24V Panel Mount LED Indicator Light Product Summary
This 16mm plastic panel indicator is designed for electrical control panels, distribution cabinets, industrial equipment, laboratory equipment, new energy systems, marine equipment and household appliances. The 24v panel mount led configuration is a practical choice when a compact visual status signal is required on a control panel. The product uses a round raised plastic head, a 16mm mounting format, two pin terminals and a nut-fixed mounting structure.
The specified voltage range is 3–480V with customized voltage configurations available. Red, Green, Yellow, Blue and White LED colors are available. The plastic construction provides a lightweight alternative to metal indicator lights and is suitable for applications where electrical insulation, reduced weight and cost-conscious panel assembly are important.
For procurement teams, the key items to confirm before ordering are mounting hole size, voltage, AC/DC requirement, LED color, terminal configuration, head style, quantity, certification requirements and application environment. FILN can support samples, engineering communication, OEM/ODM requirements and customized configurations.
Key Takeaways for 24V Panel Mount LED Selection
- The product uses a 16mm mounting format for panel installation.
- The 24v panel mount led configuration is suitable for low-voltage control circuits where the selected electrical configuration matches the system.
- The specified voltage range is 3–480V with customized voltage configurations available.
- The connection is a 2-pin terminal configuration.
- The head is a round raised plastic head designed for visible panel indication.
- The mounting structure uses a threaded body and supplied plastic nut.
- Available LED colors include Red, Green, Yellow, Blue and White.
- The plastic construction is lightweight and electrically insulating compared with many metal housing alternatives.
- The product is intended for equipment panels, control cabinets and other enclosed or suitable environments.
- The 16mm format can be evaluated alongside other plastic indicator head styles when panel appearance is important.
- FILN can communicate with purchasing and engineering teams regarding samples, customization and OEM/ODM requirements.
- Before purchasing a 24v panel mount led configuration, confirm the actual voltage, AC/DC type, mounting hole and terminal requirements.
What Is a Plastic Indicator Light?
A plastic indicator light is a compact visual signaling component installed on an equipment panel to show operating, power, alarm or control status. Plastic indicator lights are commonly selected as an alternative to metal indicator lights when lower weight, electrical insulation, flexible configurations and cost-conscious panel assembly are important.
Function and Structure
A typical plastic panel indicator consists of a visible head, LED light source, current-limiting electrical components, housing and connection structure. This product uses a round raised plastic head, a 16mm mounting format, a 2-pin connection and a supplied plastic nut for panel fixation.
Plastic and Metal Indicator Light Families
Plastic and metal indicator lights serve similar signaling purposes but can suit different engineering priorities. Plastic versions are often considered when weight, insulation, economical production and large-volume panel assembly are important. Metal versions can be considered when mechanical strength, appearance or a more robust housing construction is required.
Common Plastic Indicator Sizes
FILN plastic indicator light families include common mounting formats such as 6mm, 8mm, 10mm, 12mm, 16mm and 22mm. The 16mm format is particularly common for electrical control panels and equipment interfaces.
Connection Options
Plastic indicator light families can be configured with pin-type terminals, pre-wired leads or screw-terminal connections depending on the product design. This specific configuration uses 2-pin terminals. Buyers requiring a pre-wired version should confirm the required configuration with FILN.
Typical Applications
The product can be used as a panel signal indicator for electrical equipment, distribution cabinets, laboratory equipment, new energy equipment, marine equipment, appliances and industrial control systems when the environmental conditions are appropriate for the specified configuration.

| Request a Sample | Buy This Indicator |
| Request Datasheet PDF | Request 3D Model / CAD |
Open Full Plastic Indicator Light Category
Product Overview
The FL1P-16NJ-7 is a 16mm plastic panel indicator designed around a round raised head, 2-pin terminal connection and nut-fixed panel mounting. For buyers searching for a 24v panel mount led, the product provides a compact visual interface for control cabinets and equipment panels while supporting a broader specified voltage range of 3–480V with customized voltage configurations.
The LED indicator operates by converting electrical input into a visible status signal. The selected voltage configuration must match the equipment circuit. The product family uses LED technology with a current-limiting resistor, while the 5mm non-polarity LED configuration in the default series data simplifies DC connection orientation.
For procurement projects, the plastic construction can be useful where a lightweight housing, electrical insulation and economical large-volume assembly are desired. For applications requiring a different mechanical appearance or housing construction, FILN can also provide metal indicator light options for comparison.
Recommended for engineering review
Confirm the mounting hole, selected voltage, AC/DC requirement, LED color, terminal arrangement and environmental conditions before approving the component for production.
Quick Specifications
| Attribute | Specification |
|---|---|
| Product Type | Plastic panel indicator light |
| Model | FL1P-16NJ-7 |
| Mounting Size | 16 mm / approximately Ø0.630 in mounting format |
| Voltage | 3–480V; customized voltage available |
| Connection | 2-pin terminal |
| Head Type | Round raised plastic head |
| Mounting Method | Nut-fixed panel mounting |
| LED Colors | Red, Green, Yellow, Blue, White |
| Accessories | 1 × plastic indicator light; 1 × plastic nut |
| Surface | Smooth panel indicator surface |
| Application | Control panels, distribution cabinets, equipment, laboratory systems, new energy equipment, marine equipment and appliances |
| Certification / Marks Stated for This Offering | CE, VDE, RoHS, CCC; ISO9001 applies to the company quality management system |
Performance Parameters
| Parameter | Value |
|---|---|
| Rated Working Voltage | 3–480V; customized voltage configuration available |
| Rated Working Current | ≤ 20 mA |
| Rated Power | Approximately 0.2 W |
| Frequency | 50/60 Hz |
| Insulation Resistance | ≥ 100 MΩ when 500 V DC is applied between lead wires and housing |
| Dielectric Strength | 1500V AC, without breakdown or flashover |
| Rated Operating Life | 60,000 hours under specified conditions |
| Ingress Protection | IP50 |
| Product Compliance Statement | RoHS compliant; additional marks stated for this offering should be confirmed for the exact configuration and market |
For a 24v panel mount led application, the selected electrical configuration should be matched to the actual control circuit. The broader 3–480V specification means buyers should not assume every voltage is identical across every configuration.
Component Materials
| Component | Material / Configuration |
|---|---|
| Enclosure | Nylon PA66 |
| Base | Nylon PA66 |
| Lens | Nylon PA66 |
| Light Source | 5mm non-polarity LED |
| Resistor | Carbon film resistor |
| Series Wire Configuration | PVC AWG22, 185mm for the standard wire-lead configuration; this SKU uses 2-pin terminals |
PA66 is used in this product family for electrical insulation, lightweight construction, heat resistance and practical production economics. The material choice can be useful for 24v panel mount led applications where a plastic housing is preferred over a metal housing.
Environmental Performance
| Condition | Specification |
|---|---|
| Operating and Storage Temperature | −15°C to +80°C |
| Relative Humidity | ≤85% at +40°C |
| High Temperature Test | 96 hours at 80±2°C |
| Low Temperature Test | 96 hours at −15±2°C |
| Constant Temperature and Humidity | 96 hours at 40±2°C and 90%–95% RH |
| Temperature Cycling | −15°C for 30 min and 80°C for 30 min, 5 cycles |
| Ingress Protection | IP50 |
The IP50 rating means this configuration should be considered for suitable enclosed or indoor equipment environments rather than washdown or immersion applications. If a 24v panel mount led installation requires higher environmental protection, contact FILN to confirm another configuration.
LED Specification
| LED Parameter | Specification |
|---|---|
| Maximum Forward Current IFP | 20 mA |
| Reverse Voltage VR | 5 V |
| Power Dissipation PD | 60 mW |
| Operating Temperature | −15°C to +80°C |
| Storage Temperature | −15°C to +100°C |
| Soldering Temperature | Up to 260°C for up to 3 seconds |
| Red Forward Voltage | 1.8–2.2 V at IF = 20 mA |
| Yellow Forward Voltage | 2.0–2.2 V at IF = 20 mA |
| Green / Blue Forward Voltage | 3.0–3.2 V at IF = 20 mA |
| Reverse Current | Maximum 3 µA at VR = 5 V |
| White LED Data | Not specified in the available product data |
Photometric Data at Ta = 25°C
| Color | Luminous Intensity | Dominant Wavelength | Typical Viewing Angle |
|---|---|---|---|
| Red | 1000–1500 mcd | 620–625 nm | 60° |
| Green | 8000–10000 mcd | 520–525 nm | 35° |
| Yellow | 1000–1500 mcd | 588–592 nm | 35° |
| Blue | 2000–3000 mcd | 460–465 nm | 35° |
| White | Not specified | Not specified | Not specified |
Standard Test Conditions
| Test Item | Condition |
|---|---|
| Ambient Temperature | 5°C to 35°C unless otherwise specified |
| Relative Humidity | 45% to 85% |
| Atmospheric Pressure | 86–106 kPa / 860–1060 mbar |
| Photometric Calibration | CIE human visual response curve |
| Luminous Intensity Tolerance | ±15% |
| Voltage Tolerance | ±0.1 V |
Applications by Industry
A 24v panel mount led indicator is commonly considered for equipment where a visible electrical status signal is needed. This 16mm plastic configuration can be evaluated for industrial control panels, distribution cabinets, laboratory equipment, appliances, new energy equipment and marine control interfaces, provided the installation environment is compatible with the product specifications.
| Industry | Typical Use | Selection Note |
|---|---|---|
| Industrial Automation | Control cabinets, machine panels and equipment status indication | Confirm circuit voltage and environmental conditions |
| Electrical Distribution | Distribution cabinet control panels and signal indication | 16mm mounting format should match panel design |
| Laboratory Equipment | Operating and process status indication | Use only where IP50 and temperature conditions are suitable |
| New Energy Equipment | Power, system or operating status indication | Verify voltage and application-specific requirements |
| Marine Equipment | Enclosed control panels and equipment interfaces | Do not assume this configuration is suitable for washdown or immersion |
| Household Appliances | Power and operating status indication | Confirm electrical configuration before production |

Plastic versus metal selection is application-dependent. Plastic is often considered for weight, electrical insulation and economical panel assembly, while metal housings can be preferred where greater mechanical strength or a different mechanical finish is required.
LED Indicator Color Meanings and Application Guide
LED colors communicate equipment status visually, but color conventions can vary by manufacturer, control system, industry, country and application. The color should therefore be defined by the equipment specification rather than assumed to have one universal meaning.
| Color | Common Meaning | Typical Status | Selection Note |
|---|---|---|---|
| Red | Warning, stop or attention | Fault or critical status | Follow the equipment control specification |
| Green | Normal or active status | Operating or ready condition | Confirm the control-system convention |
| Yellow | Caution or intermediate status | Attention or transitional condition | Meaning depends on equipment design |
| Blue | Special status or information | System-specific indication | Define the intended function during procurement |
| White | General information | Equipment-specific indication | White LED photometric data is not specified in the available data |
How to Install a Plastic Indicator Light
This 16mm panel indicator uses nut-fixed mounting. The general installation process is to prepare the correct circular panel opening, insert the indicator from the front of the panel, rotate the supplied nut onto the threaded body and secure the indicator before completing the electrical connection.
- Required tools: Prepare the appropriate panel drilling equipment and a suitable tool for tightening the mounting nut.
- Mounting preparation: Confirm the panel thickness and mounting hole requirement against the actual product drawing.
- Mounting hole: Prepare the specified 16mm mounting opening. Do not use the nominal size as a substitute for the approved drawing.
- Product orientation: Position the round raised plastic head so that the visible indicator surface faces the operator.
- Insert the indicator: Insert the indicator from the front side of the panel through the prepared opening.
- Secure the nut: Rotate the supplied plastic nut onto the threaded section from the rear side and tighten it sufficiently to secure the indicator.
- Prepare wiring: Confirm the selected voltage and electrical configuration before connecting the 2-pin terminals.
- Electrical connection: Complete the connection according to the actual circuit design and product drawing.
- Panel inspection: Check that the head is aligned, secure and not tilted or loose.
- Common mistake: Do not select a mounting hole only from a product name. Confirm the actual mechanical drawing.
- Safety: Disconnect power before wiring and follow applicable electrical safety procedures.

For a 24v panel mount led installation, the mounting procedure is independent of the selected LED color, but the electrical connection must always match the ordered voltage and circuit type.
How to Wire a Plastic Indicator Light
This product uses a 2-pin terminal connection. Wiring should be completed only after confirming the ordered voltage, AC/DC requirement and terminal arrangement. Although the series can also include wire-lead configurations, this particular configuration is supplied with 2-pin terminals.
| Connection Type | Advantages | Typical Use | Procurement Note |
|---|---|---|---|
| 2-Pin Terminal | Compact connection and convenient integration into a prepared panel wiring system | Control cabinets, equipment panels and standardized wiring assemblies | This is the connection configuration of the current product |
| Pre-Wired | Reduces field wiring work and can simplify assembly | Appliances, equipment assembly and harness-based production | Confirm wire length, gauge and connector requirements |
For a 24v panel mount led circuit, the electrical supply should be isolated before installation. The 5mm non-polarity LED in the series can simplify DC orientation, but the complete indicator configuration must still be selected for the correct voltage and electrical conditions.
If the application requires a pre-wired version, wire length, connector type and terminal arrangement can be discussed with FILN before ordering.
Industry Knowledge Center
Why Panel-Mount LED Indicators Matter
A panel indicator gives operators a direct visual signal without requiring a separate display interface. In industrial control panels, a correctly specified LED indicator can communicate power, operating, alarm or process status in a compact panel position.
Choosing a 24V Panel Mount LED Configuration
A 24v panel mount led configuration should be selected according to the actual electrical circuit rather than the search phrase alone. Confirm whether the circuit is AC or DC, the nominal operating voltage, allowable tolerance, LED color and connection structure. The current product supports a broader 3–480V customized range, so the exact ordered configuration should be documented.
Phantom or Faint LED Illumination
Low-voltage LED indicators can sometimes appear faintly illuminated when very small leakage currents, induced voltage or connected electronic components allow a small current to pass through the circuit. If a 24v panel mount led remains faintly illuminated when it should be off, inspect the circuit for leakage paths, electronic switching components, parallel loads and induced voltage. Confirm the circuit design with a qualified electrical engineer before changing the indicator.
Common Procurement Errors
- Selecting the nominal mounting size without checking the mechanical drawing.
- Ordering 24V indicators without confirming AC/DC requirements.
- Selecting an LED color without defining its equipment status meaning.
- Assuming a plastic indicator has a higher IP rating than specified.
- Treating company-level certification as automatic certification for every SKU.
Maintenance
Maintenance personnel should inspect panel indicators for loose mounting, damaged heads, abnormal illumination and connection issues during scheduled equipment inspection. Disconnect power before performing electrical work.
How to Choose a Plastic Indicator Light
How to Choose
For a 24v panel mount led project, begin with the mounting hole, electrical voltage, AC/DC requirement, LED color and terminal method. Then verify environmental conditions, certification requirements and production quantity. This approach helps purchasing teams compare equivalent products instead of comparing product names alone.
Buying Considerations
- Mounting hole: 16mm for this configuration.
- Voltage: 3–480V with customized voltage available.
- Connection: 2-pin terminal.
- Head: round raised plastic head.
- LED colors: Red, Green, Yellow, Blue and White.
- Environment: verify IP50 and temperature requirements.
- Certification: confirm the exact marks required for the target market.
Sizing Guide
| Mounting Size | Approximate Inch Equivalent | Typical Panel Use |
|---|---|---|
| 6mm | Ø0.236 in | Compact equipment panels |
| 8mm | Ø0.315 in | Compact control interfaces |
| 10mm | Ø0.394 in | Equipment and appliance panels |
| 12mm | Ø0.472 in | General equipment interfaces |
| 16mm | Ø0.630 in | Industrial control panels and distribution cabinets |
| 22mm | Ø0.866 in | Larger equipment interfaces |
Certification Guide
The product information supplied for this offering states CE, VDE, RoHS and CCC, while ISO9001 refers to the company’s quality management system. Procurement teams should request the applicable documentation for the exact configuration and target market before final approval.
Plastic Versus Metal Housing
| Housing Family | Advantages | Considerations |
|---|---|---|
| Plastic PA66 | Lightweight, electrical insulation, practical cost and suitable for large-volume panel assembly | Confirm environmental and mechanical requirements |
| Metal Housing Family | Can provide different mechanical strength and appearance options | May add weight and cost depending on construction |
RFQ Checklist
When requesting a quotation, provide product type, model, mounting hole size, voltage, AC/DC, LED color, head type, material, waterproof or IP requirement, wiring method, wire length if required, connector requirement, certification requirement, quantity, packaging, OEM requirement, logo, custom marking, target market, application environment and expected delivery date.
Providing these specifications helps FILN engineering and sales teams confirm product compatibility and quotation requirements more efficiently.
| Request a Quotation | Request 3D Model / CAD |
View More 16mm Plastic Indicators
View 16mm Metal Indicator Lights
FILN Manufacturing and Engineering Capabilities
FILN supports industrial buyers that need a manufacturer capable of product development, engineering communication, customization and production of indicator lights and related electrical components. For projects involving 24v panel mount led components, engineering teams can discuss mounting format, voltage configuration, LED color, terminal structure and application requirements.
| Capability | Buyer Benefit |
|---|---|
| Manufacturer | Direct technical communication for product sourcing |
| R&D | Support for product development and configuration discussions |
| Engineering Support | Helps confirm mounting, electrical and application requirements |
| OEM / ODM | Supports project-specific product requirements |
| Production and Assembly | Supports prototype, small-batch and mass-production requirements |
| Testing and Quality Control | Supports technical verification and production quality processes |
| Technical Communication | Useful for international purchasing and engineering teams |

Certification support can include documentation or confirmation for the applicable product and market. Company-level capabilities should not automatically be interpreted as certification of every individual SKU.
Factory Direct Supply
Yueqing Yulin Electronic Co., Ltd, operating under the FILN name, is located in Wenzhou, Zhejiang, and was established in 2006 as an electrical-switch manufacturer integrating R&D, production and sales. FILN products are supplied to customers in more than 100 countries.
The company operates a 10,000 m² facility with more than 20 production lines and an independent testing laboratory, supported by an ISO9001 quality system. Its production scope includes indicator lights, push-button switches, rocker switches, toggle switches and related customized small electrical components.
For purchasing teams sourcing a 24v panel mount led component, working directly with the manufacturer can simplify communication around drawings, electrical configuration, samples, customization, production requirements and technical documentation.

Company-level certification capabilities may include ISO9001 and other certification support depending on the product and market. The exact certification documentation for the ordered configuration should be confirmed before approval.
| Visit FILN Official Website | Send an RFQ to FILN |
View All Plastic Panel Indicators
Frequently Asked Questions
What is this 24V panel mount LED indicator?
This product is a 16mm plastic panel indicator with a round raised head, 2-pin terminal connection and nut-fixed mounting. The specified voltage range is 3–480V with customized voltage configurations available. A 24V configuration can be specified when it matches the electrical requirements of the application.
What mounting hole size does the indicator use?
The product uses a 16mm mounting format, approximately Ø0.630 inch. Procurement and engineering teams should confirm the actual mechanical drawing before production because the nominal mounting size should not replace the approved dimensional specification.
Can this indicator be configured for 24V?
Yes. The supplied product information specifies a 3–480V range with customized voltage configurations available. If the application requires a 24v panel mount led, the buyer should specify 24V and confirm whether the circuit is AC or DC before ordering.
What LED colors are available?
The available LED colors are Red, Green, Yellow, Blue and White. Color selection should be based on the equipment control logic and the status convention used by the machine or control system. White LED photometric data is not specified in the available product data.
How is the plastic indicator installed?
Prepare the correct circular panel opening, insert the indicator from the front, place the supplied plastic nut onto the threaded body from the rear and rotate the nut until the indicator is securely fixed. The actual hole and panel thickness should be confirmed against the approved product drawing.
Does this model use pin terminals or wires?
This configuration uses 2-pin terminals. FILN plastic indicator light families can also include pre-wired versions and other connection arrangements, but those should be treated as separate configurations and confirmed before ordering.
How do I prevent faint or phantom illumination?
Faint LED illumination can result from leakage current, induced voltage or electronic components in the circuit. Inspect the switching circuit, parallel loads and possible leakage paths. For a 24v panel mount led application, a qualified electrical engineer should verify the circuit before modifying the indicator or adding components.
Is this plastic indicator waterproof?
The available series data specifies IP50. This should not be interpreted as a washdown, immersion or outdoor waterproof rating. If a project requires higher environmental protection, contact FILN to confirm another suitable configuration.
What certifications or marks are available?
The supplied product information states CE, VDE, RoHS and CCC for this offering. ISO9001 refers to the company quality management system rather than an individual indicator. Buyers should request the applicable documentation for the exact configuration and target market.
Can FILN customize the voltage or other requirements?
The supplied product information states that voltage can be customized across the specified 3–480V range. Buyers can also discuss LED color, connection method, wire configuration for applicable versions, OEM requirements, markings and application-specific requirements with FILN engineering and sales teams.
When should I choose plastic instead of a metal indicator?
Plastic can be a practical choice when low weight, electrical insulation and economical panel assembly are important. Metal indicator lights may be considered when different mechanical strength or housing appearance is required. The best choice depends on the equipment design and environmental requirements.
What information should I include in an RFQ?
Provide the model, mounting hole, voltage, AC/DC requirement, LED color, head style, connection method, required certifications, quantity, packaging, OEM requirements, marking requirements, target market and application environment. Providing these details helps FILN engineering and sales teams confirm compatibility and quotation requirements more efficiently.
Where can I buy this 24V panel mount LED indicator?
The product can be purchased or evaluated through the FILN product channel. For project quantities, OEM requirements, technical documents, samples or configuration confirmation, purchasing teams can contact FILN directly.
How can I request a datasheet or 3D CAD model?
Send the product model, application and required document format to FILN. The engineering and sales teams can review the request and confirm the appropriate technical documentation for the ordered configuration.
| Request Datasheet | Request 3D CAD |
