Table of Contents
Emergency Stop 22 mm Button Switches Red Mushroom Equipment Lift Switch Button
This is our newly improved 22 mm plastic emergency stop switch. This new design head can be installed in both directions, which is more convenient and time-saving.
Through the understanding of users and the market, this newly designed button meets five requirements:
Emergency stop button market demand
1. The opening needs to be 22 mm
2. The head and switch combination requires a separate structure.
3. For large-size buttons, the printing on the buttons should be clear and durable
4. The switch combination has 1NO1NC and 2NO2NC to choose from
5. The plastic shell should be resistant to high temperature and flame retardant
6. Better conductivity
On these foundations, the development cycle should be short in order to be quickly introduced to the market.
For this reason, FILN has improved this 22mm emergency stop switch
So what does the button of this new buzzer push button switch look like, let us introduce this product in detail?
Product Features Introduction
1. This customized and newly designed emergency stop uses PA66 nylon, which has higher mechanical strength.
2. The internal contacts of this 22 mm emergency stop switch are made of thick silver-nickel alloy contacts and a 0.2 mm silver layer, which has better electrical properties.
3. This emergency base is made of high-strength insulating and flame-retardant material, which is safer and more reliable in use.
4. In this newly improved emergency stop, the threaded part has been improved, so that workers can install with bare hands when installing, and the product can be fixed on the panel. At the same time, the nut is fastened enough, and there are screws to fix the nut, to prevent the equipment from falling off due to vibration during work.
5. At the same time, this new design can also produce a built-in emergency stop switch with light, so that it is easier to identify the position of the emergency stop switch in a dark environment, which is more convenient for workers’ daily work needs
6. At the same time, the switch combination of the base can be selected according to the needs of the guests, 1NO1NC or 2NO2NC, and there are also 1NO or 1NC to choose from
Then the customer will ask this question, how do you wire the tail of this switch?
Emergency stop button installation diagram
The following is the conventional wiring diagram of this emergency stop switch so that when the switch is pressed, it is an emergency stop, and when it is turned, it is a reset.
At the same time, the customer asked a question. Some of our complete machines will be exported to Europe. What certification do you have?
We have completed this product, CE certification, and the latest RoHS 3.0 (2015/863).
The following is the question and answer of this emergency stop switch
1. What is the shelf life of this emergency stop?
The shelf life of this button is 5 years. If you want better quality, FILN can customize it for you, and the service life can be 500,000 times.
If you encounter any problems during the warranty period, you can write an email to contact FILN technical after-sales group email@example.com, we will contact you immediately within 12 hours to solve any of your product quality problems and solutions.
2. What are the rated parameters of this emergency stop switch?
Rated parameters 10A250VAC
3. What is the application scenario of this emergency stop?
This button is most used in industrial machinery and equipment, as well as elevators and buildings.
4. What is the LED lamp voltage of this emergency stop switch?
The voltage of this LED lamp can be customized according to customer needs, the conventional ones are 110V, 220v, 230v.
How to buy this emergency stop switch?
5. If you use less, you can go directly to FILN’s AliExpress website to buy, https://filn.aliexpress.com/store/414696, you can choose express delivery within 15-20 days, so the freight is cheaper.
6. If you are a factory and use this button switch a lot, you can write an email to contact FILN
The company’s sales staff, firstname.lastname@example.org, the FILN push button switch sales team has more than 10 years of sales experience and service to foreign trade, we will reply to you within 24 hours.
7. Can FILN company customize products that are not available in the market that we need?
FILN company has more than 10 professional button R&D engineers who specialize in customizing various types of button switches with different functions. As long as you need, FILN company can provide various customized services.
Moreover, it only takes 30 days for a new button from your idea to research and development design, the development of the abrasive tool to the completion of the finished product sample.
FILN company can also provide OEM services, can be marked with your trademark and so on. As long as you pay for the button switch and research and development costs, FILN will only provide you with exclusive use and sales, which can greatly enhance your competitiveness and profit.
8. Can the head of this emergency stop switch be replaced with metal?
You can customize the metal head according to your needs, so that it is more quality and the buttons are smoother, of course, the price will be higher than the plastic type.
This question is a very interesting question, you can only contact us for this question, but we promise to give you unexpected surprises, please contact us immediately email@example.com
Popular Product: Metal indicator light