Product Summary
The FILN AD16 red light indicator is a 16mm plastic panel-mounted signal lamp designed for electrical distribution cabinets, industrial control panels, machinery, laboratory equipment and electrical systems. This plastic red light indicator features a circular raised head, a lightweight plastic housing, two-pin screw terminals and nut-fixed mounting. Its operating voltage can be customized from 3V to 480V according to project requirements. Red, green, yellow, blue and white LED colors are available. As a manufacturer of industrial indicator lights, FILN supports product customization, OEM requirements, samples, technical drawings and bulk purchasing inquiries for equipment manufacturers, distributors and electrical component wholesalers.
The AD16 red light indicator is particularly familiar in electrical distribution cabinets, where operators need a visible signal on a control panel to identify equipment conditions. Compared with many metal indicator designs, this plastic red light indicator offers a lighter construction and a cost-conscious solution for large-volume panel assembly. Buyers can select the required LED color, voltage and wiring arrangement before production.
Product identification: FL1P-16NA-1 is the FILN model reference for this 16mm plastic indicator configuration. AD16 is also a commonly used industry designation for this type of panel signal lamp.
Important purchasing information
The 3–480V range refers to customizable voltage configurations. Buyers should specify the exact rated voltage and AC/DC requirement when requesting a quotation. The required mounting hole, LED color and terminal arrangement should also be confirmed against the product drawing.
Key Product Features and Purchasing Advantages
- 16mm mounting size: A commonly used panel installation dimension for AD16 electrical signal indicators.
- Red light indicator option: Available in red, green, yellow, blue and white.
- Customizable voltage: Configurations from 3V to 480V can be discussed according to the application.
- Two-pin connection: Supplied with a 2PIN screw-terminal arrangement.
- Optional factory wiring: Pre-installed wires can be discussed for projects requiring ready-to-connect assemblies.
- Round raised head: A circular plastic head provides a visible signal on the front of the control panel.
- Nut-fixed mounting: The supplied plastic nut secures the indicator to the panel.
- Lightweight construction: Plastic construction can reduce component weight compared with metal alternatives.
- Cost-conscious assembly: Suitable for equipment manufacturers managing component costs in repeated panel installations.
- Factory customization: FILN can discuss voltage, LED color, wiring and OEM requirements.
- Multiple industries: Used in electrical cabinets, industrial equipment, laboratory instruments, renewable energy equipment, marine equipment and household appliances, subject to the confirmed product specifications.
For purchasing departments, the main advantage of this AD16 red light indicator is the combination of a familiar 16mm panel format, customizable electrical configuration and straightforward nut-fixed installation.
What Is an AD16 Plastic Red Light Indicator?
An AD16 plastic red light indicator is a panel-mounted electrical signal lamp that uses an LED light source to communicate operating conditions through a visible illuminated signal. The 16mm mounting format allows the indicator to be installed in a prepared opening on an electrical cabinet or equipment control panel.
How the Indicator Works
When the correct electrical supply is applied to the indicator, its internal LED illuminates. The light can provide a visual indication of a machine condition, electrical supply status, operating mode or other signal assigned by the equipment designer. The actual meaning of a red light indicator depends on the electrical control system and the manufacturer’s labeling.
Main Components
The assembly includes a circular plastic lamp head, an internal LED lighting arrangement, a connection section and a threaded mounting section. A plastic mounting nut is supplied to secure the product behind the panel. The two-pin terminal configuration provides the electrical connection point.
Plastic and Metal Indicator Categories
Industrial panel indicators are commonly available in plastic and metal housing families. Plastic indicators are frequently selected when lightweight construction, electrical insulation and economical assembly are important. Metal indicators are often considered when buyers require a different mechanical appearance, housing material or mechanical strength.
Plastic indicator families are available in several common mounting sizes, including 6mm, 8mm, 10mm, 12mm, 16mm and 22mm. LED color options commonly include red, green, yellow, blue and white. Depending on the model, wiring arrangements can include pin terminals, pre-wired leads and screw terminals.
Why AD16 Is Commonly Used in Distribution Cabinets
AD16 is a familiar designation in electrical distribution and control-panel applications. A red light indicator installed on a cabinet door can help operators recognize a designated electrical or equipment status without opening the enclosure. The round raised head also provides a clearly visible front-facing signal.

Order Samples, Drawings or Product Information
FILN supports engineering and purchasing teams that need to evaluate an AD16 red light indicator before placing a production order. Buyers can request a sample, confirm electrical parameters, obtain available product documentation or discuss a customized wiring arrangement.
| Request a Sample | Buy This Indicator |
| Request Datasheet PDF | Request 3D Model / CAD |
Explore the Complete Plastic Indicator Light Range
Compare additional plastic panel indicators in different mounting sizes, head designs, colors and electrical configurations.
AD16 Product Construction and Design Overview
The FL1P-16NA-1 is designed around a circular raised plastic head and a threaded mounting structure. Its front section is visible from the equipment panel, while the rear section provides access to the two-pin screw terminals. A supplied plastic nut secures the indicator after it is inserted through the prepared panel opening.
Circular Raised Head Design
The round raised head creates a recognizable signal point on the control panel. When illuminated, the selected LED color helps operators distinguish one signal function from another. The head shape is suitable for electrical cabinets, machinery control panels and other equipment interfaces that use round panel indicators.
Two-Pin Screw Terminal Arrangement
The 2PIN screw-terminal arrangement provides two electrical connection points. It is intended for projects that prefer a terminal-based connection instead of an individually prepared wire harness. For equipment manufacturers that prefer ready-to-connect wiring, factory-installed wires can be discussed as an alternative configuration.
Plastic Housing Advantages
Plastic housing is commonly selected for electrical indicators because it offers lightweight construction, electrical insulation characteristics and an economical material option. The manufacturer’s plastic indicator family uses engineering plastic such as Nylon PA66 in its specified configurations. The exact material declaration for an individual order should be confirmed against the FL1P-16NA-1 drawing and material specification.
Electrical Configuration
A red light indicator must be matched to the actual supply voltage of the equipment. FILN can discuss customized voltage configurations within the stated 3–480V range. The exact voltage, AC/DC requirement and LED color must be confirmed before production. Do not connect an indicator to an unverified supply voltage.
Configuration note for OEM buyers
When a control-panel design is already established, provide the mounting drawing, rated voltage, required color, terminal layout and annual purchasing quantity. This helps FILN evaluate whether the standard terminal arrangement or a customized wire-lead version is more suitable.
FL1P-16NA-1 Quick Specifications
The following specification table summarizes the supplied product information for this AD16 red light indicator. Buyers should use these parameters as the starting point for sample evaluation, technical approval and quotation requests.
| Attribute | Specification |
|---|---|
| Product Name | Plastic Red Light Indicator / AD16 Panel Indicator |
| Model Number | FL1P-16NA-1 |
| Industry Designation | AD16 Indicator Light |
| Product Type | 2-Pin Plastic Indicator Light |
| Mounting Size | 16mm |
| Voltage | 3–480V, customizable according to requirements |
| Connection Type | 2PIN screw terminals; factory-installed wires available as an option |
| Head Shape | Round plastic raised head |
| Mounting Method | Threaded nut-fixed installation |
| LED Colors | Red / Green / Yellow / Blue / White |
| Accessories | 1 × Plastic Indicator Light, 1 × Plastic Mounting Nut |
| Housing Material | Plastic construction; confirm exact material grade against the SKU drawing |
| Product Marks / Certifications Stated | CE, VDE, RoHS, CCC; confirm applicable certificates for the ordered configuration. ISO9001 refers to the company quality management system. |
| Typical Applications | Electrical cabinets, industrial equipment, laboratory equipment, renewable energy systems, marine equipment and household appliances |
Note: The 3–480V range represents a customization range, not a statement that every voltage configuration is a standard stocked item. Confirm rated voltage, AC/DC type, material grade and certification documentation before ordering.
Electrical and Performance Parameters
Electrical compatibility is one of the most important considerations when purchasing an AD16 red light indicator. The customized voltage must match the control circuit, while the terminal configuration must suit the equipment’s internal wiring arrangement.
| Parameter | Value / Requirement |
|---|---|
| Voltage Range | 3–480V, customizable |
| Voltage Selection | Confirm exact rated voltage before production |
| Supply Type | AC/DC configuration must be confirmed |
| Electrical Terminals | 2PIN screw terminals |
| Alternative Connection | Factory-installed wire leads, subject to confirmation |
| LED Color | R / G / Y / B / W |
| Ingress Protection | Confirm the rating for the exact SKU and configuration before use |
| Operating Temperature | Confirm the applicable product specification before ordering |
A red light indicator intended for a 24V DC circuit must not be replaced with a different voltage configuration without checking the electrical design. The same principle applies to 110V, 220V and other customized ratings.
Component Materials and Product Accessories
The plastic structure of an AD16 red light indicator is intended to provide a lightweight alternative to metal-housing panel indicators. Material selection affects electrical insulation, mechanical compatibility, temperature suitability and the expected service environment. Purchasing teams should verify the exact material grade from the manufacturer’s drawing or material declaration.
| Component | Description |
|---|---|
| Indicator Head | Circular raised plastic head |
| Main Housing | Plastic construction; confirm material grade for the ordered SKU |
| Lighting Source | LED indicator lighting |
| Electrical Connection | Two-pin screw terminal arrangement |
| Mounting Accessory | Plastic mounting nut |
| Package Contents | 1 × Plastic indicator, 1 × Plastic nut |
Why Manufacturers Choose Plastic Indicator Housings
- Lower component weight can be useful when assembling multiple indicators on one panel.
- Plastic provides electrical insulation characteristics appropriate to the designed application.
- Plastic housing can offer an economical option for repeated equipment production.
- Different head colors and electrical configurations support multiple panel signal functions.
- The threaded nut arrangement provides a straightforward mechanical fixing method.
Material advantages do not replace application testing. Confirm the specific material, temperature limits, mechanical requirements and relevant product documentation before approving a production batch.
Environmental Suitability and Operating Conditions
An AD16 red light indicator should be selected according to the actual temperature, humidity, dust exposure and installation conditions of the equipment. A plastic indicator is not automatically suitable for every outdoor, marine or washdown environment simply because its housing is made of plastic.
Application Environment Assessment
- Indoor distribution cabinets: Confirm the enclosure environment and the required protection level.
- Industrial machinery: Consider vibration, ambient temperature and the mechanical stability of the panel installation.
- Laboratory equipment: Confirm cleaning procedures, chemical exposure and electrical requirements.
- Renewable energy equipment: Check the temperature and voltage requirements of the control system.
- Marine equipment: Verify salt exposure, humidity and required environmental protection before selecting the product.
If the equipment will be exposed to rain, direct water spray, immersion, corrosive chemicals or severe mechanical impact, buyers should request an alternative configuration with verified environmental performance rather than assuming this AD16 red light indicator meets those conditions.
LED Color and Lighting Configuration
The AD16 red light indicator is part of a multi-color plastic indicator offering. Red, green, yellow, blue and white are available options, allowing equipment manufacturers to assign different visual signals to separate control functions.
| LED Color | Typical Industry Use | Selection Consideration |
|---|---|---|
| Red | Alarm, warning or designated active condition | Confirm the equipment’s alarm and status logic. |
| Green | Normal operation or ready status | Use according to the control system’s status definition. |
| Yellow | Warning or attention required | Avoid confusing warning signals with alarm signals. |
| Blue | Special operating mode or assigned function | Define the signal meaning in the panel documentation. |
| White | General indication or equipment-specific status | Check visibility against the panel background. |
Color meanings are industry conventions rather than universal rules. They can vary according to equipment manufacturers, control-system design, industry, national regulations and regional practices. The purchasing specification should identify the required LED color and its intended signal function.
Quality Verification and Standard Test Requirements
For industrial purchasing, a red light indicator should be evaluated through documented product specifications, incoming inspection and application testing. Buyers should request the applicable technical drawing, electrical configuration details and relevant conformity documents before approving a new supplier or product revision.
Recommended Incoming Inspection Items
- Verify the 16mm mounting dimension against the approved drawing.
- Check the circular raised head for visible cracks, scratches or deformation.
- Confirm the mounting thread and supplied plastic nut.
- Check that both screw terminals are present and mechanically intact.
- Confirm the ordered LED color and rated voltage.
- Conduct an illumination test using the correct rated supply.
- Verify package quantity and accessory completeness.
- Compare product markings and documents with the approved purchasing specification.
Certification and Documentation
The supplied product information identifies CE, VDE, RoHS and CCC marks for this offering. The applicable certificate scope and validity should be checked for the exact product configuration and destination market. ISO9001 is a company-level quality management system certification, not an individual product certification. Purchasing teams can request the corresponding documents from FILN before final approval.
Applications of AD16 Red Light Indicators by Industry
A 16mm AD16 red light indicator can be integrated into equipment where a compact, front-facing electrical signal is required. Its round raised plastic head, nut-fixed installation and customizable voltage make it a practical option for a range of industrial and commercial control panels, provided the selected configuration meets the environmental and electrical requirements.
1. Electrical Distribution Cabinets
Distribution cabinets are one of the most familiar applications for AD16 signal indicators. A red light indicator can be installed on the cabinet door to display an assigned electrical condition, such as a designated alarm or operating signal. Multiple indicator colors can be used to distinguish different circuits and equipment states.
2. Industrial Machinery and Automation Equipment
Manufacturers of industrial machinery use panel indicators to communicate operating conditions to operators and maintenance personnel. A 16mm plastic indicator can be considered for machine control panels, auxiliary electrical boxes and equipment interfaces that require a visible signal.
3. Laboratory and Experimental Equipment
Laboratory instruments and experimental equipment often contain control panels with multiple electrical functions. A red light indicator can identify an assigned operating or warning condition. Buyers should verify the product’s material compatibility, cleaning environment and electrical safety requirements for the intended instrument.
4. Renewable Energy Equipment
Solar power systems, energy storage equipment and other renewable energy products may use signal lamps on their electrical enclosures. The selected voltage must match the control circuit, and environmental requirements should be evaluated according to the installation location.
5. Marine and Yacht Electrical Systems
Marine equipment can use panel-mounted indicators to communicate electrical and equipment conditions. For yacht applications, purchasers should pay particular attention to moisture, salt exposure, vibration and required ingress protection. A standard plastic indicator should not be assumed suitable for exposed marine environments without verification.
6. Household Appliances and Electrical Products
Household appliances and commercial electrical products may incorporate small signal indicators to display power status, heating operation or another assigned function. The 16mm panel format can be considered where the equipment design provides a compatible mounting opening.

Application suitability depends on the confirmed voltage, mounting dimensions, material, environmental protection and operating conditions of the selected configuration.
LED Indicator Color Meanings and Application Guide
Choosing the correct LED color helps make a control panel easier to understand and operate. The red light indicator is frequently assigned to alarm, warning or other important equipment conditions, but the actual signal definition must follow the equipment manufacturer’s control logic.
Red LED
Red is commonly used for alarm, warning or designated abnormal operating conditions. In an electrical cabinet, a red indicator may be assigned to a fault signal, but the exact meaning should be stated in the equipment wiring diagram and operating instructions.
Green LED
Green is often used for normal operation, ready status or an enabled operating condition. It can help operators distinguish a normal state from a warning or alarm state.
Yellow LED
Yellow or amber is commonly assigned to caution, attention or an intermediate operating state. It is useful when an equipment designer wants to distinguish a warning from a more serious alarm condition.
Blue LED
Blue can be assigned to a special operating mode, manual function or another equipment-specific status. Its meaning should be clearly documented for operators and maintenance teams.
White LED
White can be used for general indication or a manufacturer-defined status. Buyers should evaluate visibility against the panel background and ensure that the selected signal is distinguishable from nearby indicators.
These color conventions can change according to industry, country, equipment manufacturer and control-system requirements. FILN can discuss the required red, green, yellow, blue or white LED configuration when preparing an order.
How to Install a 16mm AD16 Plastic Indicator Light
The FL1P-16NA-1 is installed using a threaded mounting section and a supplied plastic nut. The indicator is inserted from the front of the panel through a compatible circular opening, and the mounting nut is tightened from the rear to secure the product.
Required Tools
- Suitable panel hole-cutting tool.
- Measuring tool or caliper.
- Suitable hand tool for tightening the mounting nut, if required.
- Electrical wiring tools appropriate to the installation.
Installation Preparation
Before installation, disconnect the equipment from its electrical supply. Check the panel thickness, mounting position, available rear clearance and the required 16mm opening. Always use the approved mechanical drawing to verify the actual hole tolerance and thread dimensions.
Step-by-Step Installation
- Prepare the panel: Mark the intended installation position and confirm that the selected location has sufficient rear clearance.
- Make the mounting hole: Create the corresponding circular opening according to the approved product drawing and mounting tolerance.
- Clean the opening: Remove metal chips, dust, burrs and other debris that could interfere with installation.
- Insert the indicator: Place the round plastic head toward the front of the panel and insert the threaded section through the opening from the front.
- Position the product: Ensure that the head sits correctly against the front panel surface and is aligned with the intended viewing direction.
- Install the plastic nut: From the rear of the panel, place the supplied plastic nut onto the threaded section.
- Secure the assembly: Rotate the nut along the thread until the indicator is held firmly in position. Avoid excessive tightening that could damage the plastic components.
- Connect the terminals: Connect the two electrical wires to the appropriate screw terminals according to the confirmed wiring diagram and rated voltage.
- Inspect the installation: Check the mounting stability, terminal connections and wire clearance.
- Conduct an operating test: Restore the correct electrical supply and verify that the indicator illuminates as expected.

Installation reminder
The actual mounting hole tolerance and maximum panel thickness must be checked against the drawing for the ordered configuration. Do not assume that every 16mm indicator has identical thread dimensions.
How to Wire an AD16 Red Light Indicator
The FL1P-16NA-1 uses a two-pin screw-terminal connection. Each terminal provides a connection point for the electrical circuit. An alternative factory-installed wire-lead arrangement can be discussed when a project requires a pre-wired red light indicator.
2-Pin Screw Terminal Wiring
- Disconnect the power supply before handling the indicator terminals.
- Identify the required rated voltage and AC/DC configuration from the product label and approved drawing.
- Prepare conductors with suitable insulation and wire dimensions for the terminal design.
- Insert the conductors into the correct terminal positions.
- Tighten the terminal screws according to the manufacturer’s instructions.
- Check that no exposed conductor can contact an adjacent terminal or conductive surface.
- Restore the supply only after checking the complete circuit.
Factory-Installed Wire Lead Option
For equipment manufacturers using standardized internal harnesses, a pre-wired indicator can simplify panel assembly. The factory can discuss the required wire length, conductor specification, connector type and termination method. These details should be agreed before production rather than assumed from the standard terminal version.
Which Wiring Method Should You Choose?
The screw-terminal version is useful when installers need to connect conductors directly at the indicator. A pre-wired version can be more convenient when the equipment uses a prepared wiring harness and standardized assembly process. The better choice depends on the cabinet layout, production method, maintenance requirements and purchasing specification.
Always confirm terminal layout, rated voltage, AC/DC type and wiring instructions before connecting the red light indicator to an electrical circuit. Installation must be performed by qualified personnel following applicable electrical safety procedures.
Industry Knowledge Center: Plastic Indicator Selection
How Does an LED Signal Indicator Work?
An LED signal indicator converts electrical energy into visible light. Its internal electrical design must match the specified input voltage and supply type. When the circuit is energized correctly, the LED illuminates and provides a visual signal to the operator.
Why Is Voltage Matching Important?
An indicator is an electrical component, not simply a colored lamp. Its internal LED and current-limiting arrangement must be designed for the intended supply. Applying a voltage outside the confirmed rating can cause incorrect operation or component damage. Buyers should always specify the exact voltage rather than ordering based only on a broad customization range.
Plastic Versus Metal Indicator Housing
Plastic indicators are commonly considered for lightweight, electrically insulated and cost-conscious panel designs. Metal indicators are frequently selected when a different mechanical appearance, housing material or mechanical strength is required. The choice should be based on the operating environment, mechanical design, electrical requirements and total assembly cost.
Understanding Phantom Illumination
A low-voltage LED indicator may sometimes show a faint glow even when the equipment is expected to be switched off. This can happen when small leakage currents, induced voltages or electronic switching circuits allow a small current to pass through the indicator. The effect does not automatically mean that the indicator is defective.
When faint illumination occurs, check the control circuit, switching device, leakage current, wiring arrangement and grounding conditions. A qualified electrical engineer can determine whether a suitable circuit modification or compatible indicator configuration is needed. Do not install additional resistors or bypass components without checking the circuit design and safety requirements.
What Should Buyers Check Before Mass Production?
- Approve a sample against the final mechanical drawing.
- Verify rated voltage and AC/DC requirements.
- Check the color and illumination under actual operating conditions.
- Confirm mounting nut compatibility and panel thickness.
- Verify terminal arrangement and wiring clearance.
- Review the relevant certification and conformity documents.
- Agree packaging, identification and inspection requirements.
Buyer Guide: How to Select the Right AD16 Red Light Indicator
1. Confirm the Mounting Size
The first step is checking the existing panel opening. This product is designed for a 16mm mounting application. Buyers replacing an existing signal lamp should measure the panel opening and verify the thread and panel thickness rather than relying only on the product’s industry designation.
2. Confirm the Electrical Rating
Specify the exact voltage required by the equipment, such as 12V, 24V, 110V or 220V, where supported by the agreed configuration. Also identify whether the circuit uses AC or DC. The 3–480V customization range is not a substitute for a confirmed rated voltage.
3. Select the Correct LED Color
Choose red, green, yellow, blue or white according to the control-system design. If the red light indicator is used for an alarm, the meaning should be defined in the electrical documentation and operating instructions.
4. Choose the Wiring Arrangement
The supplied product configuration uses two-pin screw terminals. If your production line uses a preassembled wiring harness, ask FILN whether factory-installed wires can be provided for the required application.
5. Compare Plastic and Metal Housing Options
| Selection Factor | Plastic Indicator | Metal Indicator |
|---|---|---|
| Weight | Generally lighter | Generally heavier |
| Electrical Insulation | Insulating housing material | Conductive housing; electrical isolation design is important |
| Mechanical Strength | Depends on plastic grade and structure | Often selected for higher mechanical demands |
| Cost Consideration | Often economical for repeated assembly | Depends on metal, finish and design |
| Typical Selection | General equipment and control panels | Applications requiring metal housing characteristics |
This is a general material comparison, not a claim that every plastic or metal model has identical performance. Alternative metal housing materials may include plated brass, stainless steel or zinc alloy. Confirm the exact material and environmental rating for the selected model.
6. Certification Requirements
The supplied information identifies CE, VDE, RoHS and CCC for this product offering. Buyers should state the target market and request the applicable documents for the exact configuration. ISO9001 refers to the manufacturer’s quality management system, not an individual product certificate.
7. Size Selection Reference
| Mounting Size | Approximate Inch Equivalent | Typical Application |
|---|---|---|
| 6mm | 0.236 in | Compact electronic equipment |
| 8mm | 0.315 in | Small control panels |
| 10mm | 0.394 in | Compact industrial equipment |
| 12mm | 0.472 in | Small electrical control interfaces |
| 16mm | 0.630 in | AD16 distribution and equipment panels |
| 22mm | 0.866 in | Larger control-panel interfaces |
Inch values are approximate conversions. The approved product drawing takes priority for actual mounting dimensions and tolerances.
8. RFQ Information for Purchasing Departments
To help FILN evaluate the correct red light indicator configuration, include the following details in your request:
- Product type and model number
- Mounting hole size and panel thickness
- Rated voltage and AC/DC requirement
- Required LED color
- Head shape and appearance
- Terminal or factory wire-lead requirement
- Wire length and connector requirements, if applicable
- Required product certifications and target market
- Application environment
- Estimated order quantity and packaging requirements
- OEM logo, custom marking or other special requirements
- Required delivery schedule for quotation evaluation
Providing these specifications helps FILN engineering and sales teams confirm product compatibility and quotation requirements more efficiently.
| Request a Quotation | Request Technical Drawing |
| Request Datasheet PDF | Request 3D CAD Model |
FILN Manufacturing and Engineering Capabilities
FILN is a manufacturer of industrial indicator lights and electrical control components, supporting product development, engineering communication, customized configurations and production supply. For buyers sourcing an AD16 red light indicator, working directly with a manufacturer provides an opportunity to discuss technical details before sample approval and volume purchasing.

Research and Development
FILN supports product engineering and development for indicator lights and related electrical components. Engineering discussions can cover mounting dimensions, lighting colors, electrical ratings, terminal arrangements and customized product requirements.
OEM and ODM Support
OEM and ODM cooperation can be discussed for customers who need customized electrical components or product configurations. Buyers can provide existing drawings, product samples or application requirements for technical evaluation.
Production and Assembly
FILN integrates manufacturing, assembly and product inspection activities for electrical control components. This manufacturing structure supports communication between product development, production and purchasing teams.
Customization and Technical Communication
- Customized indicator voltage according to the agreed electrical design.
- Selection of red, green, yellow, blue and white LED colors.
- Discussion of screw terminals or factory-installed wiring.
- Product drawings and dimensional confirmation.
- OEM identification and customized product requirements.
- Sample evaluation before production approval.
- Technical communication for distributors and equipment manufacturers.
For international buyers, FILN can discuss product documentation, sample arrangements and certification requirements relevant to the intended market. Certification support means assisting customers in confirming applicable documents or requirements; it does not mean that every product automatically carries every company-level certification.
Factory Direct Supply of AD16 Plastic Indicator Lights
Yueqing Yulin Electronic Co., Ltd. is an electrical component manufacturer based in Wenzhou, Zhejiang, China. Established in 2006, the company operates under the FILN brand and integrates research and development, production and sales. Its product range includes indicator lights, push-button switches, rocker switches, toggle switches and related electrical components.

Manufacturing Background
FILN has experience in manufacturing electrical switches and indicator products for international markets. The company serves customers in more than 100 countries and operates manufacturing facilities with production lines and an independent testing laboratory. Its operations use an ISO9001 quality management system.
Product Range
- Plastic indicator lights and metal indicator lights.
- Industrial push-button switches.
- Rocker and boat switches.
- Toggle switches and related control components.
- Customized electrical components for OEM applications.
Why Work with the Manufacturer?
Direct technical communication helps purchasing teams clarify product dimensions, voltage requirements, wiring options, customization and documentation. Instead of selecting a component solely from a product photograph, buyers can submit their equipment requirements for technical review before approving a sample or production order.
Certification Clarification
FILN’s company-level quality and certification capabilities should be distinguished from the certificates applicable to an individual product. ISO9001 refers to the company’s quality management system. For the AD16 red light indicator, request the relevant CE, VDE, RoHS and CCC documentation and verify that the certificate scope covers the exact ordered configuration.
Explore More 16mm Plastic Indicator Lights
Compare additional 16mm plastic panel indicators for different equipment designs and electrical requirements.
Considering a Metal Indicator Instead?
Explore FILN metal indicator lights for applications where a metal housing or different mechanical design is preferred.
| Visit FILN Official Website | Contact the Sales Team |
Frequently Asked Questions About AD16 Red Light Indicators
1. What is an AD16 red light indicator?
An AD16 red light indicator is a panel-mounted LED signal lamp commonly used in electrical distribution cabinets and industrial control panels. This FILN version features a 16mm mounting size, a round raised plastic head, two-pin screw terminals and nut-fixed installation. It can also be supplied in green, yellow, blue and white according to the required configuration.
2. What is the mounting size of the FL1P-16NA-1 indicator?
The FL1P-16NA-1 is designed for a 16mm panel mounting application. The actual mounting hole tolerance, thread dimensions and suitable panel thickness should be checked against the approved technical drawing before machining the panel or placing a bulk order. This is especially important when replacing an existing AD16 indicator.
3. What voltage options are available for this plastic red light indicator?
The specified customization range is 3–480V. The exact rated voltage must be selected according to the equipment circuit and confirmed with FILN before production. Buyers should also identify whether the application requires AC or DC. The full customization range does not mean every voltage configuration is a standard stocked item.
4. What LED colors can I order?
The available LED color options include red, green, yellow, blue and white. Red is commonly used for an assigned alarm or warning signal, while other colors can represent different equipment conditions. The actual meaning depends on the control system. Specify the required color and application when requesting a quotation or sample.
5. Does the AD16 indicator use pin terminals or wire leads?
The specified FL1P-16NA-1 configuration uses two-pin screw terminals. If your production process requires a ready-to-connect wire harness, factory-installed wires can also be discussed. Wire length, connector type and conductor specifications should be confirmed before production so that the delivered component matches the equipment wiring design.
6. What is the difference between screw-terminal and pre-wired indicators?
Screw-terminal indicators allow installers to connect conductors directly at the product, which is useful for maintenance and flexible cabinet wiring. Pre-wired indicators can simplify repetitive assembly when an equipment manufacturer uses standardized harnesses. Screw terminals require appropriate wire preparation and tightening, while pre-wired versions require confirmation of wire length and connector compatibility.
7. How is the AD16 plastic indicator installed?
Prepare a compatible circular panel opening according to the product drawing. Insert the indicator from the front of the panel, position the threaded section through the opening and rotate the supplied plastic nut onto the thread from the rear. Tighten until the indicator is secure without excessive force. Complete the electrical connection after confirming the correct voltage and wiring arrangement.
8. What accessories are included with this product?
The stated package includes one plastic indicator light and one plastic mounting nut. The nut is used to secure the threaded indicator body behind the control panel. Additional accessories, wire leads or connectors should not be assumed to be included unless they are specifically listed in the confirmed quotation or purchase specification.
9. Why choose a plastic indicator instead of a metal indicator?
Plastic indicators are often selected for lightweight construction, electrical insulation characteristics and economical repeated assembly. Metal indicators may be more suitable when a particular metal housing, appearance or mechanical strength is required. The best option depends on the installation environment, panel design, budget and engineering requirements. Compare the actual specifications rather than material names alone.
10. Is this red light indicator waterproof?
A specific ingress protection rating has not been confirmed in the supplied FL1P-16NA-1 product information. Buyers should not assume that the plastic housing provides waterproof or washdown protection. If the equipment is exposed to water, rain, salt spray or high humidity, state the required IP rating and application conditions so FILN can evaluate a suitable verified configuration.
11. Which certifications are available for this product?
The supplied product information identifies CE, VDE, RoHS and CCC marks for this offering. Buyers should request the relevant documentation and verify the certificate scope for the exact configuration and destination market. ISO9001 is a company-level quality management system certification rather than an individual indicator light certification.
12. Can FILN customize the voltage of an AD16 indicator?
Yes. The stated customization range is 3–480V, subject to technical confirmation. Buyers should provide the exact operating voltage, AC/DC type, required LED color and application information. FILN can review the requirements and confirm the appropriate configuration before sample evaluation or production. A broad voltage range should not be treated as an interchangeable rating for one unit.
13. Can I request a customized wire length or connector?
Factory-installed wires can be discussed for projects that require a pre-wired connection. Buyers should provide the required wire length, conductor specification, connector model and terminal arrangement. These details allow the engineering and sales teams to evaluate whether the requested harness can be incorporated into the production configuration.
14. Why does an LED indicator sometimes glow faintly when switched off?
A low-voltage LED indicator may show faint illumination because of leakage current, induced voltage or electronic switching components in the connected circuit. This condition is not necessarily a product defect. Check the control circuit and switching arrangement with a qualified electrical engineer. Any additional circuit component must be selected according to the system voltage and safety requirements.
15. Can this AD16 red light indicator be used in distribution cabinets?
Yes. Distribution cabinets are one of the typical applications for AD16 panel indicators. A red light indicator can communicate a designated alarm, warning or operating condition on the cabinet front. The actual signal function should be defined by the electrical control system. Confirm the mounting dimensions and electrical rating before installing the product.
16. Does FILN provide samples and technical drawings?
Buyers can contact FILN to request sample information and available technical drawings for product evaluation. A sample helps confirm the actual head appearance, mounting arrangement, terminal layout and illumination. For OEM projects, provide the intended application and mechanical requirements so the engineering team can determine which documentation is applicable.
17. Can FILN supply OEM or customized AD16 indicators?
FILN supports OEM and customized electrical component projects. Depending on the product configuration, buyers can discuss voltage, LED color, wiring arrangements, product identification and other project requirements. Providing an existing drawing, sample or technical specification helps the manufacturer assess compatibility and the scope of customization.
18. Which industries commonly purchase AD16 plastic indicators?
Typical purchasing sectors include electrical cabinet manufacturing, industrial machinery, laboratory equipment, renewable energy equipment, marine electrical systems and household appliance production. The suitability of a particular red light indicator depends on the equipment’s voltage, mounting dimensions, environmental conditions and required product documentation.
19. How can I purchase this AD16 indicator directly from FILN?
You can review the product details and purchasing information through the FILN AD16 plastic indicator product page. For bulk purchasing, OEM requirements or a technical quotation, contact inquiry@cnylin.com.cn with your voltage, color, quantity and application information.
20. Where can I find more 16mm plastic and metal indicator lights?
You can browse the 16mm plastic indicator light collection for additional plastic options. If your project requires a metal housing, explore the 16mm metal indicator light collection. FILN can also help compare product configurations for your equipment application.
Need an AD16 Indicator for Your Next Project?
Send FILN your required voltage, LED color, mounting details, connection method and purchasing quantity. Our sales and engineering teams can help review the product configuration and quotation requirements.
