Push button starter switch means push the drive mechanism with push button, then make the moving contact and static contact connect or disconnect, thereby realize the circuit switch.

It is a master control electrical appliance which has simple structure and widely appliances.

In an electrical automatic control circuit, it manually emit control signals to control contactors, relays, electromagnetic starters, etc.

Push button starter switch can achieve basic control, such as start and stop. Each push button switch has two pairs of contacts, one normally open and one normally closed. Press the button, two pairs of contacts start to work at the same time. Normally closed contact is disconnected and normally open contact is closed.

There are many types of push button starter switch, and the wiring way is not unified.

How to wire a push button starter switch, please refer to below common wiring ways.

---

How to wire a push button starter switch with one color LED?

 

Push button starter switch with LED has five wiring terminal in total, it just shows how to connect the power wire, but how to connect the wire make the lamp light up?

Two terminals of the switch are for lamps, and the other three are for switches. Find out lamp and switch terminals, determine the switch terminal. Next, tandem connect the lamp directly to the switch terminal to be connected, the lamp light up after the switch is switched on. We have four wiring ways to meet customers’ wiring requirements.

 

How to wire a push button starter switch with an LED

1. In the standing state, the lamp of the push button starter switch with LED goes off, and equipment is not working. Push the push button switch, the lamp is light on, and equipment start to running.

Button State	Device	LED Lights
Normal	OFF	OFF
Press	ON	ON

2. In the standing state, the lamp of the push button starter switch with LED is light on, and equipment starts to running. Push the push button switch, the lamp goes off, and equipment stop running.

Button State	Device	LED Lights
Normal	ON	ON
Press	OFF	OFF

3. In the standing state, the equipment is not working. Push the push button switch, equipment start to work, and the light is on.

Button State	Device	LED Lights
Normal	OFF	ON
Press	ON	ON

4. In the standing state, the equipment is working. Push the push button switch, equipment stop working, and the light is on.

Button State	Device	LED Lights
Normal	ON	ON
Press	OFF	ON

Customers choose the connection way according to their own requirements. 2NO2NC is in two group, 1NO1NC. If you need to control more than one device, select 2NO2NC, then connect according to the above connection diagram.

---

How to wire a push button starter switch with dual color LED

Push button starter switch with dual color LED has six wiring terminals, three of which connect the lamp, the other three connect switch. Find out lamp and switch terminals, then determine the terminals to be connected switches. Connect normally closed pin and light according to customer’s equipment requirements, the light comes on when the switch is turned on.

Push button starter switch with dual color LED is divided into two-color common cathode, two-color common anode and independent LED lamp beads.

Red and green are common colors for two-color product, we will use it as sample to produce the wiring.

---

The following is the most conventional wiring.

In the standing state, the red lamp light up, equipment stop to work. Press the push button switch, the green lamp light up, equipment start to running

Similarly, in the standing state, if customer want the green lamp light up and the equipment not work. Green lamp connect NC while red lamp connect NO, Press push button switch, then the red lamp light up, equipment start to running.

Except two-color of red and green, there are two-color of red and yellow, two-color of yellow green etc.

We can adjust the color of two-color light according to customer’s needs. If you’re interested in our products and have any questions, please contact us, we will respond to your email within 12 hours.

If you want to buy a single sample, you can browse our shop.

If you need customized production, please leave us a message, and we will actively respond to your needs.