Search

19MM 10A Waterproof IP68 Marine Push Button Switches

Marine push button switches parameters

Production Series FLM19-10FEWZ Light Guide Button PC plastic
Button Shape Round Actuator 304 Stainless steel
Button LED Color Red blue orange green white Housing Sleeve H59 nickel plated brass/304Stainless steel
Mechanical Life The 500 thousand time Button pin 22AWG PVC wire(0.3MM2)
Electrical Life The 100 thousand time Rubber Ring SIL silica gel
Protection Level IP67 IK09 Nut H59 nickel plated brass
Rated Voltage 36V(DC) 250(AC) Housing PA66+GF20% nylon
Rated Current 5A(DC)5A(AC) Light Source LED
Rated Power 36W(DC)125W(AC) Resistor Metal film
Operating Temperature -25℃~+85℃ Contact AgCdO12

The description of the 19mm 10A waterproof IP68 marine push button switch

The waterproof rating of the product is IP68, the bottom is with glue and are waterproof. The following are the detailed description.

  • Regarding to the installation hole size of the product, the product’s size shown in the picture is 19mm. If you need fully waterproof panels, you need to open the hole size of 19.2mm, then put the waterproof ring and tighten the metal screw cap. In addition to the 19mm size, we also have a variety of sizes, such as 8mm, 10mm, 12mm, 16mm, 22mm, 25mm, 28mm, 30 mm, 40mm, etc.
  • The head shape of the product is a flat head, and can also produce high flat head push button with cord.
  • There are 3 kinds of metal materials for 19MM marine push button switches:

1. The metal material of the product is divided into brass, stainless, zinc alloy. The brass cost is relatively low.

2. Stainless steel has corrosion resistant, and this style on the picture is usually made of stainless steel. It is divided into two kinds of SS304 and SS316. This two types of material are not very different in appearance, but there is a lot of different in composition. 316 stainless steel contains Mo, so that 316 stainless steel is much better at high temperature resistance. If the construction needs to build in a high temperature environment, most design engineers will choose 316 stainless steel. This can better play the stability of the product. The 304 is a universal stainless steel, which is widely used to make equipment and components with good comprehensive performance. In order to maintain the inherent corrosion resistance of stainless steel, the steel must contain over 18% chromium and over 8% nickel. 304 stainless steel is a license number for stainless steel manufactured to American ASTM standards.

Use scenarios of button switches

3. The zinc alloy product’s appearance can be plated in a variety of colors. We are also working on 22mm plastic materials that can reduce the corresponding costs with constant quality.

Waterproof-marine-push-button-switches
  • The plastic material of the product is PC and PA66, which temperature resistance is 160 degrees. It is usually used at the temperature between minus 40 degrees and 80 degrees.
  • The product is a direct outlet push button, play black glue on the bottom in order to get a waterproof effect, which waterproof rating is IP68, this way can fully prevent water from flowing inside the button from the bottom.
  • The product can be produced a variety of colors, such as red, yellow, blue, green, white, it also has two-color of red and green, three-color of red and green and blue. Currently, 19mm product can only do a single group of 1NO function. Monochromatic product has 4 lines, two-color has 5 lines, and three-color has 6 lines.
  • The current of the product is 10A / 250 V AC, the wire is Teflon and the size is 1mm. It can be used on the product which power is below 1000W.
  • The product can achieve a variety of voltage, such as 3V, 6V, 12V, 24V, 110V, 220V, etc. The mechanical life of the marine push button switches is 100,000 times.
  • The certifications of the 10A marine push button switches is CE, ROSH etc.

What is the marine push button switches?

The marine push button switches are used on board, using the button to push the transmission mechanism. It makes the dynamic contact and static contact press on or disconnected, which can implement circuit replacement. The product need to choose the waterproof and corrosion-resistance materials.

How to connect the wire with the marine push button switches?

If you want the function that the locked light is on and the device starts, or the reset light is off and the device stops, please follow below wiring way.

If you want the function that the product is locked and the device starts, or the product is reset and the device is closed, please follow the below wiring way.

The wiring mode is as follows: The first step is that the positive pole of the power is connected to the load pin of the switch, the other load pin is connected to the light pin(+) of LED and the positive pole of the device.

The second step is that the negative pole of the power is connected to the negative pole of the device and the light pin (-) of the LED. Please refer to below picture.

The wiring mode is as follows: The first step is that the positive pole of the power is connected to the load pin of the switch and light pin (+) of LED, the other load pin is connected to the positive pole of the device.

The second step is that the negative pole of the power is connected to the negative pole of the device and the light pin (-) of the LED. Please refer to below picture.

Button switch wiring

Where to buy marine push button switches?

You can purchase our product online at www.cnfiln.com, or you can purchase them through offline email communication. The weight of each product is about 0.05kg.

We will choose the delivery way according to customer’s quantity.

The quantity of each box is 200 pieces, and one carton’s quantity is 800 pieces. This product has no MOQ, we can provide samples free of charge for your test.

If you’re interested in our products and need the samples, please contact us directly. Our email address is [email protected].

filn sales-team
Quickly place an order online
Fill out my online form.