Table of Contents
22MM 8 Pins Red LED 110V Momentary Push Button Switch
- Mode: FLM22-11FJZ
- Voltage: 36V(DC) 250V(AC)
- Keyword: 110V Momentary Push Button Switch
- Current: 1A(DC) 0.5A(AC)
- Color: Red, Blue, Green, Yellow, White
- Material: Copper, Stainless Steel
- Certification: CE, CCC, RoSH, IP67
- Waterproof grade: IP67
- Email: email@example.com
- Download PDF: 22MM 8 Pins Red LED 110V Momentary Push Button Switch
110v momentary push button switch parameters
|Production Series||FLM22-10FJZ||Light Guide Button||PC plastic|
|Button Shape||round||Actuator||304 Stainless steel|
|Button LED Color||Red blue green yellow white||Housing Sleeve||H59 nickel plated brass/304Stainless steel|
|Mechanical Life||The 500 thousand time||Button Pin||H62 copper alloy|
|Electrical Life||The 100 thousand time||Rubber Ring||SIL silica gel|
|Protection Level||IP67 IK09||Nut||H59 nickel plated brass|
|Rated Voltage||36V（DC） 250V（AC）||Housing||PA66+GF20% nylon|
|Rated Current||1A（DC）0.5A（AC）||Light Source||LED|
|Rated Power||36W（DC）125W（AC）||Resistor||Metal film|
The description of the 22mm 8 pins red LED 110V momentary push button switch.
The mounting hole size of the 110V momentary push button switch is 22mm, it is a threaded mounting and fixing type.
The 22mm push button switch can achieve a variety of voltages, such as 2V,12V, 24V, 110V, 120V, 220V, 380V.
The 110V push button switch with 5 pins has the function of 1NO1NC, and the product with 8 pins has the function of 2NO2NC.
The shape of the head light is equipped with a power symbol, ring lights, and custom lights symbols, such as car dashboard symbols.
The material of the metal shell is divided into three types of zinc alloy, stainless steel, copper.
The product with stainless steel has the function of corrosion resistance, which can be used in places where the environment is relatively harsh, such as the seaside, kitchen equipment, outdoor, etc. We can also customize the 316 stainless steel, it provides better corrosion protection and longer service life.
The metal shell of the 110V momentary push button switch is chrome-plated, the appearance is beautiful, with the concave shape of the metal shell. When the LED lamp light up, the whole shell reflects the light, it is beautiful and gorgeous. The product is usually used in household wine cabinets, freezers, ice makers and other home appliances.
The advantage of the 110V momentary push button is that the metal appearance can achieve a variety of colors, such as red, green and black, etc. After plating, the whole push-button appearance is with color, which is more personalized and can meet the usage needs of different scenarios.
How to wire the 110v momentary push button switch?
There are four common wiring methods.
1. This is the most common connection, bridge connect a lamp pin and the switch’s NO pin, then connect them to the working device.
The public pin is connected to the positive pole of the power, the negative pole is connected to the device’s load, the other LED’s lamp pin is connected to the negative pole of the power.
When we press down the switch, the LED light inside the metal push-button switch is on and the device starts to work. On the contrary, release your hand, the device stops working and the light is off.
2. In this connection way, the built-in LED light is always powered up, so whether the switch is pressed or not, the light is always on.
When the switch is pressed, the device starts to work.
3. This connection way is exactly against the first way, the bridge connects the lights and NC pin with a heel jumper.
When the metal push-button switch is not pressed, the light is on and the device is always working.
When the switch is pressed, the circuit of the device starts to break off and stop work, the light is also disconnected from the power and is off.
4. In this connection way, the LED light is always powered up, but the switch is connected to the normally closed pin.
When the metal push-button switch is not pressed, the device is always working.
When the push-button switch is pressed, the circuit contact is disconnected and the device stops working.
How to buy the 110v momentary push button switch?
If you need the small batch samples for testing or for yourself using, you can purchase them from our Speedway.
You can also purchase from our own official retail store at www.cnfiln.com.
Next, you can buy it from our Amazon store. At present, we are uploading links of the custom symbols.
If you are an engineer, and need the samples for testing, you can email our international trade department directly.
We have over 10 years of overseas sales experience, we are online at 7*24 hours, and will give you optimum price and high quality service, our email address is firstname.lastname@example.org.