12MM Momentary Single Point Plastic Illuminated Switch

Illuminated switch parameters

Production Series FLP12-BJ-1-DX000-P10ZM Light guide Button
Button Shape round Actuator ABS plastic
Button Color Red, Blue, Green, Yellow, White Housing Sleeve ABS plastic
Mechanical Life The 500 thousand time Button Pin
Electrical Life The 100 thousand time Rubber Ring SIL silica gel
Protection Level IP65 Nut H59 nickel plated brass
Rated Voltage 36V (DC)

250V (AC)

Housing ABS plastic
Rated Current 3A DC / 3A AC Light Source LED
Rated Power 36W(DC)125W(AC) Resistor
Operating Temperature -25℃~+85℃ Contact AgCdO12

The description of the illuminated switch

The mounting hole diameter of the product is 12mm, you can use it on the panel of 12mm.

The housing material of the product is PC plastic and can achieve different colors, its cost is lower compared to metal products.

The metal product also can achieve different colors.

The end of the illuminated switch is a terminal of 2.8mm, you can purchase the mother terminal of 2.8mm to connect or weld on the push-button’s pin. They are all universal sizes on the market.

The product’s parts include a waterproof ring, of which material is SIL silica gel, screw cap, of which material is H59 copper.

The base material of the product is PA66+GF20% nylon, and it is high-temperature resistant, which is suitable for customers with special requirements.

Currently, the product’s length is 29mm, only have this one length and achieve the function of resetting and 1NO.

The dynamic contact is silver contact, and the service life is longer.

The rated voltage of the product is 250V 1A, it can be used on the product, which power is under 250W.

24V Illuminated switch

The product’s head can achieve a variety of colors, such as red, green, white, yellow, blue, black without lamp, etc.

How does the normally open push button switch work?

After connecting the line and installing it, it will work when you press the head button, this type product is with lamp, and the lamp has many different colors, it is suitable for many different usage scenarios. Ball shape head is conventional for users and the feel is very good.

While the push-button is pressed, the normally open contact is connected, and the circuit is connected.

For the normally closed contact, when the push-button is not pressed, the contact is closed.

While the push button is pressed, the contact is disconnected, and the circuit is also broken.

Reminder, before turning on the power, please turn off the power to prevent electric shock.

How to wire a plastic illuminated switch?

Connect the product to the device that you need to control.

This 2-pin product is easy to install and use, it is a more regular and popular product on the market.

There is no particularly complex connection, it is very popular with the market, and has been several decades history.

Button wiring 1

The product’s appearance of each manufacturer looks the same, but Filn chooses the best material, and production is conducted in strict accordance with 6S standards.

This product is mass-produced using automated equipment, currently, the monthly production reaches 50W pieces, if you have demand, please contact us directly.

How to buy the normally open push button switch?

If you need to customize the normally open push button switch, or you have other special requirements, such as weld wire, how to use the product, need batch purchase, etc.

You can email our push button technical engineer Louis, he will give you a satisfactory solution, his email address is [email protected].


If your purchase quantity is large, you can email our international trade salesmen, they have ten years of overseas sales experience, will give you the best price and quality service, their email address is [email protected].

filn sales-team

If you need little normally open push button switch, you can place an order directly at, Filn will arrange the delivery on the same day.

Filn will provide the samples free of charge for your test.

Fill out my online form.