Search

Scion Indicator Lights Hood Warning Indicator Light IP67

Malfunction Indicator Light Jeep

This scion indicator lights appear on two occasions.

Firstly, the scion indicator lights will appear for a few seconds when switching your ignition on, a sign that your starter system is working well.

Secondly, the scion indicator lights may stay on after a few seconds or suddenly turn on when riding. This is a warning that you have a problem with your electrical system.

Can I still ride with my ignition scion indicator lights on?

The ignition scion indicator lights won’t affect your riding, but it’s always best to turn your engine off as soon as it is safe. A battery that fails to charge will need replacing, and failing to do so could mean breakdowns or significant damage for your bike.

Get yourself to a garage before your battery loses the ability to hold charge completely.

What it means: Your car’s battery juice is running low.

What to do: First thing you should do is turn off anything that draws power from the battery, except for the heads coin indicator lights if you are driving at night. This includes the air conditioning and heating system, the stereo, any interior scion indicator lights, and any accessories such as heated seats or heated mirrors. Do not turn your car off until you get to somewhere safe, just in case it doesn’t start again.

Engine warning

What it means: If this is illuminated, it means there is an issue with your engine.

What to do: It may be down to a minor electrical issue, but it could also be something that is not checked straight away, which could lead to further and more substantial damage. Bring your car to the mechanic when you can.

If this warning illuminates, it’s very important to get your car checked, even if it feels completely normal to drive. This is because it warns of a potential problem with the engine, which you’ll want to avoid damaging at all costs. While it’s likely to be just a faulty sensor or minor issue, a proper diagnosis is critical to prevent potential damage.

This brake system warning scion indicator lights also require urgent attention. It may be that you’ve left the handbrake engaged scion indicator lights while pulling away, so ensure it’s fully released. If this doesn’t solve the problem, or the warning scion indicator lights appear as you’re driving along, pull over safely and call for roadside assistance or arrange for the car to be taken to a garage. It may be that the brake fluid level is too low and simply needs topping up, or that a brake pad wear sensor is faulty. However, it could also be a more serious issue with the braking system. While you can’t take the risk either way, if the pedal feels spongy when you press it or sinks all the way to the floor, then it’s easy to tell a significant issue has occurred and the car should definitely not be driven any further.

 

Your check engine scion indicator lights may appear for a variety of reasons. Sometimes, it can indicate a serious issue and require you to pull over immediately. This could indicate low oil pressure or overheat. Other times, this scion indicator lights will appear if your gas cap is open, loose, or cracked, causing fuel to evaporate.

 

If these scion indicator lights appear, it’s wise to pull over and check your gas cap and other systems in your vehicle. If it’s flashing, you should definitely stop driving! In most vehicles, a flashing check engine scion indicator lights signal that you have a serious problem that could cause serious damage if ignored.

Ordinary metal indicator light 

Brand-New Introduction Of 64 Dashboard Indicator Light

Click to view the video introduction of dashboard indicator light

Symbolic name Hood Warning Indicator Light
Panel Mount Diameter 8 mm, 10 mm, 12 mm, 14 mm, 16 mm
Contact Way With wire
Install Way screw terminal
Lamp Type LED
Rated voltage AC/DC,3V、6V、12V、24V、220V、380V
Lamp Color red yellow blue green white
Product Design convex head
Shell Material brass plated nickel/stainless steel
Base Material PA66 nylon
Terminal Material brass
Applications Coffee machine, kitchen equipment, household appliances,    automobiles, medical equipment, industrial equipment, etc
Component name material
lens PC plastic
Metal body H59 brass or 204 stainless steel
wahser T10 Cold Rolled Steel
rubber ring SIL silica gel
nut H59 nickel plated brass
housing PA66 nylon
Light source LED
Resistor Metal film
Cable PTFE AWG22 0.3mm²
plug-in C2680 RoHS brass
items parameter
Rated voltage 3V-780V DC or AC
rated current 20mA
rated power 0.2W
Insulation and voltage resistance 1800V
working life 100000h
electrical life 100000
cold-resistant -40℃
heat-resisting 80℃
Fill out my online form.