16MM 250V 10A Momentary Doorbell 2Pin Push-Button Switch

 2pin push-button switch parameters

Production Series FLM16-10HJM Light Guide Button PC plastic
Button Shape round Actuator 304 Stainless steel
Button LED Color Red blue green yellow white Housing Sleeve H59 nickel plated brass/304Stainless steel
Mechanical Life The 500 thousand time Button Pin H62 copper alloy
Electrical Life The 100 thousand time Rubber Ring SIL silica gel
Protection Level IP67 IK09 Nut H59 nickel plated brass
Rated Voltage 36V(DC) 250(AC) Housing PA66+GF20% nylon
Rated Current 3A(DC)3A(AC) Light Source LED
Rated Power 108W(DC)750W(AC) Resistor Metal film
Operating Temperature -25℃~+85℃ Contact AgCdO12

The description of the 16mm 250V 10A momentary doorbell 2pin push-button switch.

The advantages of the product are high current, cheap price, waterproof, and here is the detailed introduction.

  • The mounting hole diameter of the product is 16mm, the installation mode is screw thread. You just need to tighten it on the push-button panel, which has a waterproof function.

  • The waterproof rating of the product is IP65, we can be also custom produce IP67 waterproof rating if you need it.

  • The rating current of the product is 10A, it can be used on mechanical equipment which power is below 1000W.

  • The head type of the product is divided into high head, round head, and flat head.
  • The material of the product is divided into nickel-plated brass, stainless steel, and aluminum alloy. The aluminum alloy material can oxidize various colors, such as red, green, yellow, blue, black, etc. which apparently is very beautiful and atmospheric.

The metal part of the product has three types of materials, as follows:

  1. The product with stainless steel adopts the 304 stainless steel, it contains nickel material, so it has a corruption resistance function, which is suitable for outdoor and seaside use.
  2. The product with copper-plated nickel has the advantage that the appearance is atmospheric and beautiful after plating treatment. It is usually used in the testing equipment and automatic equipment, the price is much more affordable than the other two types.
  3. The metal appearance of the zinc alloy product can be plated into various colors, such as red, green, blue, black, etc. After plating, the whole product appearance is with color, which is very beautiful.
push Button switch material
  • The base plastic materials of the product are PC and PA66, its temperature resistance is 160 degrees and its usage temperature is between minus 40 degrees and 80 degrees.

  • The product has a normally open reset function, its contact point is a silver point, which size is 3mm, and its current can be up to 10A.

  • The internal design of the product has waterproof circles, and its waterproof rating is IP65, it can be used indoors.

  • The mechanical life of the product is 500,000 times and its service life is 100,000 times.

How does the 2pin push-button switch work?

  1. The 2pin push-button switch has two functions of self-locking and self-reset.
  2. The 2pin push-button switch with self-locking means that press down the key, it does not return automatically, press the key again, it will return to the original position.
  3. The 2pin push-button switch with self-reset means that press down the key then release your hand, the key will return to the original position automatically.

How to wire the 2pin push-button switch?

The product’s one pin is connected to the power, then connect from the other pin. With a press, the current conduct electricity through the access board inside the push-button.

How to wire the push button switch

Where does the 2pin push-button switch use?

The product’s application is very wide, especially above the access control, and automation equipment, etc.

push button switch application

Where to buy the 2pin push-button switch?


1. If you are interested in our products or have special requirements, you can send an inquiry to our email address We will arrange for a professional salesman to contact you and give you the best price and service.


2. Your quantity is small, you can place an order directly at, we will arrange the delivery on the same day.

How to ensure the quality of the push-button electrical switch?


The 2pin push-button switch of Filn had passed the certifications of UL, CE, ROSH, ISO90001, it also has a professional push-button switch testing laboratory, which can ensure the switch’s quality.

Filn has 11 years of experience in push-button producing and a professional R&D technology team.

Except for the 2pin push-button switch, Filn also produces other different styles of push button switches, indicator lights, rocker switches, touch panels, etc.

If you have any questions about the 2pin push-button switch, please contact us immediately, we will give you a satisfactory reply within 24 hours.

Fill out my online form.