Product Category

Search

Control Panel Lights Plastic 12.5mm PA66 LED Indicator Light | FILN

Product Specifications
• Model: FL1P-12.5QW-1
• Color: Red, green, yellow, blue, and white
• Shape: Circular flat head
• Material: Heat-resistant Nylon PA66 housing
• Finish Type: Plastic finish
• Light Source Type: LED
• Rated Voltage: Customizable from 3V to 480V
• Rated Current: Customizable
• Mounting Type: Snap-in panel mounting
• Terminal / Wiring: 2-pin pre-wired 15cm leads
• Protection Rating: IP50, CE, VDE, RoHS, ISO9001 Certified
• Product Size: 12.5 mm (0.49 inch)
• Other Key Specifications: Engineered by FILN for industrial equipment manufacturers and panel builders
• Download PDF: 12.5mm 110v dash board plastic pilot indicator light-FL1P-12.5QW-1
• Email: inquiry@cnylin.com.cn

About this item
• Main Advantage: The FL1P-12.5QW-1 compact snap-in LED signal indicator delivers reliable visual operational-status feedback for industrial equipment and enclosed control panels.
• Durability & Reliability: Built with a heat-resistant Nylon PA66 housing providing IP50 protection, backed by strict CE, VDE, RoHS, and ISO9001 factory certifications.
• Installation & Compatibility: Engineered for quick snap-in installation in a 12.5 mm (0.49 inch) panel cutout with convenient 2-pin pre-wired 15cm wire leads.
• Applications: Widely utilized in distribution cabinets, coffee machines, floor scrubbers, laboratory instruments, and new energy system control panels.
• OEM & ODM: Factory support includes custom wire lengths, tailored voltage configurations from 3V to 480V, 3D CAD models, and engineering samples.

FL1P-13QW-1

Product Summary

FILN 12.5mm plastic control panel lights (model FL1P-12.5QW-1) are compact, snap-in LED signal indicators engineered for industrial equipment manufacturers, panel builders, and B2B procurement teams. Built with a heat-resistant Nylon PA66 housing, a circular flat head, and 2-pin pre-wired 15cm leads, these control panel lights support customizable voltages from 3V to 480V across Red, Green, Yellow, Blue, and White LEDs. Rated at IP50 for indoor and enclosed control panels, they are widely used in distribution cabinets, coffee machines, floor scrubbers, laboratory instruments, and new energy systems. Buyers can purchase standard units directly online or contact our factory engineering team for custom wire lengths, voltage configurations, samples, datasheets, and 3D CAD models.

Key Takeaways

  • Standard 12.5mm Mounting Cutout: Designed for a 12.5mm (0.492 in) round panel cutout with integrated snap-in retention tabs for tool-free mechanical mounting.
  • Wide Customizable Voltage Range: Supports 3V to 480V AC/DC configurations (including 3V, 6V, 12V, 24V, 48V, 110V, 220V, 380V, and 480V) tailored to your circuit design.
  • Pre-Wired 2-Pin Convenience: Equipped with 2-pin 15cm wire leads (customizable wire lengths available) to speed up harness integration and eliminate loose terminal clips.
  • Lightweight PA66 Construction: Nylon PA66 enclosure, base, and lens deliver electrical insulation, high-temperature resistance (-15°C to +80°C), and lower unit cost than metal housings.
  • Five LED Color Options: Available in Red, Green, Yellow, Blue, and White with a circular flat bezel for clean, flush-style visual status indication on operator panels.
  • IP50 Enclosure Rating: Suitable for dust-protected indoor control panels, commercial appliances, and electrical cabinets; not intended for outdoor washdown or immersion.
  • Stated Compliance Marks: Product offerings carry CE, VDE, RoHS, ISO9001, and CCC marks as specified; procurement teams can request specific certificates for target markets.
  • Direct Factory Sourcing & Fast Ordering: Available for immediate direct online purchase or bulk OEM/ODM factory quotation with 3D drawings and engineering support.

What Is a Plastic Control Panel Light?

A plastic indicator light is a panel-mounted visual signaling component housed in an insulated thermoplastic body that illuminates via an internal LED to communicate equipment power, operating state, or fault conditions. Across industrial electrical components, indicator lights are divided into two primary material categories: metal indicator lights (typically nickel-plated brass or stainless steel) and plastic indicator lights. While metal versions are selected for heavy mechanical impact and feature flat, convex, or concave bezels, plastic control panel lights prioritize lightweight assembly, electrical insulation, cost efficiency, and flexible sizing across 6mm, 8mm, 10mm, 12mm, 12.5mm, 16mm, and 22mm cutouts.

Structurally, a plastic LED pilot light combines a molded polymer bezel and lens, an internal 5mm non-polarity LED emitter, a current-limiting resistor matched to the rated voltage, and external electrical terminations. Depending on series configuration, plastic indicators are manufactured with three wiring architectures: pin-type terminals, pre-wired wire leads, or screw terminals. When voltage is applied across the leads, the internal resistor regulates current to ≤ 20 mA, illuminating the lens in Red, Green, Yellow, Blue, or White. This simple, solid-state operation makes plastic control panel lights essential across commercial appliances like coffee machines and floor scrubbers, as well as power distribution cabinets, laboratory analyzers, and automation consoles.

FILN 12.5mm plastic control panel lights with 2-pin wire leads and circular flat head

Buy This Indicator Online Send Factory Inquiry / Sample
Request Specification Sheet Request 3D CAD Model

Explore Our Full Range of Plastic Control Panel Lights & 12.5mm Models

Need alternative mounting diameters, head styles, or terminal types? Browse our complete catalog of factory-direct plastic panel indicators or view all 12.5mm configurations.

View All Plastic Indicator Lights More 12.5mm Plastic Indicator Lights

Product Overview: Model FL1P-12.5QW-1

The FILN FL1P-12.5QW-1 is a 2-pin pre-wired plastic indicator light tailored for high-efficiency panel assembly and OEM equipment production. Once inserted into a 12.5mm panel opening, the indicator sits flush with a clean circular flat head on the operator side, while molded side locking ears snap firmly against the rear panel wall—eliminating the need for separate hex nuts, lock washers, or O-rings. Inside the Nylon PA66 body, a 5mm non-polarity LED paired with a carbon film current-limiting resistor provides stable illumination across custom voltages ranging from 3V up to 480V.

For procurement teams and electrical engineers, this configuration balances thermal durability, low unit weight, and rapid installation. The standard 15cm PVC wire leads simplify direct integration into wiring harnesses or terminal blocks, and custom lead lengths can be specified during factory ordering. Standard units can be purchased directly from our online store, while projects requiring custom voltage ratings, bulk packaging, or metal alternatives—such as our metal LED indicator lights or 12mm metal LED indicator lights—are supported directly by our engineering department.

Quick Specifications

Parameter Specification
Product Model FL1P-12.5QW-1
Product Type 2-Pin Pre-Wired Plastic Control Panel Light
Mounting Hole Size 12.5 mm (approx. Ø0.492 in)
Operating Voltage 3V – 480V AC/DC (customizable per order: e.g., 3V, 6V, 12V, 24V, 48V, 110V, 220V, 380V, 480V)
Wiring Method 2-Pin with pre-wired leads, standard length 15 cm (customizable length available)
Head Shape Circular flat head
Mounting Method Snap-in installation with integrated side locking tabs
LED Colors Red (R), Green (G), Yellow (Y), Blue (B), White (W)
Package Contents 1 × Plastic Indicator Light (no separate nut, O-ring, or lock washer required)
Stated Product Marks CE, VDE, RoHS, ISO9001, CCC (confirm specific certificate documentation per target market)
Surface & Assembly Quality Smooth finish free of burrs, oxidation, or cracks; head and base securely seated without rotation or tilt

Performance Parameters

Electrical & Mechanical Metric Rated Value & Test Condition
Rated Operating Voltage 3V to 480V DC/AC (built to specified voltage configuration)
AC Frequency 50 / 60 Hz
Rated Operating Current ≤ 20 mA
Rated Power Consumption Approx. 0.2 W
Insulation Resistance ≥ 100 MΩ (measured at 500 V DC applied between lead wires and housing)
Dielectric Strength 1500 V AC with no breakdown or flashover
Rated Operating Life 60,000 hours (rated operational life under standard test conditions, not a warranty period)
Ingress Protection Rating IP50 (dust-protected for indoor and enclosed panel use)

Component Materials

Component Material Specification Engineering Purpose
Enclosure / Bezel Nylon PA66 Provides high electrical insulation, thermal stability up to +80°C, and low structural weight
Base / Snap Tabs Nylon PA66 Delivers mechanical elasticity for secure snap-in panel retention without metal hardware
Lens Nylon PA66 Diffuses LED light evenly across the circular flat face while resisting heat
Light Source 5mm Non-Polarity LED Low power draw and simplified DC/AC installation without positive/negative lead polarity concerns
Internal Resistor Carbon Film Resistor Regulates forward LED current to ≤ 20 mA across the specified 3V–480V input voltage
Lead Wires PVC Insulated AWG22 (15 cm standard) Flexible insulated wiring ready for control cabinet harnesses; custom lengths available
Nut / O-Ring / Lock Washer Not applicable Snap-in housing design locks directly into the 12.5mm cutout

Environmental Performance

Environmental Parameter Rating / Test Condition
Operating & Storage Temperature -15°C to +80°C
Operating Relative Humidity ≤ 85% RH at +40°C
High-Temperature Endurance Test 96 hours at 80 ± 2°C
Low-Temperature Endurance Test 96 hours at -15 ± 2°C
Constant Damp Heat Test 96 hours at 40 ± 2°C, 90% to 95% RH
Temperature Cycling Test 5 cycles of -15°C (30 min) and +80°C (30 min)

LED Specification

LED Absolute Maximum Ratings

Parameter Symbol Maximum Rating
Peak Forward Current IFP 20 mA
Reverse Voltage (LED Chip) VR 5 V
Power Dissipation PD 60 mW
LED Operating Temperature TOPR -15°C to +80°C
LED Storage Temperature TSTG -15°C to +100°C
Lead-Free Soldering Temperature TSOL Max 260°C for ≤ 3 seconds

Electro-Optical Characteristics (Ta = 25°C, IF = 20 mA)

LED Color Forward Voltage VF Dominant Wavelength λd Luminous Intensity Iv Viewing Angle 2θ½
Red (R) 1.8 – 2.2 V 620 – 625 nm 1000 – 1500 mcd 60° (typical)
Green (G) 3.0 – 3.2 V 520 – 525 nm 8000 – 10000 mcd 35° (typical)
Yellow (Y) 2.0 – 2.2 V 588 – 592 nm 1000 – 1500 mcd 35° (typical)
Blue (B) 3.0 – 3.2 V 460 – 465 nm 2000 – 3000 mcd 35° (typical)
White (W) Not specified in the available product data Not specified in the available product data Not specified in the available product data Not specified in the available product data

Reverse current IR at VR = 5 V is ≤ 3 µA. Recommended LED forward current IF is 20 mA typical.

Standard Test Conditions

Test Condition Item Standard Reference Range
Ambient Temperature 5°C to 35°C (unless otherwise specified)
Relative Humidity 45% to 85% RH
Atmospheric Pressure 86 kPa to 106 kPa (860 mbar to 1060 mbar)
Optical Calibration Luminous intensity and dominant wavelength calibrated to the CIE eye-response curve
Measurement Tolerances Luminous intensity ±15%; Voltage ±0.1 V

Applications by Industry

Because the FL1P-12.5QW-1 combines a 12.5mm circular flat bezel, heat-resistant PA66 housing (-15°C to +80°C), and an IP50 rating, these control panel lights are well suited for indoor enclosures and protected operator interfaces across multiple industries. For environments requiring washdown sealing or heavy impact protection, consult FILN for sealed metal configurations.

  • Commercial & Household Appliances: Frequently installed on espresso and coffee machines, commercial floor scrubbers, steam cleaners, and kitchen equipment where compact 12.5mm cutouts, thermal endurance, and fast snap-in assembly are critical.
  • Power Distribution Cabinets & Large Electrical Equipment: Used on indoor switchgear doors, power distribution panels, transformer control boxes, and phase-status boards across customizable voltages up to 380V and 480V AC.
  • New Energy & Power Storage Systems: Integrated into indoor inverter status panels, battery management cabinets, and charging control modules to signal standby, charging, or fault states.
  • Laboratory & Testing Instruments: Ideal for benchtop analyzers, environmental test chambers, and diagnostic equipment requiring electrically insulated PA66 housings and clear, low-glare flat lenses.
  • Automotive Modification & Yacht Interior Panels: Applied on 12V and 24V interior dashboards, auxiliary switch consoles, and enclosed marine cabin breaker panels protected from direct water spray.

Industrial and appliance applications for 12.5mm plastic control panel lights

LED Indicator Color Meanings and Application Guide

Standardized color coding helps operators interpret equipment status rapidly and reduces human error on complex control panels. However, color conventions vary by machinery manufacturer, industry standard, national electrical code, and specific system logic—always verify your project’s electrical schematic before finalizing LED colors.

LED Color Common Industrial Meaning Typical Equipment Status Typical Control Panel Application Selection Notes
Red (R) Danger, Emergency, Fault, Stop Overload trip, high temperature, emergency stop active, or main power live (in power distribution) Alarm annunciators, phase-live indicators, boiler overheat alerts Wide 60° viewing angle ensures high peripheral visibility across operator stations
Green (G) Safe, Normal Operation, Ready Motor running, system ready, cycle complete, normal pressure/temperature Coffee machine ready-to-brew lamps, pump active indicators, PLC run status High luminous intensity (8000–10000 mcd) remains crisp in brightly lit kitchens and plants
Yellow (Y) Caution, Abnormal Condition, Standby Pre-heating in progress, low water/material level, maintenance due Heating element active lamps, floor scrubber battery warning, standby mode Often used to alert operators before a condition escalates to a red fault
Blue (B) Mandatory Action, Reset Required, Auxiliary Function Operator reset needed, remote control mode active, auxiliary circuit energized Automotive auxiliary switches, laboratory instrument mode indicators, reset prompts Distinctive wavelength (460–465 nm) avoids confusion with standard status colors
White (W) Neutral Status, General Power On Control circuit energized, neutral status confirmation Distribution cabinet incoming power confirmation, appliance main power lamps Used where Red or Green carries conflicting functional meaning on the same panel

How to Install a 12.5mm Snap-In Plastic Indicator Light

Model FL1P-12.5QW-1 utilizes a snap-in mounting architecture that installs from the front of the panel, leaving a neat circular flat plastic bezel flush against the surface. Follow these steps for reliable mechanical and electrical installation:

  1. Prepare Required Tools: Gather a 12.5mm panel punch or drill bit, deburring tool, wire strippers, and insulated crimp connectors or heat-shrink tubing.
  2. Verify Power Isolation: Disconnect and lock out all electrical power to the equipment or distribution cabinet before machining or wiring.
  3. Cut the 12.5mm Mounting Hole: Drill or punch a clean 12.5mm circular opening at the designated panel location, then remove sharp metal or plastic burrs so the snap tabs seat evenly.
  4. Check Product Orientation: Feed the two 15cm wire leads through the front of the 12.5mm opening into the enclosure interior, aligning the circular flat head squarely with the panel face.
  5. Snap the Indicator Into Place: Press the indicator firmly straight into the cutout from the front of the panel until the integrated side locking ears expand behind the panel wall and lock the housing securely.
  6. Prepare Lead Ends: Confirm the stripped tips of the 15cm AWG22 leads are clean and undamaged.
  7. Complete Electrical Connection: Connect the two leads to the matching voltage circuit (3V–480V as ordered) using insulated terminal blocks, crimp splices, or soldering with heat-shrink sleeves.
  8. Verify Panel Fit & IP50 Environment: Confirm the bezel sits flat without wobbling. Remember that IP50 protects against dust in enclosed panels and is not sealed for outdoor rain or pressurized washdown.
  9. Perform Post-Installation Inspection: Energize the circuit and verify crisp, steady illumination without flicker or loose wire strain.
  10. Avoid Common Installation Mistakes: Do not oversize the cutout beyond 12.5mm (which loosens snap retention), do not apply excessive lateral torque to the plastic bezel, and never connect a low-voltage unit directly to mains voltage.

Step-by-step snap-in installation of FILN 12.5mm plastic control panel lights

Wiring Guide: Pin-Type vs. Pre-Wired Lead Control Panel Lights

Always disconnect power before wiring any panel indicator. Because model FL1P-12.5QW-1 incorporates an internal 5mm non-polarity LED and current-limiting resistor matched to your ordered voltage (3V–480V), DC circuits do not require observing positive/negative lead polarity on the indicator itself—though you must always verify that the supply voltage matches the indicator’s rated label.

For this 2-pin pre-wired version (15cm leads), terminate the leads using insulated quick-disconnect terminals, screw terminal strips, or soldered joints covered with heat-shrink tubing. For pin-type plastic indicator lights in our broader catalog, wires are attached via matching female spade receptacles (such as 2.8mm quick-connect sleeves) or direct low-temperature soldering (max 260°C for ≤ 3 seconds). The comparison below helps engineers and buyers select between pin-type and pre-wired designs:

Comparison Dimension Pre-Wired Lead Type (FL1P-12.5QW-1) Pin-Type Terminal Indicator
Key Advantages Ready to connect out of the box; factory-insulated wire joint resists vibration detachment; custom wire lengths (15cm standard) eliminate extra harness splicing Compact rear depth behind tight panels; allows fast swap-out using detachable female quick-connect terminals without cutting wires
Limitations Requires wire splicing or terminal block termination; fixed lead length unless custom-ordered Requires separate insulated female receptacles or careful soldering (≤ 3 s at 260°C) to avoid overheating the PA66 base
Best Application Scope Coffee machines, floor scrubbers, distribution cabinets, automotive/yacht harnesses, and vibrating machinery Modular control consoles, PCB-adjacent panels, and equipment requiring periodic field replacement via plug-in connectors

Industry Knowledge Center: Reliability & Troubleshooting

Why Internal Current Regulation Matters: Unlike legacy incandescent neon or filament bulbs that generate high heat and fail prematurely under vibration, LED control panel lights rely on solid-state emitters paired with calibrated resistors. Matching the internal resistor to the exact line voltage prevents thermal runaway and preserves the 60,000-hour rated operating life.

Troubleshooting Phantom Illumination (Faint Glowing): In AC control cabinets with long parallel cable runs, high-efficiency LED indicators can occasionally exhibit a faint glow even when the switch is open. This occurs due to capacitive coupling or small leakage currents from solid-state relays and PLC outputs. To eliminate phantom illumination, engineers can install a parallel bleeder resistor or RC snubber across the indicator leads, or specify a custom FILN voltage circuit tuned to suppress induced leakage current.

Compliance & Procurement Documentation: Industrial buyers exporting equipment to North America, Europe, or Asia routinely verify safety and environmental marks during incoming quality control. While this product offering carries CE, VDE, RoHS, ISO9001, and CCC marks as stated in our product data, procurement teams should always request exact certificate copies matching their specific voltage SKU and destination country prior to mass production.

B2B Buyer Decision Guide & RFQ Checklist

Selecting the right panel indicator involves balancing panel cutout size, housing material, wiring labor, and environmental protection. Use the reference tables below to compare plastic versus metal housings and prepare a complete Request for Quotation (RFQ).

Plastic (PA66) vs. Metal Indicator Lights Comparison

Housing Material Family Key Advantages Limitations Recommended Environment
Nylon PA66 Plastic (This Model: FL1P-12.5QW-1) Lightweight, inherent electrical insulation, high cost-effectiveness, fast snap-in mounting, high heat resistance (-15°C to +80°C) IP50 rating is not suited for outdoor washdown or heavy mechanical impact Coffee machines, floor scrubbers, indoor distribution cabinets, lab equipment, enclosed control panels
Nickel-Plated Brass / Stainless Steel (Other FILN Series) Superior mechanical impact resistance, rugged threaded nut mounting, available in sealed configurations Higher unit weight and cost; requires hex nut tightening during assembly Heavy industrial machinery, outdoor consoles, high-vibration marine decks, vandal-prone panels

Comparing metal housings for your project? Browse our recommended 12mm metal LED indicator lights or explore the full metal indicator light catalog.

B2B Procurement RFQ Checklist

Providing these specifications helps FILN engineering and sales teams confirm product compatibility and quotation requirements more efficiently:

  • Product & Model: Plastic indicator light, Model FL1P-12.5QW-1 (or custom variant)
  • Mounting Hole Size: 12.5mm (or specify 6mm / 8mm / 10mm / 12mm / 16mm / 22mm)
  • Rated Voltage & Current Type: Exact voltage between 3V and 480V, plus AC or DC
  • LED Color & Head Shape: Red, Green, Yellow, Blue, or White; circular flat head
  • Wiring & Connector Details: 2-pin pre-wired lead length (15cm standard or custom length) and any terminal connector requirement
  • Environmental & Certification Needs: Indoor IP50 confirmation and required certificates (CE, VDE, RoHS, ISO9001, CCC)
  • Order & OEM Details: Estimated order quantity, target market, application environment, custom logo/marking, packaging preference, and target delivery date
Submit RFQ to Factory Order Direct Online

FILN Manufacturing and Engineering Capabilities

As a dedicated indicator light manufacturer, FILN integrates in-house R&D, tooling, injection molding, automated LED assembly, and electrical testing to support OEM and ODM buyers from prototype through volume production:

  • Custom Voltage & Circuit Engineering: Our engineers configure internal resistor networks for any non-standard voltage between 3V and 480V AC/DC, including custom anti-interference circuits.
  • Custom Wire Harnesses & Connectors: Beyond the standard 15cm AWG22 wire leads, we cut, strip, tin, and terminate custom wire lengths with buyer-specified connectors to reduce your assembly line labor.
  • 3D CAD & Specification Support: Procurement and mechanical engineers can request 2D dimensional drawings, 3D CAD models, and full specification sheets to validate panel clearances before tooling release.
  • Flexible Sample, Small-Batch & Bulk Supply: Whether you need engineering validation samples, pilot-run batches, or recurring container shipments, our production lines scale to match your manufacturing schedule.

FILN indicator light R&D and manufacturing capabilities

Factory Direct Supply

Yueqing Yulin Electronic Co., Ltd, operating under the brand name FILN in Wenzhou, Zhejiang, was established in 2006 as an electrical-switch and indicator light manufacturer integrating R&D, production, and global sales. Today, FILN products are exported to over 100 countries across North America, Europe, and Asia. Our 10,000 m² manufacturing facility houses more than 20 production lines alongside an independent testing laboratory governed by an ISO9001 quality management system.

In addition to plastic and metal indicator lights, our factory manufactures push-button switches, rocker switches, toggle switches, and custom electro-mechanical components. Across our broader product lines, FILN maintains certification capabilities covering ISO9001, CE, VDE, RoHS, CCC, UL, TÜV, and SGS (with specific marks confirmed per product SKU and voltage configuration). Buyers can purchase standard 12.5mm plastic indicator lights directly, explore our corporate profile on the official FILN website, or email inquiry@cnylin.com.cn for direct factory engineering support.

FILN 10,000 square meter electronic components manufacturing workshop

Contact Factory Sales Team Request Datasheet & 3D Files

Frequently Asked Questions

What is the FILN FL1P-12.5QW-1 plastic indicator light?

The FL1P-12.5QW-1 is a 12.5mm snap-in plastic LED control panel light featuring a circular flat head, a heat-resistant Nylon PA66 housing, and 2-pin 15cm pre-wired leads. Engineered by FILN (filn.com), it provides visual status signaling for distribution cabinets, appliances, and industrial equipment across customizable voltages from 3V to 480V.

Where can I buy this 12.5mm pre-wired plastic indicator light directly?

Standard configurations of this 12.5mm 2-pin wire-lead indicator light can be ordered directly online through our official store at cnfiln.com. For bulk OEM/ODM orders, custom voltages, or non-standard wire lengths, you can also send an inquiry directly to our factory team.

What panel cutout size is required for model FL1P-12.5QW-1?

This indicator light requires a circular panel cutout of 12.5mm (approximately 0.492 inches). Once pressed into the 12.5mm opening from the front, the integrated side locking ears snap securely behind the panel wall. You can browse additional 12.5mm plastic indicator lights on our product catalog.

What voltages are supported by these control panel lights?

FILN manufactures this series across a customizable voltage range from 3V to 480V AC/DC, including standard ratings such as 3V, 6V, 12V, 24V, 48V, 110V, 220V, 380V, and 480V. Because each unit contains a dedicated internal resistor matched to its rated voltage, confirm your required voltage when ordering on cnfiln.com.

Can I customize the wire length on the 2-pin pre-wired leads?

Yes. The standard lead length is 15cm using insulated AWG22 wire, which is ready for immediate panel integration. For OEM production runs, FILN can customize lead lengths, strip dimensions, and terminal connectors to fit your exact wiring harness—visit filn.com or email our engineers to specify your harness drawing.

What LED colors are available for this 12.5mm indicator?

Model FL1P-12.5QW-1 is available in five standard LED colors: Red (R), Green (G), Yellow (Y), Blue (B), and White (W). Each color uses a 5mm non-polarity LED paired with a matching circular flat lens. You can select your preferred color when purchasing directly on cnfiln.com.

How does snap-in installation work without nuts or washers?

The Nylon PA66 housing features molded elastic locking tabs along its barrel. After drilling a 12.5mm hole, you feed the 15cm wire leads through the front and press the bezel flush against the panel until the tabs snap open behind the panel wall. No separate hex nuts, lock washers, or O-rings are needed, reducing assembly time on production lines.

Is this plastic indicator light waterproof for outdoor washdown?

No. This series is rated at IP50, which provides dust protection suitable for indoor control cabinets, coffee machines, floor scrubbers, and enclosed operator panels. It is not rated for pressurized water spray, rain, or immersion. If your application requires a sealed metal housing, contact our team via filn.com for IP65/IP67 alternatives.

What is the operating temperature range of the PA66 housing?

The FL1P-12.5QW-1 operates reliably across a temperature range of -15°C to +80°C and relative humidity up to 85% RH at +40°C. Its Nylon PA66 body resists heat buildup inside electrical cabinets and commercial appliances such as espresso machines, verified through 96-hour high-temperature testing at 80 ± 2°C.

What does the 5mm non-polarity LED mean during wiring?

A non-polarity LED allows the indicator to illuminate regardless of which lead wire is connected to positive or negative on DC circuits, as well as on 50/60 Hz AC circuits. This simplifies technician wiring, reduces installation errors, and speeds up harness assembly while maintaining a low current draw of ≤ 20 mA.

How do I prevent phantom illumination or faint glowing when the circuit is off?

Faint glowing on low-current LED indicators typically results from induced AC voltage in long parallel cables or small leakage currents from solid-state relays and PLC outputs. Installing a parallel bleeder resistor or RC snubber across the indicator leads dissipates the leakage current, or you can request a custom anti-interference circuit from FILN via filn.com.

What is the expected service life of this LED panel indicator?

This indicator light has a rated operating life of 60,000 hours under standard test conditions (ambient 5°C to 35°C, ≤ 20 mA forward current). This figure represents the LED’s rated operational lifespan rather than a commercial warranty period, offering substantially longer service life than traditional incandescent pilot lamps.

What certifications are associated with this product offering?

Stated product marks for this offering include CE, VDE, RoHS, ISO9001, and CCC. Because certification scope can depend on the specific voltage rating and destination market, B2B procurement teams should request exact certificate documentation from FILN (filn.com) prior to finalizing compliance audits.

Why choose plastic control panel lights instead of metal indicator lights?

Plastic PA66 control panel lights are lighter, electrically insulated, more cost-effective, and faster to install via snap-in tabs than threaded metal housings. They are ideal for appliances, laboratory devices, and indoor cabinets. When higher mechanical impact resistance or rugged metal aesthetics are required, explore our 12mm metal LED indicator lights.

What is the difference between pin-type and wire-lead plastic indicators?

Pre-wired indicators like the FL1P-12.5QW-1 include factory-attached 15cm insulated leads ready for direct splicing or terminal block connection, saving harness labor. Pin-type indicators feature bare metal pins on the rear base that accept detachable female spade connectors or direct soldering where rear panel depth is tight.

Can B2B engineers request 3D CAD models and specification sheets before ordering?

Yes. Mechanical and electrical engineers can request 2D dimensional drawings, 3D CAD files, and detailed technical datasheets directly from our engineering support team. Visit filn.com or email inquiry@cnylin.com.cn with model FL1P-12.5QW-1 to receive CAD files for panel layout verification.

Does FILN supply samples for incoming quality testing?

Yes, engineering samples are available so your quality and R&D teams can verify cutout fit, brightness, and voltage compatibility prior to bulk procurement. You can order small quantities immediately via cnfiln.com or request sample support from our factory sales team.

What other mounting hole sizes does FILN offer in plastic indicator lights?

Alongside the 12.5mm FL1P-12.5QW-1, FILN manufactures plastic indicator lights in 6mm, 8mm, 10mm, 12mm, 16mm, and 22mm panel mounting sizes with pin, wire-lead, and screw-terminal options. Explore the complete lineup across all diameters on our plastic panel indicator lights category page.

Can FILN provide OEM branding or custom lens markings?

Yes. As an OEM/ODM indicator light factory established in 2006, FILN supports custom bezel markings, symbol printing, tailored wire harnesses, and private-label packaging for equipment manufacturers. Contact our team through filn.com to review OEM customization options.

What details should I include when sending an RFQ to FILN?

To receive an accurate factory quotation, please specify the model (FL1P-12.5QW-1), 12.5mm cutout size, exact voltage (3V–480V AC/DC), LED color (R/G/Y/B/W), wire length (15cm standard or custom), required certifications, estimated quantity, and target destination market. You can submit your RFQ via filn.com or buy standard units directly at cnfiln.com.

Inquiry Now