Search

12MM Push Button Power Switch With Power Symbol

Push button power switch parameters

Production Series FLP12-BJ-1-XC003-P10M4 Light guide Button
Button Shape round Actuator ABS plastic
Button Color Red, Blue, Green, Yellow, White Housing Sleeve ABS plastic
Mechanical Life The 500 thousand time Button Pin
Electrical Life The 100 thousand time Rubber Ring SIL silica gel
Protection Level IP65 Nut H59 nickel plated brass
Rated Voltage 36V(DC) 250(AC) Housing ABS plastic
Rated Current 1A(DC)0.5A(AC) Light Source LED
Rated Power 36W(DC)125W(AC) Resistor
Operating Temperature -25℃~+85℃ Contact AgCdO12

What is a push button power switch?

The description of the push button power switch is as follows.

The mounting hole size of the push button power switch is 12mm, besides, we also produce the product with sizes of 8mm, 10mm, 16mm, 19mm, 22mm, 25mm, 28mm, 30mm, 40mm, etc. However, most of them are metal push button sizes.

The head shape of the push button power switch is a ball head, in addition, we can produce a flat head.

The key and casing sleeve of the push button power switch are made of PC plastic, which high-temperature resistant is 160 degrees.

Its usage environment temperature is usually from minus 25 degrees to 85 degrees. The base is made of PA66+GF20% flame retardant nylon.

The push button power switch can achieve five colors of red, yellow, blue, green, white.

Currently, the product only can achieve monochrome, four pins, 1NO and self-reset function.

The current of the push button power switch is 3A/250V AC. The product can achieve a variety of voltages, such as 3V, 6V, 12V, 24V, 110V, 220V, etc.

The mechanical life of the product is 50,000 times, and the waterproof rating is up to IP65, IK08.

As the right figure shows, the key of the push button power switch is printed with a power symbol, we can also produce other symbols.

The model of this product is FLP12-BJ-1-XC003-P10M4.

It means the product is a 12mm plastic push button, with ball head shape, plug-in connection, with a power symbol, with the function of 1NO, self-reset and 4 pins.

Push Button Power Switch with light

What type of push button power switch should I use?

The push button power switch is a manually controlled master ordering appliance. It is mainly used to issue operation commands, turn on or off the control circuit, and control the operation of mechanical and electrical equipment. The push-button’s working principle is simple. For the normally open contact, when the push-button is not pressed, the circuit is disconnected.

While the push-button is pressed, the normally open contact is connected, and the circuit is connected.

For the normally closed contact, when the push-button is not pressed, the contact is closed.

While the push-button is pressed, the contact is disconnected, and the circuit is also broken.

A push button can have multiple pairs of simultaneous contacts due to the control circuit operation.

Customers can choose the push-button according to their own request. If the hole size of the panel is 12mm, you can choose the push-button of which mounting hole diameter is 12mm. Just like this one in our picture.

How to wire the push button power switch?

The most conventional wiring requirements are, when the switch is locked, the light is on and the device starts.

When the switch’s reset lamp is off, the device is closed.

The wiring mode is as follows, the first step, the positive pole of the power is connected to the switch’s load pin, the other load pin is connected to the LED’s lamp pin “+” and the positive pole of the device.

In the second step, the negative pole of the power is connected to the negative pole of the device and LED’s lamp pin “-”. As the following pictures shows.

Button wiring 1

The other wiring mode is, when the switch is locked, the device starts.

When the switch is reset, the device is closed and the lamp is normal light.

The wiring mode is as follows, the first step the positive pole of the power is connected to the switch’s load pin and LED’s lamp pin “+”, the other load pin is connected to the device’s positive pole.

In the second step, the power’s negative pole is connected to the device’s negative pole and LED’s lamp pin “+”. As the following pictures shows.

12MM Push Button Power Switch With Power Symbol

How to purchase the push button power switch?

You can purchase our products online directly, for example, Alibaba, or buy this product through offline email communication.

Per weight of this product is about 0.02kg, we will choose corresponding delivery way according to customer’s quantity.

One box is packed in 100 pieces, and one carton is packed in 2000 pieces push-button switches.

Our online store

Application of Round Switch

If you need our products, or you’re interested in our products, or you need the samples, etc, please contact us directly.

Our email address is [email protected].

In addition to the push button power switch, Filn also produces different sizes and styles of push button switches, we can also customize the push button switch according to your requirement.

Technical-team
Fill out my online form.