Table of Contents
22MM Waterproof Filn Metal Emergency Stop Push Button
- Mode: FLM22-11DMJ
- Voltage: 36V(DC), 250V(AC)
- Keyword: Emergency Stop Push Button Switch
- Current: 5A(DC), 5A(AC)
- Color: Red, White
- Material: Copper, Stainless Steel
- Certification: CE, CCC, Rosh, IP65, UL
- Waterproof grade: IP65
- Wire specification: AGW22
- Email: inquiry@cnylin.com.cn
- Download PDF: 22MM IP65 FILN Emergency Stop Push Button Switch
Emergency stop push button parameters
Production Series | FLM22-11DMJ | Light Guide Button | |
Button Shape | round | Actuator | 304 Stainless steel |
Button LED Color | Housing Sleeve | H59 nickel plated brass/304Stainless steel | |
Mechanical Life | The 500 thousand time | Button Pin | H62 copper alloy |
Electrical Life | The 100 thousand time | Rubber Ring | SIL silica gel |
Protection Level | IP65 IK08 | Nut | H59 nickel plated brass |
Rated Voltage | 36V(DC)250V(AC) | Housing | PA66+GF20% nylon |
Rated Current | 1A(DC)5A(AC) | Light Source | |
Rated Power | 180W(DC)1250W(AC) | Resistor | Metal film |
Operating Temperature | -25℃~+85℃ | Contact | AgCdO12 |
The description of the 22mm waterproof Filn metal emergency stop push button.
- The mounting hole size of the product is 22mm. We can produce the size of 16mm and 19mm, etc.
- We can produce the Emergency Stop Push Button with the function of 1NO1NC or with the function of 2NO2NC. 1NO1NC product has 3 pins, it controls single road, 2NO2NC product is dual-way controlled.
- The head material is zinc alloy, which can be oxidized into a variety of colors. The most conventional color is red. Head size can be produced according to your size requirements.
- Rated current is 5A 250V AC. The service life is 100,000 times that can be used on the motor.
- We can produce the waterproof product and the waterproof rating is IP65.

What is the emergency stop push button?
The industry called the product the “emergency stop push button” for short. When an emergency occurs, one can achieve protection by quickly pressing this button.
The striking red push button switch can be seen on many automation devices. It has red fonts, which has the same meaning as “emergency stop”.
This push button is collectively known as an emergency stop button. This button is just pressed down directly. You can quickly let the whole device stop or release some transmission parts immediately.
To start the device again, you must rotate the button, which is only released after rotating clockwise for about 45° and the machine can be energized.

In industrial safety, when an abnormal situation occurs, it usually means that some transmission components will cause direct or indirect damage to the human body of the machine. Protective measures must be taken, and the emergency stop button is one of them.
Therefore, the emergency stop button must be added when designing some machines with transmission parts. Meanwhile, it should be installed on the machine surface for convenient personnel press and without any blocks.
How to wire Emergency Stop Push Button?
The product has 4 wiring ways.
The wiring way 1
Light: Not working,
Switch: Opened
When you press the button, the light is working, the switch is closed.

The wiring 2
Light: Working,
Switch: Opened
When you press the button, the light is working, the switch is closed.

The wiring 3
Light: Working,
Switch: Closed
When you press the button, light is not working, switch is opened.

Light: working
Switch: closed
When you press the button, light: working, switch: opened

Where to buy the emergency stop push button?
If your time is urgent, you can place an order at www.cnfiln.com, we will arrange the delivery at the same day, or you can purchase the product through the email communication offline.
The weight of per product is about 0.05KG, we will choose the delivery way according to customer’s purchase quantity.
The quantity of per box is 20 pieces, and one box has 500 pieces. The product has no MOQ, we can supply samples free of charge for your test.

The product of Filn had passed the certifications of CE, ROSH, ISO90001, and also has an professional push button laboratory, which can ensure the product’s quality.
Except push button switch, Filn also produce supporting indicator lights, rocker switches, etc., if you want to custom the push button switch or indicator light, you can contact us immediately, we will give you a satisfactory solution within 24 hours.
If you are interested in our products or want to purchase them, or you need the samples, please contact us directly, our email address is inquiry@cnylin.com.cn.
