in available product data |
Standard Test Conditions
Unless otherwise specified, all electrical and optical measurements are performed under standard atmospheric parameters:
- Ambient Temperature: 5°C to 35°C
- Relative Humidity: 45% to 85% RH
- Atmospheric Pressure: 86 kPa to 106 kPa (860 to 1060 mbar)
- Measurement Tolerance: Luminous intensity ±15%; Voltage ±0.1V
Applications by Industry
Due to their lightweight design, excellent insulation safety, and high cost-efficiency, these status led lights are integrated across multiple sectors:
- Large Electrical & Power Equipment: Serving as phase status and power indicators in power distribution cabinets.
- Laboratory & Testing Equipment: Providing test-cycle and system-ready status signals on scientific instruments.
- New Energy Industry: Monitoring status on solar inverter control panels and energy storage enclosures.
- Yacht & Marine Industry: Installed on dash panels for navigation and auxiliary system alerts.
- Home Appliances: Indicating operating modes on high-end commercial and residential white goods.
- Automotive Modification: Used in custom vehicle dashboards, off-road switch panels, and auxiliary accessory controls.

LED Indicator Color Meanings and Application Guide
Selecting the correct LED color ensures operators immediately recognize equipment status. The table below outlines standard industrial color conventions:
| Color | Common Industrial Meaning | Typical Equipment Status | Recommended Application |
|---|---|---|---|
| Red (R) | Danger, Stop, Fault | Emergency stop active, Overload trip | Alarm panels, fault warnings |
| Green (G) | Normal, Safe, Running | System powered on, Cycle complete | Power-on status, running indicators |
| Yellow (Y) | Caution, Warning, Standby | Temperature high, Standby mode | Pre-heating, warning alerts |
| Blue (B) | Information, Mode active | Cooling active, Function engaged | Appliance modes, marine dashboards |
| White (W) | General illumination, Power | Main power supply connected | General control board status |
How to Install a Plastic Indicator Light
This 12.5mm panel indicator light features a snap-in installation style designed for fast mounting:
- Prepare Panel Cutout: Drill or punch a precise circular hole of 12.5MM diameter in your equipment panel.
- Insert Indicator: Take the indicator unit and push it directly from the front side of the panel into the prepared circular opening.
- Secure via Snap-In Ears: Press firmly until the built-in mounting ears expand and lock securely against the rear surface of the panel.
- Connect Wiring: Proceed with proper electrical wiring to the 2pin terminals.

How to Wire a Plastic Indicator Light
Proper wiring ensures stable electrical performance and long service life. Here is a practical comparison and wiring guide for pin-type versus pre-wired indicator configurations:
| Feature | 2PIN Plug Terminal Type | Pre-Wired Lead Type |
|---|---|---|
| Connection Method | Uses female spade connectors or soldered wires onto 2pin terminals. | Comes with factory-attached wires ready for splicing or terminal blocks. |
| Installation Flexibility | Ideal when custom wire lengths or quick disconnects are required. | Saves installation time in standard repetitive panel assemblies. |
| Insulation Safety | Requires insulating sleeves or heat shrink over terminal connections. | Pre-insulated wire sections reduce exposed contact risks. |
Safety Reminder: Always disconnect power before performing any electrical wiring. Since the internal LED is non-polarity in this series, DC wiring installation is straightforward, but always verify your ordered voltage (ranging from 3V to 480V) matches the power supply to prevent damage.
Industry Knowledge Center
When integrating indicator lights into control circuits, engineers often encounter phantom illumination or faint glowing caused by leakage currents in solid-state outputs or induced voltages in long wire runs. To mitigate this on low-voltage LED indicators, technicians can incorporate a suitable bleeder resistor parallel to the input terminals. Furthermore, ensuring correct panel thickness matching and verifying operating voltage prevents premature thermal degradation.
How to Choose a Plastic Indicator Light
To ensure optimal component selection for your engineering project or procurement batch, review the following decision checklist before requesting a quotation:
- Mounting Aperture: Confirm your panel cutout matches the 12.5MM requirement.
- Voltage & Circuit Type: Verify whether your system requires 3V, 12V, 24V, 110V, 220V, up to 480V (AC or DC).
- LED Color: Select R, G, Y, B, or W based on your operational signaling protocol.
- Terminal Style: Decide between 2pin plug terminals or pre-wired configurations.
Providing these exact specifications to the FILN engineering and sales team ensures fast quotation turnaround and seamless sample delivery.
| Request a Quotation | Request Datasheet PDF |
FILN Manufacturing and Engineering Capabilities
FILN operates as a specialized manufacturer providing comprehensive R&D, custom tooling, OEM/ODM production, and rigorous quality inspection. Our engineering team assists global clients with bespoke voltage specifications, custom wire harnessing, and specialized marking requirements. Every production batch undergoes strict electrical and thermal testing to ensure consistent field reliability.

Factory Direct Supply
Yueqing Yulin Electronic Co., Ltd, brand name FILN, is located in Wenzhou, Zhejiang, and was established in 2006 as an electrical component manufacturer integrating R&D, production, and sales. FILN products are exported to over 100 countries worldwide. Operating out of a 10,000 m² facility with 20+ automated production lines and an independent testing laboratory, FILN maintains an ISO9001 quality management system.
We specialize in indicator lights, push-button switches, and control components. Visit our official website at https://www.filn.com or contact our sales engineers directly at inquiry@cnylin.com.cn for bulk orders, custom specifications, or sample requests.

Explore 12MM Metal Indicator Lights
Frequently Asked Questions
What are FILN status led lights?
They are 12.5MM round flat-head plastic indicator lights (Model FL1P-12.5QJ-1) designed for visual signaling on electrical equipment, control cabinets, and appliances, featuring 2pin plug terminals and customizable voltages. You can explore the full range on the Plastic Indicator Lights Category.
What mounting hole size do these indicator lights require?
This model is engineered for a standard 12.5MM panel cutout, secured easily via built-in snap-in mounting ears.
What input voltages are available for this product?
It supports single customizable voltages ranging from 3V up to 480V AC/DC. Be sure to specify your exact voltage requirement when ordering or requesting a sample.
Are these plastic indicator lights waterproof?
This series is rated at IP50 ingress protection, providing dust resistance suitable for enclosed indoor panels and control cabinets. They are not designed for washdown or outdoor immersion.
How do I connect wiring to the 2pin terminals?
You can connect standard female spade receptacles or solder wires directly onto the 2pin plug terminals, ensuring proper insulation with heat shrink tubing.
Does the 5mm built-in LED have polarity restrictions?
The internal 5mm LED in this series is non-polarity, which simplifies DC wiring installation, though correct voltage matching remains essential.
How can I prevent faint glowing or phantom illumination?
Phantom glowing caused by PLC leakage currents or induced AC voltages can be resolved by adding a suitable bleeder resistor in parallel with the indicator input terminals.
What product certifications does this indicator hold?
This product complies with RoHS standards and holds CE, VDE, and CCC marks, backed by FILN’s ISO9001 quality management system.
Can FILN customize colors, voltages, or wire lengths?
Yes, as a direct manufacturer, FILN supports customized voltage ratings, lens colors (R/G/Y/B/W), wire harnesses, and OEM packaging. You can contact our engineering team to discuss your requirements.
When should I choose a plastic indicator over a metal one?
Plastic indicators offer higher electrical insulation safety, lighter weight, and greater cost efficiency, making them ideal for indoor control panels and appliances. For heavy-duty industrial environments requiring high impact resistance, you can check the Metal Indicator Light Category.
What information is needed to purchase this product directly?
You can purchase immediately by visiting the Direct Product Purchase Page, or request a direct quote specifying your required voltage and color.
What is the operating temperature range for this series?
The operational and storage temperature range for this plastic indicator light series is −15°C to +80°C.
What is the head shape of the FL1P-12.5QJ-1 indicator?
This model features a round flat-head lens design that sits neatly against the panel surface, offering a clean aesthetic profile on control boards.
What accessories come included in the package?
Each unit package includes one plastic indicator light assembly featuring integrated snap-in mounting ears.
How is the snap-in installation performed?
Drill a 12.5MM hole in your panel, push the indicator straight through from the front until the mounting ears snap securely into place behind the panel, then connect your wiring.
Can this indicator withstand high-temperature environments?
Yes, the Nylon PA66 enclosure is tested to operate reliably up to +80°C and has passed 96-hour high-temperature endurance tests at 80 ± 2°C.
Where can I browse other 12.5MM plastic indicator light models?
You can explore our full selection of 12.5mm mounting options on the 12.5MM Panel Indicator Light Category Page.
Does FILN also offer 12MM metal indicator lights?
Yes, for applications requiring metal housings, you can browse our 12MM Metal LED Indicator Light Category.
How can corporate buyers request 3D CAD models or datasheets?
Procurement teams and design engineers can request technical datasheets or 3D CAD drawings directly via our official portal at https://www.filn.com or by emailing our engineering support.
What industries commonly use these 2pin plastic indicators?
They are widely used across power distribution cabinets, laboratory equipment, new energy systems, yachts, home appliances, and automotive modifications. Order online at CNFILN Product Store.
