Product Category


FILN Red Lighted Round Switches 12 Volt For Car Truck Boat

What is a Round Switches 12 Volt for Car Truck Boat?

1.Installation aperture: The installation size of round switches is 19.5MM, and its installation method is direct buckle style. You only need to open a round hole 20MM on the round switches. Note that the thickness of the panel should be between 0.8MM and 2MM. , You put the round switches on the round switches panel, the ears on the round switches will jam the ship-shaped switch panel, the ship-shaped switch will not fall off, it is very convenient to use.

2.Waterproof grade: The round rocker switch is not waterproof. If you need a waterproof style, we have a round rocker switch with a waterproof cap. The waterproof level is IP67. The waterproof cap forms a seal. The waterproof cap is made of silicone material, which is waterproof and oil-proof, and can be used on kitchen equipment.

3.Current: The current of the round light switch is 5A. In the case of 250V, it can be used on mechanical equipment with a power of less than 1000W. If you want 10A ROCKER SWITCH, you can set the corners and middle feet of the rocker switch to the springboard (Figure 9 10 7) Change from brass to copper, and then change the contact silver point from 2.5MM to 3.5MM silver point, so that the current of the rocker switch can be increased.

4.Voltage: The voltage range of round power switch is 3-220v, the common ones are 3V 6V 12V 24V 110V 120V 220V 250V.

FILN Red Lighted Round Switches 12 Volt For Car Truck Boat

FILN Red Lighted Round Switches 12 Volt For Car Truck Boat

5.Color: The round power switch has 5 colors of red, green, yellow, blue and white.

6.Service life: The round rocker switch can be used 10,000 times under 1000W power. If it is higher than 1000W, the service life will be shorter, and if it is below 500W, the service life will be longer.

7.Material: The button of the round power switch is made of nylon PC material, and the lamp holder and the rocker switch base are made of nylon PA66 material, which is flame-retardant and high temperature resistant. When the rocker switch is welded with wires and lamp feet, it will not cause the ship base to melt. In the case of the situation, the metal feet of the rocker switch are made of brass H62.

8.Function: The function of round power switch is ON OFF function

 How to connect Red Lighted Round Switches?

First, connect one end of the round rocker switch to the power source, and connect the light pin of the rocker switch to one end of the device, and one end of the device to the power source, in a series connection. Then after the device is powered on, click the cat eye on the round rocker switch to see if the LED light of the rocker switch is on, and if it is on, then confirm whether the device is activated. If the device starts, it means that the round rocker switch has been connected.

FILN Red Lighted Round Switches 12 Volt For Car Truck Boat

How to buy a round switches?

You can buy our products directly online, such as Alibaba, or buy this round switches through offline email communication. There is no minimum order quantity requirement.

What is the advantage of FILN company producing round light switch?

1.The rocker switch produced by FILN has no MOQ. If you need samples to test, we can provide samples for free.

2.FILN company can provide customized service, you can directly solder the wire on the rocker switch, and then you can directly wire it.

3.The development speed of led rocker switch is fast. FILN has a professional engineer team for R&D and design of rocker switches, as well as a team of engineers specializing in the production of rocker switch abrasives. The design and abrasives of NEW 2 WAY ROCKER SWITCH are basically completed within 30-40 days. Development.

4.Respond quickly to ship-type switch issues. FILN’s sales staff are all sales engineers, who can solve and reply to any customer’s questions about ship-type switches in the fastest time.

If you need our products, are interested in our products, want samples, etc., please contact us directly. The email is as follows:

Ip67 4 pin rocker switch

Product Item KCD2-0101-1
Panel Mount Diameter 20mm
Contact Way solder pin
Install Way Buckle
Lamp Type LED
Rated voltage  12v, 24v, 110v,  220v, 250v
Lamp Color Red,white,blue,green,black,yellow
Shell Material brass plated nickel
Base Material PA66 nylon
Terminal Material brass
Applications Coffee machine, kitchen equipment, household appliances, automobiles, medical equipment, industrial equipment etc
Current 6A
KCD3 2 prong rocker switch
FILN onlin store
LED 4 prong rocker switch
Yellow 4 prong rocker switch

Inquiry Now