Product Category

Search

16mm Diamond Head LED Indicator Lamp Snap-In Pin Terminal Pilot | FILN

Product Specifications

  • Model: FL1P-16BJ-1
  • Color: Red, Green, Yellow, Blue, White
  • Shape: Multi-faceted Diamond High Head
  • Material: Nylon PA66 Insulated Housing
  • Finish Type: Faceted Polycarbonate / Nylon Finish
  • Light Source Type: LED (60,000 Hours Rated Service Life)
  • Rated Voltage: 3V to 480V AC/DC (Customizable)
  • Rated Current: ≤ 20 mA
  • Mounting Type: 16mm (Ø0.630 in) Panel Mount with Hex Nut
  • Terminal / Wiring: 2-Pin Solder / Quick-Connect Terminals (Pre-wired Lead Optional)
  • Protection Rating: IP50
  • Product Size: 16mm (Ø0.630 in) Mounting Hole
  • Certifications: CE, VDE, RoHS, ISO9001 Certified
  • Download PDF: FL1P-16BJ-1 16mm Diamond Head LED Indicator Light Datasheet PDF
  • Email: inquiry@cnylin.com.cn

About this item

  • High-Visibility Diamond Lens: Multi-faceted high head maximizes light dispersion for clear status indication on high-end control panels.
  • Durable Industrial Construction: Engineered with Nylon PA66 insulated housing, IP50 protection, ≤20mA draw, and 60,000-hour LED life.
  • Fast Panel Installation: Fits standard 16mm (Ø0.630 in) cutouts using a hex nut and 2-pin solder/quick-connect terminals.
  • Versatile Equipment Integration: Ideal for industrial machinery, electrical cabinets, automation controls, and new energy systems.
  • OEM & ODM Customization: Supports custom voltages (3V–480V AC/DC), pre-wired leads, and Red, Green, Yellow, Blue, or White LEDs.

110V 16MM diamond led metal indicator light

Product Summary

The FILN FL1P-16BJ-1 Diamond Head LED Indicator Lamp is a 16mm (Ø0.630 in) panel-mount plastic pilot light engineered with a multi-faceted diamond high head, Nylon PA66 insulated housing, 2-pin solder/quick-connect terminals, and a matching hex mounting nut. Built by an experienced industrial indicator lamp manufacturer for OEM equipment builders, control panel assemblers, new energy system integrators, and wholesale electrical distributors, this Diamond Head LED Indicator Lamp delivers enhanced optical brilliance on high-end equipment panels across 3V to 480V customizable AC/DC circuits. Rated at IP50 ingress protection, ≤ 20 mA operating current, and 60,000 hours rated service life, this Diamond Head LED Indicator Lamp supports custom voltage, pre-wired lead options, and Red, Green, Yellow, Blue, or White LED colors for bulk B2B procurement and direct online ordering.

Key Takeaways

  • Model & Panel Cutout: Model FL1P-16BJ-1 requires a standard 16mm (Ø0.630 in) circular panel cutout and features a protruding faceted diamond high head.
  • Enhanced Faceted Brilliance: The diamond-cut high-profile lens refracts light from the internal 5mm LED for crisp visual sparkle on high-end machinery and instrument panels.
  • Secure Hex Nut Mounting: Supplied as 1 × plastic indicator light with 1 × hex nut that threads onto the body from behind the panel for vibration-resistant retention.
  • 2-Pin Terminal & Pre-Wired Options: Standard configuration features 2-pin terminals for spade connectors or soldering, with factory pre-wired lead versions available upon request.
  • Wide Custom Voltage Range: Configurable from 3V to 480V AC/DC (including 12V, 24V, 48V, 110V, 220V, and 380V) to match control cabinets, appliances, and power distribution gear.
  • Insulated PA66 Construction: Nylon PA66 shell, base, and faceted lens provide electrical isolation, lightweight handling, and thermal tolerance from −15°C to +80°C.
  • Non-Polarity 5mm LED: Integrated 5mm non-polarity LED paired with a carbon film current-limiting resistor simplifies DC wiring without positive/negative lead sorting.
  • Ingress Protection Boundary: Specified at IP50 dust-protected rating for enclosed indoor panels and consoles; not intended for outdoor washdown or liquid immersion.
  • Product Compliance Marks: Stated product markings for this offering include CE, VDE, RoHS, ISO9001, and CCC; buyers should confirm configuration-specific certificates prior to bulk release.
  • Factory Direct B2B & Direct Purchase: Available for immediate online ordering or factory-direct OEM/ODM customization in voltage, wire harnesses, and five LED colors.

What Is a Diamond Head LED Indicator Lamp?

Definition: A Diamond Head LED Indicator Lamp is a panel-mounted visual signaling component designed with a faceted, high-profile translucent lens head that refracts internal LED illumination for heightened visual clarity on equipment fascias. Across industrial panel indicators, manufacturers divide products into two main housing families: metal indicator lights and plastic indicator lights.

Function & Purpose: The core function of a Diamond Head LED Indicator Lamp is to translate electrical circuit states—such as main power presence, active operation, standby mode, or fault warning—into an unmistakable optical signal visible from both frontal and oblique viewing angles.

Structure & Series Options: Each assembly combines a faceted lens head, an insulated polymer body, an internal carbon film current-limiting resistor, and a 5mm LED chip. Across the broader FILN plastic indicator series, standard mounting cutouts include 6mm, 8mm, 10mm, 12mm, 16mm, and 22mm, offered in five LED colors (Red, Green, Yellow, Blue, and White) and three termination styles: 2-pin terminals, pre-wired direct wire leads, and screw terminals. Whereas metal indicator lights offer flat, convex, or concave machined bezels for heavy impact, plastic indicator lights emphasize dielectric isolation, light weight, and versatile head geometry such as the faceted diamond high head.

Industrial Value & Operating Principle: When rated AC or DC voltage is applied across the 2-pin terminals, the internal carbon film resistor regulates current to ≤ 20 mA so the LED emits steady light through the faceted dome. Its Nylon PA66 body eliminates chassis grounding hazards and lowers unit weight and procurement cost across electrical distribution cabinets, laboratory instruments, new energy consoles, marine dashboards, and household appliances.

FILN 16mm Diamond Head LED Indicator Lamp FL1P-16BJ-1 with 2-pin terminals and hex nut

Request a Sample Buy This Diamond Head Indicator Direct
Request Datasheet PDF Request 3D Model / CAD
Explore All Plastic Panel Indicator Lights from FILN Factory (Opens in New Window)
Browse All Plastic Indicator Lights

Comparing 16mm options or metallic bezels? View More 16mm Plastic Indicator Lights, browse Metal LED Indicator Lights, or explore Recommended 16mm Metal Indicator Lights.

Product Overview

The FILN FL1P-16BJ-1 is a factory-manufactured 16mm Diamond Head LED Indicator Lamp designed for clear status indication on control panels and commercial equipment. Mechanically, the lamp features a protruding diamond-cut faceted high head that sparkles brightly when energized, paired with a threaded body and matching hex nut that locks the unit securely into a 16mm circular panel hole from behind.

Electrically, the internal circuit integrates a 5mm non-polarity LED with a carbon film current-limiting resistor connected to 2-pin metal terminals (with factory pre-wired lead configurations also available for OEM harnesses). Because the LED emitter is non-polar, technicians can wire low-voltage DC or AC circuits within the ordered voltage rating (3V to 480V customizable) without polarity errors. Molded from Nylon PA66 for the shell, base, and faceted lens, this Diamond Head LED Indicator Lamp combines lightweight construction, strong dielectric insulation, and heat endurance up to +80°C. Stated product compliance markings include CE, VDE, RoHS, ISO9001, and CCC, with IP50 dust-protected enclosure performance.

Quick Specifications

Specification Parameter Technical Value / Standard
Product Description 2-Pin Terminal Plastic Diamond Head LED Indicator Lamp
Indicator Light Model FL1P-16BJ-1
Mounting Hole Size 16 mm (Ø0.630 in) circular panel cutout
Operating Voltage 3V–480V AC/DC customizable (standard ratings: 3V, 6V, 12V, 24V, 48V, 110V, 220V, 380V, 480V)
LED Illumination Colors Red (R), Green (G), Yellow (Y), Blue (B), White (W)
Wiring Method 2-Pin terminals standard (pre-wired lead version available upon custom production request)
Head Type Diamond-faceted high head (protruding round diamond-cut lens)
Mounting Style Threaded body with hex nut fixation
Included Accessories 1 × Plastic Indicator Light, 1 × Hex Mounting Nut
Product Certifications CE, VDE, RoHS, ISO9001, CCC (stated for this offering; confirm exact certificate scope per voltage)
Surface Quality Smooth and clean molded finish without burrs, oxidation, cracks, or visible defects
Assembly Requirements Head and base properly fitted in place with no rotation, detachment, tilt, or deformation

Performance Parameters

Parameter Rated Value & Test Condition
Rated Operating Voltage 3V–480V DC/AC customizable per customer specification
AC Supply Frequency 50 / 60 Hz
Rated Operating Current ≤ 20 mA at nominal rated voltage
Rated Power Consumption Approx. 0.2 W
Insulation Resistance ≥ 100 MΩ (tested at 500 V DC applied between terminals/leads and housing)
Dielectric Strength / Voltage Proof 1500 V AC with no breakdown or flashover
Rated Operating Life 60,000 hours under specified operating conditions (rated service life, not a warranty period)
Ingress Protection Rating IP50 (dust-protected for enclosed indoor panels; not rated for water jets or immersion)
Compliance & Certifications CE, VDE, RoHS, ISO9001, CCC (stated product markings; request documentation for specific configuration)

Component Materials

Component / Accessory Material Specification Engineering Purpose
Shell / Enclosure Nylon PA66 Provides electrical insulation, threaded mechanical strength, and thermal endurance
Lamp Holder / Base Nylon PA66 Supports internal LED and resistor assembly while isolating live conductors from the panel
Lampshade / Diamond Lens Nylon PA66 Refracts 5mm LED emission through faceted diamond geometry for crisp visual sparkle
Luminescent Source 5mm Non-Polarity LED Delivers long operating life, low power draw, and polarity-free DC/AC wiring
Current-Limiting Resistor Carbon Film Resistor Regulates forward LED current to ≤ 20 mA across the specified operating voltage
Termination / Optional Wire 2-Pin Metal Terminals (or optional PVC AWG22 wire leads upon custom request) Supports female quick-disconnect receptacles, direct soldering, or factory pre-wired harnesses
Mounting Hardware 1 × Hex Mounting Nut included (O-ring / lock washer not specified in package) Threads onto the 16mm housing from the rear to clamp the indicator tightly onto the panel

Material Selection Note: Nylon PA66 is selected by FILN for the shell, base, and diamond lens because it delivers reliable dielectric isolation, heat resistance up to +80°C, lightweight handling, and cost-efficient molding for industrial indicator lamps.

Environmental Performance

Environmental Test / Condition Specified Limit / Verification Protocol
Applicable Series Scope General operating range for FILN Plastic Indicator Light series (FL1P-16BJ-1)
Operating & Storage Temperature −15°C to +80°C
Operating Relative Humidity ≤ 85% RH at +40°C
High Temperature Endurance Test 96 hours continuous exposure at 80 ± 2°C
Low Temperature Endurance Test 96 hours continuous exposure at −15 ± 2°C
Constant Temperature & Humidity Test 96 hours at 40 ± 2°C and 90%–95% RH
Temperature Cycling Test Alternating −15°C (30 min) and +80°C (30 min), 5 cycles total

LED Specification

Absolute Maximum Ratings (LED Emitter)

Parameter Symbol Maximum Limit
Maximum Forward Current IFP 20 mA
Reverse Voltage VR 5 V
Power Dissipation PD 60 mW
LED Operating Temperature TOPR −15°C to +80°C
LED Storage Temperature TSTG −15°C to +100°C
Lead-Free Soldering Temperature TSOL Max. 260°C for 3 seconds max.

Electro-Optical Characteristics (Measured at Ta = 25°C)

Characteristic Test Condition Red Green Yellow Blue White
Forward Voltage (VF) IF = 20 mA 1.8–2.2 V 3.0–3.2 V 2.0–2.2 V 3.0–3.2 V Not specified in the available product data
Reverse Current (IR) VR = 5 V Max. 3 µA Max. 3 µA Max. 3 µA Max. 3 µA Max. 3 µA
Viewing Angle (2θ½) IF = 20 mA 60° (typ.) 35° (typ.) 35° (typ.) 35° (typ.) Not specified in the available product data
Luminous Intensity (Iv) IF = 20 mA 1000–1500 mcd 8000–10000 mcd 1000–1500 mcd 2000–3000 mcd Not specified in the available product data
Recommended Forward Current (IF) Nominal 20 mA (typ.) 20 mA (typ.) 20 mA (typ.) 20 mA (typ.) 20 mA (typ.)
Dominant Wavelength (λd) IF = 20 mA 620–625 nm 520–525 nm 588–592 nm 460–465 nm Not specified in the available product data

Standard Test Conditions

Test Condition / Calibration Rule Specified Standard Value
Standard Ambient Temperature 5°C to 35°C (unless otherwise specified)
Standard Relative Humidity 45% to 85% RH
Standard Atmospheric Air Pressure 86 to 106 kPa (860 to 1060 mbar)
Photometric Calibration Standard Luminous intensity and dominant wavelength calibrated to CIE international standard human eye response curve
Measurement Tolerances Luminous intensity tolerance: ±15%; Forward voltage measurement tolerance: ±0.1 V

Applications by Industry

The FILN FL1P-16BJ-1 Diamond Head LED Indicator Lamp is tailored for high-end equipment panels, electrical cabinets, and commercial devices that benefit from faceted optical sparkle, electrical insulation, and secure hex-nut retention. Because this model is rated at IP50 for dust protection within −15°C to +80°C, all deployment environments below apply to indoor cabinets, enclosed panels, or sheltered operator consoles; for outdoor rain, marine deck spray, or pressurized washdown, buyers should confirm an IP65/IP67 sealed series with FILN.

1. High-End Machinery, Control Cabinets & Power Distribution

On CNC machining centers, automation consoles, switchgear panels, and power distribution cabinets, a 16mm Diamond Head LED Indicator Lamp provides prominent visual feedback across 110V, 220V, 380V, or 480V AC control circuits. The faceted high head catches ambient and internal LED light to stand out on dense control fascias, while the Nylon PA66 body provides dielectric isolation and hex-nut clamping stability.

2. New Energy Equipment & Laboratory Instruments

Indoor energy storage inverter cabinets, EV charger test benches, and laboratory analytical equipment utilize 16mm diamond-head pilot lamps in R/G/Y/B/W colors to indicate charging stages, bus voltage presence, and system faults. The non-conductive PA66 enclosure avoids electrical interference near sensitive test circuitry and tolerates panel temperatures up to +80°C.

3. Household Appliances & Commercial Equipment

Premium espresso machines, water purification systems, commercial ovens, and countertop appliances frequently select a Diamond Head LED Indicator Lamp for its jewel-like illuminated appearance. Compared with machined metal housings, PA66 plastic reduces unit cost and panel weight while resisting elevated thermal conditions within the −15°C to +80°C specification.

4. Yacht Bridge Consoles & Automotive Modifications

Inside enclosed yacht navigation cabins and custom 12V/24V automotive dashboards, the hex-nut-mounted 16mm Diamond Head LED Indicator Lamp resists loosening under cabin vibration and provides crisp daytime and nighttime legibility. Where direct water splash or salt mist occurs on open marine decks, select an IP65/IP67 sealed indicator instead of IP50.

Plastic vs. Metal Indicator Light Selection Context: Qualitatively, plastic indicator lights are chosen when buyers prioritize light weight, electrical insulation, decorative faceted lens options, and economical B2B unit cost. Metal indicator lights are selected when panels face heavy mechanical impact, vandal risk, or harsh outdoor environments. Always verify that IP50 ingress protection and −15°C to +80°C operating limits match your enclosure conditions.

Industrial control cabinet, new energy, and equipment applications of FILN Diamond Head LED Indicator Lamp

LED Indicator Color Meanings and Application Guide

Choosing the right LED color helps operators interpret equipment states quickly and accurately. Note that indicator-light color conventions vary by equipment manufacturer, control-system standard (such as IEC 60073 or NFPA 79), country, and industry sector—no single color carries one universal meaning across every machine without checking the control schematic. FILN provides single-color configurations as standard on FL1P-16BJ-1, with dual-color and tri-color configurations available across compatible FILN series upon engineering confirmation.

LED Color Common Industrial Meaning Typical Equipment Status Typical Applications Recommended Environment Alternative Meanings & Selection Notes
Red (620–625 nm) Emergency, fault, overload, or stop condition Alarm triggered, breaker trip, motor fault, or energized live bus Distribution cabinets, CNC fault panels, high-voltage power alerts Indoor control panels & enclosed consoles (IP50) In some heating appliances or regional power boards, red denotes “live power / heater active”; 60° viewing angle + diamond facets maximize alert notice
Green (520–525 nm) Normal operation, ready state, or safe to proceed System running, inverter online, pump active, or circuit closed Automation panels, new energy storage systems, household appliances Brightly lit workshops & control rooms (IP50) Highest luminous intensity (8000–10000 mcd) produces vivid diamond sparkle; under certain utility conventions, green indicates open/de-energized breaker
Yellow / Amber (588–592 nm) Caution, abnormal condition, standby, or warm-up Approaching threshold, pre-heating cycle, or operator attention needed Laboratory test equipment, hydraulic units, commercial appliances Enclosed control panels & equipment fascias (IP50) Commonly paired with standby or charging transitions; separate physically from red alarm lamps under warm indoor lighting
Blue (460–465 nm) Mandatory action, auxiliary mode, or reset required Remote mode active, manual override, or communication active High-end machinery, yacht consoles, custom automotive dashboards Indoor operator consoles & vehicle cabins (IP50) 2000–3000 mcd output creates a distinctive jewel-like glow through the faceted lens without triggering fault confusion
White General power presence, neutral status, or panel illumination Main control supply energized, neutral phase active, or status check Power distribution boards, laboratory benches, premium appliances Indoor panels & clean instrumentation (IP50) Ideal when green and red are reserved strictly for run/fault states; exact photometric mcd/nm values are not specified in the available product data

How to Install a Diamond Head LED Indicator Lamp

The FILN FL1P-16BJ-1 uses a threaded barrel and matching hex mounting nut for secure fixation in a 16mm circular panel opening. Follow the sequential procedure below for reliable mechanical and electrical installation:

  1. Required Tools: 16mm (Ø0.630 in) panel hole punch or stepped drill bit, deburring tool, hex nut driver or adjustable wrench, multimeter/voltage tester, and insulated female quick-disconnect crimpers or soldering iron.
  2. Mounting Preparation: Ensure the panel surface is clean, flat, and free of metal burrs, oil, or paint buildup. Confirm that ambient operating temperature remains within −15°C to +80°C.
  3. Mounting Hole Requirements: Punch or drill a circular mounting hole measuring 16mm (Ø0.630 in) in the equipment panel. Verify sufficient rear clearance behind the panel for the threaded body and 2-pin terminals.
  4. Product Orientation: Unthread the supplied hex nut from the indicator barrel, then insert the 2-pin terminal end through the 16mm cutout from the front operator side of the panel until the diamond-faceted head flange rests flush against the panel face.
  5. Hex Nut Fixation Steps: Slide the supplied hex nut over the rear 2-pin terminals onto the threaded PA66 barrel from behind the panel, and rotate it clockwise along the threads until the indicator is firmly clamped against the panel without over-torquing the plastic threads.
  6. Wiring Preparation: Confirm that the indicator’s rated voltage (specified on the body/order label within the 3V–480V customizable range) matches your control circuit voltage before connecting conductors.
  7. Electrical Connection: Attach insulated female quick-disconnect spade sleeves onto the 2-pin terminals, or solder wire leads cleanly (max. 260°C for ≤ 3 seconds) and cover each pin with heat-shrink insulation tubing.
  8. Panel Fit & IP50 Sealing Notes: Verify that the round diamond high head sits squarely on the front panel without tilt. Because this model is rated IP50 (dust-protected, without an O-ring gasket), deploy it inside enclosed cabinets or dry indoor panels protected from water spray.
  9. Inspection After Installation: Gently check that the hex nut is snug, verify that rear terminal insulation sleeves cover all exposed metal, and energize the circuit to confirm crisp diamond-head illumination.
  10. Common Installation Mistakes: Over-tightening the hex nut onto Nylon PA66 threads (stripping threads), soldering pins for longer than 3 seconds, leaving bare 2-pin terminals uninsulated in crowded panels, or applying a higher voltage than ordered.
  11. Safety Precautions: Always disconnect and lock out main electrical power before drilling panels or wiring 110V–480V AC/DC circuits. Never exceed the ordered voltage rating or the −15°C to +80°C temperature range.

16mm cutout and hex nut mounting procedure for FILN Diamond Head LED Indicator Lamp

How to Wire a Plastic Indicator Light (2-Pin Terminals vs. Pre-Wired Leads)

Safety First — Cut Power Before Wiring: Always switch off upstream breakers and verify zero voltage with a multimeter before connecting any indicator lamp, particularly on 110V, 220V, 380V, or 480V AC/DC control lines.

How to Wire 2-Pin Terminal Indicator Lights (Standard FL1P-16BJ-1): Model FL1P-16BJ-1 features two rigid metal terminals extending from the rear base. Installers either push matching insulated female quick-connect crimp receptacles firmly onto each pin or solder hookup wires directly to the pins (maximum 260°C for 3 seconds max. to protect internal solder joints) and slide heat-shrink tubing over each terminal. Because this unit uses a 5mm non-polarity LED, DC low-voltage wiring does not require sorting positive and negative pins.

How to Wire Pre-Wired Indicator Lights (Custom Factory Option): FILN can also produce the FL1P-16BJ-1 with factory-soldered insulated wire leads. Pre-wired leads connect directly into the circuit via quick-connect crimp splices, screw terminal blocks, or solder joints wrapped securely with electrical insulation tape or heat-shrink tubing.

Comparison Dimension 2-Pin Terminal Indicator Light (FL1P-16BJ-1 Standard) Pre-Wired Indicator Light (Custom Factory Option)
Termination Structure Two rigid metal spade/solder pins protruding from the rear PA66 base Factory-attached insulated PVC wire leads sealed at the lamp base
Key Advantages Compact rear profile; mates rapidly with female quick-disconnect harness plugs; allows technician to choose custom wire length on site; easy module replacement Eliminates pin crimping or soldering on the assembly line; leaves zero exposed bare metal pins behind crowded control panels; custom lengths & plugs available
Limitations Requires female receptacle crimping or careful ≤ 3 sec soldering plus heat-shrink insulation Requires inline splice or terminal block; wire length must be specified before factory production
Best Application Scope Control cabinets with standardized spade harnesses, serviceable machinery panels, laboratory gear, and shallow enclosures High-volume OEM appliances, commercial equipment, and tight wiring looms requiring pre-terminated leads

Industry Knowledge Center

Optical Engineering of Faceted Diamond Lenses & Why It Matters: Standard smooth-dome pilot lights emit light uniformly but can appear muted under bright overhead factory lighting. A faceted diamond head introduces angled internal and external prism faces that scatter and concentrate light from the 5mm LED, increasing perceived brightness and visual contrast across high-end control panels while consuming only ~0.2 W over a 60,000-hour rated operating life.

Industry Standards & B2B Compliance Checks: Procurement teams sourcing panel indicators for global distribution typically verify alignment with IEC 60947-5-1 control-circuit device rules, CE directives, VDE safety evaluations, CCC for China, and RoHS material restrictions. Always cross-check the stated product markings (CE, VDE, RoHS, ISO9001, CCC for FL1P-16BJ-1) against your end-product certification requirements and request batch certificate copies when needed.

Troubleshooting Phantom Illumination & Routine Maintenance: Because high-efficiency LED indicators operate at ≤ 20 mA, microampere leakage currents from PLC triac outputs, solid-state relays, or capacitive coupling in long parallel AC cables can cause the lamp to glow faintly even when switched off. Installing a parallel bleeder resistor (snubber) across the 2-pin terminals shunts stray leakage current and prevents phantom illumination. For routine care, inspect hex-nut tightness periodically and wipe the PA66 diamond lens with a dry or slightly damp soft cloth while de-energized.

How to Choose a Plastic Indicator Light & B2B RFQ Checklist

1. How to Choose & Key Buying Considerations

Begin by confirming four core engineering parameters: panel cutout diameter, exact circuit voltage (AC or DC), enclosure ingress rating, and termination style. Choosing a 16mm hex-nut model like the FL1P-16BJ-1 provides strong mechanical retention across varying panel thicknesses while delivering elevated faceted visibility.

2. Panel Cutout Sizing Guide

Metric Cutout Approx. Inch Equivalent Typical Panel Application
6mm / 8mm / 10mm Ø0.236 / Ø0.315 / Ø0.394 in Compact electronics, tight sub-panels, and handheld instrumentation
12mm Ø0.472 in Small appliances, automotive dashboards, and compact control boxes
16mm (FL1P-16BJ-1) Ø0.630 in High-end machinery, distribution cabinets, new energy gear, and appliances
22mm Ø0.866 in Heavy industrial switchgear and long-distance operator stations

3. Certification Guide

For model FL1P-16BJ-1, stated product compliance markings include CE, VDE, RoHS, ISO9001, and CCC. When sourcing for international projects, B2B buyers should state required regional certificates (such as UL, TÜV, VDE, CE, or CCC) in their RFQ so FILN engineering can verify exact certificate coverage for the ordered voltage and termination configuration.

4. Material Selection Guide (PA66 Plastic vs. Alternative Metal Housings)

Model FL1P-16BJ-1 uses Nylon PA66 for its shell, base, and diamond lens to deliver dielectric insulation, low weight, heat endurance up to +80°C, and economical B2B unit cost. If your application requires a metallic housing instead, compare the alternative metal housing families below:

Housing Material Family Key Advantages Limitations Best Environments
Nylon PA66 (This Product: FL1P-16BJ-1) Full electrical insulation, lightweight, faceted diamond lens clarity, cost-efficient, good heat resistance Lower impact resistance than machined metal; IP50 rating on this SKU High-end equipment panels, indoor distribution cabinets, appliances, lab gear
Nickel-Plated Brass (Other Metal Series) High mechanical rigidity, bright metallic finish, durable precision threads Electrically conductive body; plating can wear in severe marine salt spray General factory machinery, indoor/sheltered industrial control panels
Stainless Steel (Other Metal Series) Superior corrosion resistance, high vandal/impact durability, hygienic bezel Higher unit cost and heavier mass Marine decks, outdoor kiosks, chemical & washdown equipment (with IP65/IP67)
Zinc-Aluminum Alloy (Other Metal Series) Economical die-cast metallic appearance with moderate mechanical strength Lower corrosion resistance than stainless steel; conductive housing Cost-sensitive indoor equipment requiring a metallic bezel aesthetic

5. Specification-to-Decision Framework

Specification What It Means & Why It Matters When to Choose a Different Value What to Confirm Before Ordering
Cutout: 16mm Determines panel hole punching and diamond head visual presence Choose 6–12mm for compact sub-panels, or 22mm for heavy switchgear Exact panel hole diameter and panel thickness range
Voltage: 3–480V Custom Internal resistor is sized to nominal supply voltage to prevent burnout or dim output Specify exact bus voltage (e.g., 24V DC vs. 220V AC or 380V AC) Nominal voltage, tolerance, and AC vs. DC supply type
IP Rating: IP50 Protects against dust ingress inside indoor cabinets and consoles Upgrade to IP65/IP67 sealed models if exposed to water spray, rain, or washdown Presence of moisture, oil mist, or outdoor exposure
Wiring: 2-Pin Terminals Supports quick-disconnect female spades or direct soldering Request factory pre-wired leads if your assembly line avoids pin crimping 2-pin terminal vs. custom pre-wired lead length and connector

6. B2B Procurement RFQ Checklist

When submitting a Request for Quotation (RFQ) to FILN, please include the following 21 specifications:

  • Product type (Diamond Head LED Indicator Lamp)
  • Model reference (FL1P-16BJ-1 or custom)
  • Mounting hole size (16mm or other)
  • Operating voltage (e.g., 12V, 24V, 110V, 220V, 380V, 480V)
  • Current type (AC, DC, or AC/DC)
  • LED color (Red, Green, Yellow, Blue, White)
  • Head type (Diamond-faceted high head)
  • Housing material (Nylon PA66)
  • Waterproof / IP rating requirement (IP50 or higher)
  • Wiring method (2-pin terminals or custom pre-wired leads)
  • Wire length (if ordering custom pre-wired variant)
  • Connector requirement (bare pins, spade receptacles, or plug)
  • Certification requirement (CE, VDE, RoHS, CCC, UL, etc.)
  • Order quantity (sample, pilot batch, or wholesale volume)
  • Packaging requirement (bulk polybag, tray, or individual box)
  • OEM / ODM customization requirement
  • Logo printing or laser engraving requirement
  • Custom symbol / voltage marking on body
  • Target destination market / country
  • Application environment & panel thickness
  • Expected delivery date

Providing these specifications helps FILN engineering and sales teams confirm product compatibility and quotation requirements more efficiently.

Send B2B RFQ / Inquiry Order Online Now
Request Technical Datasheet Request 3D Modeling / CAD

FILN Manufacturing and Engineering Capabilities

Sourcing directly from an established indicator lamp manufacturer simplifies technical verification, shortens engineering feedback loops, and keeps batch quality consistent from pilot samples to mass production:

  • Dedicated R&D & Engineering Support: Direct collaboration with electrical and mechanical engineers helps buyers match resistor values for custom voltages (3V–480V), verify panel thickness fit, and obtain 2D dimension drawings or 3D CAD models.
  • OEM & ODM Customization: FILN produces custom pre-wired versions of the 2-pin FL1P-16BJ-1, custom wire harness connectors, custom body voltage markings, and private-label packaging.
  • In-House Molding & Automated Assembly: Precision injection molding of faceted PA66 diamond lenses, internal resistor-LED soldering, and automated assembly maintain consistent optical sparkle and thread accuracy.
  • Testing & ISO9001 Quality Control: Production batches undergo electrical illumination verification, dielectric voltage-proof testing, and environmental endurance sampling in FILN’s independent laboratory under ISO9001 quality management.
  • Certification Support & Flexible Batch Supply: Engineering teams assist B2B procurement staff in confirming regional compliance documentation (CE, VDE, RoHS, CCC, or UL where applicable to the specific configuration) while supporting samples, small trial batches, and global wholesale orders.

FILN manufacturing facility, R&D engineering, and testing laboratories

Factory Direct Supply

Yueqing Yulin Electronic Co., Ltd, operating under the brand name FILN in Wenzhou, Zhejiang, was established in 2006 as an electrical-switch and indicator manufacturer integrating R&D, production, and global sales. FILN-brand indicator lights, push-button switches, rocker switches, toggle switches, and custom small electrical components are exported to over 100 countries across North America, Europe, Asia, and Australia.

FILN operates a 10,000 m² manufacturing facility equipped with more than 20 production lines and an independent testing laboratory governed by an ISO9001 quality management system. Across its broader switch and indicator product lines, FILN maintains company-level certification capabilities including ISO9001, CE, VDE, RoHS, SGS, UL, TÜV, and IP65-rated series (note that specific certificate applicability depends on the individual SKU; for model FL1P-16BJ-1, stated product markings are CE, VDE, RoHS, ISO9001, and CCC with IP50 protection).

Whether your procurement team requires immediate online ordering or custom OEM engineering for high-end machinery, distribution cabinets, or new energy systems, connect directly with the factory via our official website at www.filn.com, order online at cnfiln.com, or email our engineering sales team at inquiry@cnylin.com.cn.

View Complete Plastic Indicator Light Product Catalog (Opens in New Window)
Open All Plastic Indicator Lights

FILN electronic components and Diamond Head LED Indicator Lamp production workshop

Frequently Asked Questions

What is a Diamond Head LED Indicator Lamp?

A Diamond Head LED Indicator Lamp such as the FILN FL1P-16BJ-1 is a 16mm panel-mount plastic pilot light featuring a protruding multi-faceted diamond lens, Nylon PA66 insulated housing, 5mm non-polarity LED, and 2-pin terminals. Manufactured by Yueqing Yulin Electronic Co., Ltd (FILN), its faceted head refracts LED light for heightened visual brilliance on equipment panels.

What panel cutout size is required for model FL1P-16BJ-1?

Model FL1P-16BJ-1 requires a standard 16mm (Ø0.630 in) circular panel mounting hole. Insert the threaded barrel through the 16mm opening from the front of the panel and tighten the supplied hex mounting nut clockwise from behind to secure the indicator firmly in place.

What voltage options are supported for this Diamond Head LED Indicator Lamp?

FILN manufactures this 16mm Diamond Head LED Indicator Lamp across a customizable voltage range from 3V to 480V AC/DC, including standard ratings such as 3V, 6V, 12V, 24V, 48V, 110V, 220V, 380V, and 480V. Because each unit uses a precision internal resistor matched to its rated voltage, confirm your exact circuit voltage when ordering.

Can I purchase this 16mm Diamond Head LED Indicator Lamp directly online?

Yes. Equipment builders, maintenance engineers, and buyers can purchase this product directly online at cnfiln.com, or contact the FILN factory team via www.filn.com for wholesale B2B pricing and OEM customization.

Why choose a diamond-faceted high head over a standard flat indicator lens?

The protruding diamond-cut facets refract internal LED emission across multiple angles, creating a brighter, jewel-like sparkle that stands out on high-end machinery, audio/control consoles, and modern appliances compared with flat lenses—especially when viewed from oblique operator angles.

How is the FL1P-16BJ-1 mounted to a control panel?

This model uses hex-nut fixation. Drill a 16mm round cutout, pass the 2-pin terminal end through the hole from the front of the panel until the diamond head sits flush, and thread the included hex nut onto the rear PA66 barrel until snug without over-torquing.

Is the FL1P-16BJ-1 Diamond Head LED Indicator Lamp waterproof?

This model is rated at IP50 ingress protection, which protects against dust accumulation inside indoor cabinets and enclosed equipment panels. It is not rated for pressurized water washdown or outdoor rain exposure; if you need IP65 or IP67 waterproofing, contact FILN for sealed panel indicator series.

Can FILN produce a pre-wired version instead of 2-pin terminals?

Yes. While the standard FL1P-16BJ-1 features 2-pin terminals for female quick-disconnect spades or direct soldering, FILN can manufacture pre-wired versions with custom lead lengths and pre-crimped connectors for OEM production lines. Send your harness specification to inquiry@cnylin.com.cn.

How do 2-pin terminal indicator lights compare to pre-wired indicator lights?

2-pin terminal indicators offer a compact rear footprint and connect rapidly to standardized female spade harnesses or custom-cut wires on site. Pre-wired indicator lights save pin-crimping labor on high-volume assembly lines and leave no exposed bare metal terminals behind crowded control panels.

What does the built-in 5mm non-polarity LED mean during wiring?

Because the internal 5mm LED is non-polar, current illuminates the lamp regardless of which pin is connected to positive or negative on DC circuits (within the ordered voltage rating). This eliminates polarity reversal troubleshooting on 12V and 24V equipment assembly lines.

How do I prevent phantom illumination or faint glowing on low-voltage LED indicators?

Faint glowing when the switch is off happens because high-efficiency LEDs draw ≤ 20 mA and can illuminate slightly from tiny leakage currents in PLC outputs, solid-state relays, or induced capacitance in long parallel AC cables. Connecting a parallel bleeder resistor across the 2-pin terminals drains stray leakage current and eliminates phantom glow.

What LED colors are available for this Diamond Head LED Indicator Lamp?

Model FL1P-16BJ-1 is available in five standard LED colors: Red (620–625 nm), Green (520–525 nm), Yellow (588–592 nm), Blue (460–465 nm), and White. You can order directly on cnfiln.com or request mixed-color packs from FILN.

What is the operating temperature range of this plastic indicator lamp?

The FILN FL1P-16BJ-1 is rated for continuous operating and storage temperatures from −15°C to +80°C at relative humidity up to 85% RH (+40°C). It is verified under 96-hour endurance testing at both +80°C and −15°C as well as 5-cycle thermal shock testing.

What certifications apply to the FILN FL1P-16BJ-1 indicator lamp?

Stated product compliance markings for this offering are CE, VDE, RoHS, ISO9001, and CCC. Because certification coverage can vary by voltage rating and regional market rules, B2B buyers should request the relevant certificate documents for their exact configuration prior to mass production.

What material is used for the shell, base, and diamond lens?

The shell, lamp base, and diamond-faceted high head lens are molded from Nylon PA66. PA66 provides strong dielectric insulation (≥ 100 MΩ at 500 V DC), thermal stability up to +80°C, lightweight handling, and reliable thread strength for hex-nut panel mounting.

When should I choose a plastic Diamond Head LED Indicator Lamp over a metal indicator?

Choose a plastic Diamond Head LED Indicator Lamp when you want electrical isolation on conductive panels, lighter weight, faceted lens brilliance, and lower B2B unit cost for indoor cabinets or appliances. Choose a metal indicator light when panels face heavy mechanical impact, vandal risk, or harsh outdoor conditions.

What is the rated service life and power draw of model FL1P-16BJ-1?

The FL1P-16BJ-1 has a rated operating life of 60,000 hours under specified test conditions, drawing ≤ 20 mA current and approximately 0.2 W of power. Note that 60,000 hours is a rated engineering service life benchmark rather than a commercial warranty period.

Does FILN supply PDF datasheets and 3D CAD models for engineering design?

Yes. Mechanical and electrical engineers can request detailed PDF datasheets and 3D STEP/CAD models for panel layout verification by emailing inquiry@cnylin.com.cn or visiting the manufacturer website at www.filn.com.

What other sizes does FILN manufacture in plastic and metal indicator lights?

Alongside this 16mm model, FILN manufactures plastic indicator lights in 6mm, 8mm, 10mm, 12mm, 14mm, and 22mm cutouts, as well as metal LED indicator lights in 16mm and other diameters. Explore the full plastic range on indicatorlight.com.

Can I order evaluation samples before placing a bulk B2B order?

Yes. FILN supports sample evaluation and small trial orders prior to mass production so engineering and procurement teams can verify diamond lens brightness, hex-nut fit, and thermal performance. Order single pieces at cnfiln.com or request custom samples from www.filn.com.

Inquiry Now