The specific output of KCD4 rocker switch with light

The rocker switch is also called rocker switch and wave switch. Its structure is the same as that of the toggle switch, except that the knob is replaced with a boat shape. The ship-type switch is often used as a power switch for electronic equipment. Its contacts are divided into single-pole single-throw and double-pole double-throw, and some switches also have indicator lights. There are some pad printing on its surface. It is convenient to distinguish the position status of rocker work.

The ship-type switch is used in drinking fountains, treadmills, computer speakers, battery cars, motorcycles, ion TVs, coffee pots, plugs, massage machines, etc. It is mainly used in household appliances and the like.

The rocker switch has some types, first is single pole single throw: 1 moving contact and 1 static contact. Only 1 channel. Second is Single pole double throw: 1 moving contact and 2 static contacts, (the static contacts on both sides can be connected separately). The third is double pole single throw, 2 moving contacts, and 2 static contacts, with 2 channels. Fourth is double pole double throw, 2 moving contacts, and 4 static contacts, with 4 channels (can connect 2 static contacts on both sides).

According to the size classification, the ship type switch can be divided into KCD1 series boat switch, KCD2 series boat switch, KCD3 series boat switch, KCD4 series boat switch, KCD5 series boat switch. The product model of our company is FL3-X (X=1, 2, 3…).The button mode has reset and do not reset.

There are some technical parameters as below.

Rated voltage/current: 6A 250VAC/10A 125VAC

Contact resistance: ≤50mΩ

Withstand voltage: 1500V, AC/min

Insulation resistance: ≥100mΩ

Rated load: 2/8A 250V AC

Electric strength: ≥1500VAC/min

Temperature range: -25~85℃

Electrical life: ≥10,000 times

If you have a problem like: The boat-shaped switch, the kind of red light that is very common when it is turned on. Sometimes I can’t turn it off, but I can’t get it back, and the air switch often fails. The solution to the fault: There is a metal sheet inside the boat-shaped switch with a spring fulcrum in the middle, spring displacement and aging deformation of the plastic bracket, the switch is not flexible, you can disassemble it after power off to see if it is not damaged by plastic parts, maybe it can be restored. The neutral line inside the switch is straight through and has nothing to do with the switch parts. Therefore, if the switch jumps to the air switch, the insulation layer of the neutral line of the switch is damaged. The damaged section can be cut off and rewired. Pay attention to the insulation. . It may also be that there is a short circuit in the foot of the indicator, just re-wire.

And I want to introduce our KCD4-0112-22 to you, the picture and drawing as below.

The specific output of KCD4 rocker switch with lightThe specific output of KCD4 rocker switch with light

Some information i will tell you about its accessoriee name and material.

Actuator: PC

light guiding part :PC

holder :ABS

Waterproof cover: Rubber

Up base :ABS

Bottom base :PA66

Middle base: ABS

Pin/spring board :H62 Brass H62

Contact: AgCdO12

Spring: 72#

Iron case :08F


Some information of out looking and operation feeling:

Clear and firm marking; The appearance is clean and beautiful, no deformation, no damage, no cracking; No rust, no electroplating;  The components are firmly connected, no looseness, no falling off; The switch operation is flexible, no jamming, no obvious friction

Some information of electrical Endurance for you: Under rated load, 30 operations per minute for a total of 10,000 operations.There are some technical requirements:  1. Appearance and feel are acceptable; 2. Contact resistance ≤ 2Ω; 3. Terminal temperature rise ≤ 55K; 4. The pressure test is qualified.

Some information of alternative temperature for you:According to the temperature and time shown in the figure, the temperature alternation was carried out for 5 consecutive cycles, and then the test was carried out in the natural environment for 1 hour.

The specific output of KCD4 rocker switch with light

Some information on resistance to soldering Heat for you: Terminal welding part of the immersion temperature for 260 ± 5 ℃ molten tin furnace 3 ± 1 second. Manual soldering iron welding, the welding temperature of 350 ± 5 ℃, welding time 3 ± 1 seconds. No pressure shall be applied to the terminals during welding. There are some technical requirements: 1. The body has no obvious deformation; 2.Mechanical performance, electrical performance test qualified.

Some information of operation force for you: The switch is placed perpendicular to the direction of operation, applying a force on one side of the button to measure the maximum force required to turn the switch on.

Some information on solderability for you: The terminal into the molten tin bath, the temperature of 235 ± 5 ℃, time of 3 ± 0.5 seconds. There are technical requirements: More than 90% of the immersed portion is covered with tin.

Some information on withstanding Voltage for you: Working at DC500V Between pins, in 10 seconds; Working at DC500V Between pins and housing, in 10 seconds. There are technical requirements: No breakdown or flashover.

And some other information i want to tell you :

1.What is waterproof rocker switch ?
It designed based on normal rocker switch with waterproof function, so it can prevent the water from inside rocker switch when it used outdoor and water surface.
2.When start designing the rocker switch ?
FILN company began to product and design KCD4 waterproof switch series in 2016. It is very popular all over the world especially in the UAS market.
The introduction of KCD4 waterproof rocker switch series as follows :
How many kinds of voltage can the waterproof rocker switch have?
The range of voltage could be 3V,6v,12v,24v,36v,110v,220v,380v,440V.
3.What current of rocker switch can be reach ?
It has designed a high-current ship-type switch that could reach 30A at 12v and 250V. Its power can reach 5000W.
4.What is the size of the mounting hole of the rocker switch?
It has 3 sizes can be chosen, like 28X22, 30X22 ,31X22mm.
5.How about the waterproof degree of switch ?
It can be reach IP67 and IP68.
6.How many colors of switch ?
It can be made red, yellow,green, blue,white,black and orange etc. We also can use LED as the light source.
7.How many types of rocker switch for the use function?
It has ON-OFF, ON-ON,ON-(OFF),ON-(ON),ON-OFF-(ON),(ON)-OFF-(ON) etc 7 function.
8.How many different styles are there on the surface of the rocker switch? Can the Rocker Switch be customized with a customer logo?
The rocker switch surface has stainless steel surface, painted surface, and plastic surface, and can support the customization of various logos on the rocker switch surface.
9.What international certifications are there for rocker switches?
Rocker switch has CE, UL, CQC, ROSH certification, etc.
10.Where are waterproof rocker switches usually used?
Waterproof rocker switch is used very widely, usually used in kitchen equipment, yacht equipment, automation equipment, electrical products, baby carriages, cars, motorcycles, refrigerator refrigeration, etc.
11.What is the MOQ of the rocker switch?
FILN is a direct factory that produces waterproof switches, so there is no MOQ limit, and you can order from one.