12V 110V 220V 14MM Red LED Mini Indicator Light
Mini Indicator Light development process
In June 2019, a factory producing commercial western food equipment in China approached us and asked us to develop an INDICATOR different from the one on the market, which is mainly used in high-end steam oven and oven.
There are several problems with the old indicator light that they are using now.
The indicator light looks ugly,
1.indicator light is temperature-resistant.
2.indicator light is the pin connection mode, which is very troublesome.
3.indicator light is cream foam, short life and bad color.
indicator light is not waterproof.
There is a lot of water vapor in the kitchen for a long time, which causes the indicator light to burn off.
In particular, the life of indicator light is too short, so they often go to customers for repair for a small indicator light, which has a great impact on their company’s brand and they have to pay very high maintenance costs.
Moreover, their previous indicator light suppliers were not very professional in producing indicator light and could not provide them with many professional instructions.
Therefore, FILN’s indicator light engineers customized an LED mini indicator light with 14MM installation hole and IP67 with direct cable according to customers’ needs.
Here are the details of this LED mini indicator light:
mini indicator light is the most important component, just like the human heart.
This mini indicator light uses infinite LED, with a service life of 50,000 hours, usually 6 to 10 years. The LED mini indicator light has a strong LIGHT source, so its brightness is very beautiful.
LED USES infinite, so when the production of 110V ac more than 4007 capacitor can be added, add a resistance of the same power can be.
If it is 12V 24V DC, there is no need to divide the positive and negative stages, direct wiring can be.
The LED mini indicator light is waterproof to IP68, so it doesn’t matter if you use it in a wet or wet environment.
This mini indicator light heads in a circle and it emits pretty good light.
The plastic material of red mini indicator light is made of PC and nylon material from Bayer of Germany, which is in line with THE ROSH standard of the European Union.
mini indicator light is used for roasting donkeys in high temperature, so the design of temperature resistance is 220 degrees. The teflon wire is used for temperature resistance of 220 degrees.
14MM indicator light can produce voltage of 3V 6V12V24V 36V 48V 110V 120V 220V 380V and so on
LED indicator light can produce a variety of colors such as red, green, yellow, blue and white
The mini indicator light lasts five years. FILN promises to replace the new mini indicator light free of charge if it breaks within five years.
The LED mini indicator light is installed at a diameter of 14MM, or 0.46 inches
The line of LED mini indicator light can be extended according to customer demand, and any terminal required by the customer can be added at the end of the line.
This LED mini indicator light has been approved by UL of the United States, ROSH of the European Union, and CE of the European Union. If the product is exported to the United States and the European Union, it can be safely used.
The production process of LED INDICATOR LIGHT is to install IS090001 quality management system to ensure the consistency and quality stability of indicator light.
Finally, if you have any customized indicator light and indicators you need, please do not hesitate to contact us at [email protected]