1.Installation aperture: The installation size of the 4 terminal rocker switch is 30x22mm, and the installation method is buckle. Just open a 30x22mm installation hole on the 4 terminal rocker switch and press the 4 terminal rocker switch into the installation hole by hand, 4 terminal The ears on both sides of the rocker switch will jam the panel, and the 4 terminal rocker switch will not fall off, which is very convenient to use. Note that the panel thickness should be between 0.8-2mm.
2.Current: The current of Red 4 terminal rocker switch is 30A, we can also provide 15A and 20A.
3.Voltage: The voltage range of 4 pole rocker switch is 3-220v, the common ones are 3V 6V 12V 24V 110V 120V 220V 250V.
4.Color: 4 pole rocker switch has 6 colors of red, green, yellow, blue, white and black.
5.Service life: 4 pole rocker switch can be used 100,000 times under 1000W power. If it is higher than 1000W, the service life will be shorter, and if it is below 500W, the service life will be longer.
6.Material: The buttons, lamp holders and rocker switch base of the momentary 4 terminal rocker switch are made of nylon PA66 material, which is flame-retardant and high temperature resistant. When the rocker switch is welded with wires and lamp feet, it will not cause the boat base to melt. In addition, the metal feet of the rocker switch are made of brass H62.