Hyundai Elantra malfunction indicator
What the jack mode warning Hyundai Elantra malfunction indicator light means
This Hyundai Elantra malfunction indicator light will look different depending on the vehicle so refer to the owner manual of your car so that you know what to look for. Whenever this Hyundai Elantra malfunction indicator light is illuminated, the vehicle suspension will not change its height allowing repairs to be performed safely.
Jack mode can be disabled manually or will usually deactivate after accelerating more than four or five miles per hour. If this Hyundai Elantra malfunction indicator light comes on while you are driving, try restarting the engine once you have pulled over and parked safely somewhere.
You l need the help of a qualified technician if the jack mode cannot be deactivated as then there it is likely to have a malfunction present.
Is it safe to drive with the jack mode warning Hyundai Elantra malfunction indicator light on?
The jack mode only prevents the suspension from adjusting its height but the suspension will still be able to absorb bumps and knocks in the road like normal.
However, depending on the type of car, having jack mode enabled all the time could make it difficult to get in and out of parking lots.
If this Hyundai Elantra malfunction indicator light refuses to turn off, you should have it diagnosed further as it could be an indication of a more serious problem.
Our certified technicians are always available if you are experiencing any issues with your adjusting suspension system.
What the steering lock warning Hyundai Elantra malfunction indicator light means
The steering lock indicator Hyundai Elantra malfunction indicator light is different from the power steering warning Hyundai Elantra malfunction indicator light, which is an indication of an actual steering problem so don’t get them mixed up.
To turn off the steering lock, insert the key into the ignition and turn it to at least the first position while turning the steering wheel in either direction. It shouldn’t take too much force to get the key to turn and unlock the steering wheel.
The steering lock indicator Hyundai Elantra malfunction indicator light should only come on when the ignition is in the off position and the lock is engaged. If you see it come on at any other time, you should have the car checked out by a qualified technician.
Is it safe to drive with the steering lock warning Hyundai Elantra malfunction indicator light on?
Usually, you will never see this indicator while on the road. Even if it were to come on while driving, it is very unlikely that the steering will actually get locked. Should it turn on while you are on the road, try restarting the engine once you have parked safely.
As long as the Hyundai Elantra malfunction indicator light goes out, you can continue using the car, but keep an eye out for it over the next few weeks.
If this warning Hyundai Elantra malfunction indicator light doesn’t go out or turns on again later, have your car checked out by a qualified technician in order to find out more information about the problem.
Our certified technicians are always available should you encounter any issues with your steering lock or steering system in general.
However, this high efficiency has a price in the form of some extra exhaust emissions. To help the catalytic converter break down the harmful gases, diesel exhaust fluid is slowly injected into the exhaust pipe.
The fluid vaporizes and once in the catalytic converter, the nitrogen oxides will get broken down into water and nitrogen which are harmless.
One of the more common diesel exhaust systems used is AdBlue, which can be found in American, European, and Japanese cars.
What the AdBlue warning light means
The AdBlue system has a pump that injects a small amount of the diesel exhaust fluid based on the engine operating conditions. A small tank with a fluid level sensor stores the liquid so that frequent fill-ups are not necessary.
There are three lights on the dash that can illuminate to warn you of any issues with the AdBlue system.
The first light is the low-level warning light. It should turn on well before the tank is completely empty so that you have plenty of time to get it filled up.
This light is typically yellow and once you have filled the tank with more exhaust fluid, it should turn off. If you do fill the tank, it will eventually turn red which is the no restart warning.
When this light is red, you will not be able to restart the engine once you have turned it off. If this happens while driving, take your car to get the tank filled immediately, otherwise, you won be able to start the engine again.
This is a feature designed to prevent drivers from going extended distances without any exhaust fluid. Again, topping off the tank should turn the light off.
Finally, if the computer detects any malfunctions within the system, the service engine light will illuminate along with the fluid level warning. This could indicate an issue with the delivery system or the fluid level sensor, or it could indicate that the incorrect fluid is being used.
You l need a diagnostic scan tool to read the error code and understand what is going on. Don ignore this light as using the incorrect fluid type could damage the system permanently.
Is it safe to drive with the AdBlue warning light on?
While this light does indicate a safety issue, neglecting the warning will eventually prevent you from starting the engine.
When you see the low fluid warning, you will still have a good amount of time before a refill is absolutely necessary. Don forget about it, or you could run out of fluid and potentially be stranded.
If any of your AdBlue warning lights are on, our certified technicians can help you refill your tank or diagnose any issues you may be having.
Ordinary metal indicator light
Brand-New Introduction Of 64 Dashboard Indicator Light
Click to view the video introduction of dashboard indicator light
