Product Category


FILN 19mm High Current 15A Metal Small Push Button LED lights

  • Name:Push Button Led Light
  • Voltage:1.5V-250VAC/DC
  • Head Type:Flat Head
  • Keyword:Push button LED light
  • Current: 3mA~15A
  • Material: copper, stainless steel
  • Download Certification: UL,CE,CB,CCC
  • Waterproof grade: IP67
  • model:FLM19-FJ-6-EX000-S10Z
  • Email:
  • Download Specifications:FILN 19mm High Current 15A Metal small push button LED lights

Product Drawings:

FILN 19mm High Current 15A Metal Small Push Button LED lights

Table of Contents

What are the features of FILN 19mm High Current 15a Metal small push button led lights?

The features of the FILN 19mm high current 15A metal small push button LED lights are as follows: the mounting hole size is 19mm, it is designed with 1 NO and a large current, the maximum current can reach 15A, built-in LED bright, high service life beads.

The description of the FILN 19mm high current metal push button LED light with ring.

The opening hole size of the push button LED lights is 19mm, the material of the shell can be 304 stainless steel, copper plated nickel , aluminum alloy oxidized to a variety of materials.

The maximum current of the 19mm push button LED light can reach 15A 250VAC, such a large current design has a longer electrical life in some large current scenarios, the average mechanical life of the button reaches about 100,000 times.


Product Parameters:

Production Series FLM19-FJ-6-EX000-S10Z Light Guide Button
Button Shape round Actuator 304 Stainless steel
Button LED Color Red, blue, green, Orange and white Housing Sleeve H59 nickel plated brass/304Stainless stee
Mechanical Life 500,000 times Button Pin H62 Copper alloy
Electrical Life 250,000 times Rubber Ring SIL silica gel
Protection Level IP67 IK10 Nut H59 nickel plated brass
Rated Voltage 1.5V-250VAC/DC Housing PA66+GF20% nylon
Rated Current 1.5V-250VAC/DC Light Source LED
Rated Power 36W(DC)125W(AC) Resistor
Operating Temperature -30℃~+80℃ Ccontact AgCdO12

Push Button Switch Wiring Method:

FILN 19mm High Current 15A Metal Small Push Button LED lights

How to wire led light push button switch?

The wiring method of the first mode of operation

Requirements: the light is on when switch is locked, device starts, light is off when switch is reset, device is closed.

The power supply positive pole is connected to the switch load pin, and the other load pin is connected to the positive pole of the LED lamp and device.

The negative pole of the power supply is connected to the negative pole of the device and LED.

The wiring method of the second mode of operation

Requirements: Device starts when switch is locked, device is closed when switch is reset, and the light is normally bright.

The positive pole of the power supply is connected to the switch load pin and positive pole of the LED pin, the other load pin is connected to the device’s positive pole.

The negative pole of the power supply is connected to the negative pole of the device load and LED pin.

FILN 19mm High Current 15A Metal Small Push Button LED lights

FILN 19mm High Current 15A Metal Small Push Button LED lights

The FILN push button LED lights are divided into momentary push button LED light and latch push button LED light by the function.

The pin of the small push button LED lights adopts 4.8*0.5mm fast terminal, riveted with large contacts, the current can be larger. At the same time, the tail of the fast terminal can be processed by various wire and different materials.

How to make a push button led light?

The shell of the FILN push button LED light was processed using a high-precision CNC lathe, the base adopts a high-temperature-resistant material, such as PA66 with flame-retardant function. After the machine has riveted the fast connection terminal, weld the resistance and LED beads on the pin, this can satisfy the use of different voltages, such as 12V, 120V, 220V lights.

The button of the FILN push button LED light is installed on the base, then put the 19mm stainless steel shell to the seat, and finally use the tooling clamp for riveting tooling. Before riveting, conduct a FILN push button LED light on-off test, a lights-on test, and a final appearance inspection.

What are the advantages of FILN push button LED light?

The 15A metal small push button LED lights had passed the certifications of the American UL certification, EU CE, ROSH, REACH. The button’s touch feel is excellent, beautiful appearance and accept customization.

5.KC4D 2 way rocker switch

Where does the 15A push button LED light used?

This FILN 19mm high current metal push button LED light with ring is generally used in small household appliances, such as water purifiers, hot kettles, heaters, and negative ion generators, range hood, doorbell, control box, monitoring and security, etc. On the children’s toy, such as the balance car, remote control car. On the communication equipment, such as 4G, 5G signal control box.

On the large current industrial machinery and equipment, such as laser cutters, cranes, printing presses. On the machine equipment, such as oven, range hood.

FILN 19mm High Current 15A Metal Small Push Button LED lights

How to buy this 15A push button LED light

  • If you need to customize the FILN push button LED light or want to wiring directly , you can write an email to our button technical engineer, and he will give you a satisfactory solution, his email address is
  • If you need a large amount, you can mail directly to our international trade sales staff who have over 10 years of overseas sales experience and will give you good prices and excellent service, their email address is
  • If you need a small amount of 15A metal small push button LED lights, you can place an order on,FILN will arrange the delivery on the same day.
  • If you need samples for test, FILN will provide the samples free of charge.

The FILN push button LED light had passed the quality management system certifications of UL, CE, ROSH, ISO90001, and also has a professional button switch test laboratories to ensure the quality of the buttons.

FILN has over 11 years of button production experience, and a professional R&D team that can customize various styles of button switches according to your requirements.

If you have any questions about the LED push button, please contact us immediately, we will give you a satisfactory reply within 24 hours.

Solve the problem of rocker switch
Development of a new rocker switch
Customized production of rocker switch

Comprehensive Guide to Push Button LED Lights: Usage, Features, and More

Push button LED lights are transforming the way we interact with technology in various applications, from home settings to industrial machinery. This comprehensive guide delves into everything you need to know about LED button lights, including different types, specifications, installation guidelines, environmental considerations, quality certifications, and troubleshooting. Whether you’re looking to enhance your home’s ambiance with tiny button lights or implementing large-scale solutions with LED button lights 12v, this article provides insights and practical tips to make the most out of these versatile and energy-efficient devices. Join us in exploring how push button LED lights are lighting up our world in new and innovative ways.

Step 1 – Top 10 Frequently Asked Questions about Push Button LED Lights

  1. What are push button LED lights and how do they work?
  2. How can I find push button LED lights for specific applications like the classroom or automotive uses?
  3. Are there differences in voltage for push button LED lights, such as 12v models?
  4. What are some popular brands for small and tiny push button LED lights?
  5. Where can I buy LED push lights from the dollar tree or other budget options?
  6. How do wireless LED touch lights differ from regular push button LED lights?
  7. How do light up buttons work in the classroom, and what are their educational applications?
  8. What are the technical specifications and features of the 19mm momentary push button lamp switch?
  9. How to install or replace LED illuminated push button switches with wire?
  10. How do LED arcade buttons function, and what are their specific characteristics?

Step 2 – Understanding Push Button LED Lights: Their Working and Applications

What are Push Button LED Lights?

Push button LED lights are versatile lighting devices operated by a simple button mechanism. Pressing the button completes an electric circuit, activating the LED. This simple design allows for various applications, including decorative purposes and signaling. More about these can be explored at Indicator Light’s push button LED light page.

How do They Work?

The mechanism of push button LED lights includes a switch, LED bulb, and power source. When the button is pressed, electricity flows through the circuit, illuminating the LED. The technology behind it is similar to traditional LEDs but with the added convenience of a push button.

Different Applications

  1. Home Use: For accent lighting or night lights.
  2. Automotive: As indicators or decorative elements in cars.
  3. Educational Settings: Light up buttons for interactive learning in classrooms.

Step 3 – Finding Push Button LED Lights for Specific Applications

Push Button LED Lights for Classrooms

For classroom applications, light-up buttons can serve as interactive tools to engage students. They can be used in quizzes, games, or feedback systems. More about their use in education can be found at this link.

Automotive Uses

LED Button Lights are often used in automotive applications for signaling and decorative purposes. They are versatile, energy-efficient, and can be customized according to vehicle specifications. For automotive purposes, you can explore this latch metal push button switch with LED.

Finding Specific Voltage Options (e.g., 12v)

Specific voltage requirements can be met with various models, including 12v LED button lights. These are used in scenarios requiring lower voltage, ensuring energy efficiency and compatibility with certain devices. Details about different voltage options are available at this 28mm LED ring button page.

When it comes to LED Button Light, popularity often comes from quality, design, and customer support. Brands offering compact designs for specific applications like toys, gadgets, and small decorations tend to be more sought-after.

Notable Brands

  1. Brand A: Known for high-quality small LED push light.
  2. Brand B: Offers innovative tiny button light designs.
  3. Brand C: Renowned for customizable options.

For more details on brands, visit LED push button switch page.

Purchasing from Reputable Sources

It’s crucial to buy from reputable sellers to ensure quality and support. Whether purchasing wireless LED touch light or other types, credible sources offer warranties and customer care.

Step 5 – Budget Options: LED Push Lights from Dollar Tree and Others

Why Choose Budget Options?

Budget options like LED push lights from the dollar tree provide affordability without necessarily compromising quality. They are suitable for temporary setups or less demanding applications.

Where to Find Them?

Various stores offer budget LED push lights, including discount retailers, online marketplaces, and dollar stores. Explore options at this lighted push button switch page.

Considerations When Buying Budget Options

  1. Quality Assurance: Check for certifications and reviews.
  2. Warranty: Some budget options may offer limited warranties.
  3. Application: Consider the intended use, as budget options may not be suitable for all applications.

Step 6 – Wireless LED Touch Lights vs Regular Push Button LED Lights

What are Wireless LED Touch Lights?

Wireless LED touch lights are modern variations of push button LED lights that are activated by touch rather than a physical button. They offer the convenience of touch sensitivity and often include wireless capabilities. Learn more about them at this LED illuminated push button switch wire page.

How They Differ from Regular Push Button LED Lights?

  1. Operation: Touch-sensitive instead of physical pressing.
  2. Design: Often sleeker and more modern in appearance.
  3. Convenience: Can be controlled remotely in some models.

Applications of Wireless LED Touch Lights

  1. Home Automation: Integration with smart home systems.
  2. Modern Decor: Sleek design for contemporary interiors.
  3. Accessibility: Suitable for those with physical limitations.

Step 7 – Classroom Use of Light-Up Buttons: Educational Applications

Engaging Learning Tools

Light-up buttons for classroom use are innovative tools for making learning interactive and fun. They can be incorporated into quizzes, rewards systems, or visual aids.

Types of Educational Light-Up Buttons

  1. Interactive Whiteboards: With touch-sensitive buttons for real-time responses.
  2. Quiz Buzzers: Allowing students to participate actively.
  3. Learning Toys: With buttons to teach colors, shapes, etc.

More insights on educational applications can be found at this 19mm momentary push button lamp switch page.

Benefits of Using Light-Up Buttons in Classrooms

  1. Enhanced Engagement: Makes learning more engaging and participatory.
  2. Visual Learning Support: Helps visual learners grasp concepts easily.
  3. Flexibility: Can be adapted to various subjects and learning levels.

Step 8 – Technical Specifications and Features of 19mm Momentary Push Button Lamp Switch

What is a 19mm Momentary Push Button Lamp Switch?

A 19mm momentary push button lamp switch is a specific type of push button switch used mainly for lamps and lighting applications. It is designed to be pressed momentarily, activating the circuit temporarily. Detailed specifications can be viewed at this page.


Technical Specifications

  1. Diameter: 19mm
  2. Operation: Momentary (returns to original position)
  3. Voltage: Various options, including 12v and 24v
  4. Material: Often made of metal for durability

Features and Benefits

  1. Easy to Install: Generally comes with simple installation guides.
  2. Versatility: Can be used with various types of lighting applications.
  3. Aesthetic Appeal: Available in various designs and finishes.

Step 9 – Installation and Replacement of LED Illuminated Push Button Switches with Wire

Why Consider Installation or Replacement?

Over time, push button LED lights may require replacement or new installations for upgrades or design changes. Proper installation ensures functionality and safety.

Installation Steps

  1. Turn Off Power: Always ensure the power is off before installation.
  2. Prepare Tools: Gather necessary tools like screwdrivers, wires, etc.
  3. Connect Wires: Follow the wiring diagram provided with the switch.
  4. Test Operation: Turn on the power and test the functionality.

For comprehensive guidance, you can visit this page on LED illuminated push button switch wire.

Considerations for Replacement

  1. Compatibility: Ensure the new switch is compatible with the existing system.
  2. Professional Assistance: Consult an electrician if unsure about the process.
  3. Safety Protocols: Follow all safety guidelines and instructions.

Step 10 – Function and Characteristics of LED Arcade Buttons

What are LED Arcade Buttons?

LED arcade buttons are specialized push button lights designed for arcade gaming machines. They are colorful, responsive, and add to the gaming experience. You can explore more about them at this LED arcade buttons page.

Features of LED Arcade Buttons

  1. Responsiveness: Quick response for fast-paced gaming.
  2. Customizable: Available in various colors and designs.
  3. Durability: Built to withstand intense gaming sessions.

Applications in Gaming

LED arcade buttons are essential components in arcade gaming machines, offering a tactile experience and visual appeal.

Step 11 – Additional Insights on Push Button LED Lights

Understanding On/Off Switch Symbols

On/off switch symbols are commonly found on push button LED lights, indicating the operational status. More details about the symbols can be found at this on/off switch symbol page.

Exploring Single Point Plastic Illuminated Switches

Single point plastic illuminated switches are specialized push button lights offering a sleek appearance and specific functionalities. They can be explored further at this single point plastic illuminated switch page.

Waterproof Options for Outdoor Use

For outdoor or marine applications, 24v waterproof metal push button switches are available, offering resistance to weather conditions. Details can be found at this 24v waterproof metal push button switch page.

Momentary Push Button Switches with Various Voltage Options

Momentary push button switches are available in various voltages, including 110v. These offer temporary activation and are used in specific applications. Explore them at this 110v momentary push button switch page.

Marine Applications

For marine environments, specialized push button switches like the 19mm red LED marine push button switch are designed with resistance to saltwater and weather conditions. More about them can be explored at this 19mm red LED marine push button switch page.

Push button LED lights offer a wide array of applications, from home decor to advanced industrial uses. Their flexibility, energy efficiency, and innovative designs make them an essential part of modern living. Understanding their specifications, brands, budget options, and specialized types like wireless touch lights, light-up classroom buttons, and arcade buttons ensures a tailored approach to their selection and usage.

Explore Indicator Light’s full range of products.

Step 12 – Safety Precautions When Using Push Button LED Lights

Understanding Safety Measures

It’s essential to recognize and adhere to safety protocols when dealing with electrical components like push button LED lights. Proper handling ensures not only the smooth operation of the devices but also the well-being of the users.

Tips for Safe Handling

  1. Read Instructions: Always follow the manufacturer’s guidelines and instructions.
  2. Use Proper Tools: Utilize appropriate tools and wear protective equipment if needed.
  3. Avoid Water Exposure: Ensure the device is safe from any liquid spill or moisture unless it’s specifically designed to be waterproof.
  4. Ensure Proper Wiring: Incorrect wiring may lead to malfunction or hazards; follow the wiring diagrams accurately.
  5. Consult Professionals if Needed: If unsure, seek professional assistance for installation or troubleshooting.

Safety Regulations Compliance

  1. Understand Regulations: Be aware of and comply with local safety regulations and standards.
  2. Certification: Look for products that are certified by recognized bodies for safety assurance.

Step 13 – Environmental Considerations for LED Push Button Lights

Eco-Friendly Features of LED Lights

LED push button lights are generally more environmentally friendly compared to traditional lighting methods. The following features make them a preferred choice for those conscious of their environmental impact:

  1. Energy Efficiency: Consumes less electricity, thus reducing energy waste.
  2. Longevity: Lasts longer, thereby reducing the frequency of replacements.
  3. Less Heat Emission: Emits less heat, thus minimizing energy loss.
  4. Recyclable: Many parts of LED push button lights can be recycled.

Environmental Certifications

Look for products that have been certified by relevant bodies for environmental safety, such as Energy Star or other green certifications.

  1. Philips: Known for quality and innovation.
  2. Osram: Offers a wide range of products.
  3. Samsung: Renowned for reliability and cutting-edge technology.

Price Ranges

  1. Economical: Suitable for those on a budget, often found in generic brands.
  2. Mid-Range: Offers a balance between cost and quality.
  3. Premium: Higher cost but offers advanced features and long-term durability.

Where to Purchase?

  1. Online Platforms: Websites like Amazon, eBay, etc.
  2. Retail Stores: Local electronic stores and supermarkets.
  3. Specialized Dealers: For specific needs or bulk purchases, specialized dealers might be the best option.

Step 15 – Push Button LED Lights in Industrial Applications

Significance in Industries

Push button LED lights are utilized in various industrial applications for signaling, controlling machinery, and providing visual feedback. They are integral in ensuring smooth operations and safety in industrial environments.

Specific Industrial Uses

  1. Control Panels: In machinery control panels for operational commands.
  2. Signal Indicators: For displaying system status and alarms.
  3. Emergency Stop Buttons: Often equipped with LED to indicate emergency stop functionality.

Industrial Standards

  1. Compliance: Ensure the product complies with industrial standards like IP ratings for durability and safety.
  2. Selection: Choose according to the specific industrial environment, such as explosion-proof for hazardous areas.

Push button LED lights are more than just simple gadgets; they have become integral components in our daily lives and industrial processes. With a myriad of applications ranging from simple household uses to complex industrial functionalities, these innovative devices continue to evolve and offer new possibilities. By understanding their types, specifications, safety considerations, environmental impacts, market dynamics, and industrial applications, one can make informed decisions and utilize these versatile tools to their full potential. Whether it’s a simple LED illuminated push button switch with wire, a 24v waterproof metal push button switch for marine use, or a customized LED arcade button for gaming enthusiasts, the world of push button LED lights offers endless opportunities to explore.

Step 16 – How to Choose the Right Push Button LED Light for Specific Needs?

Assessing Your Needs

Understanding your specific needs is the first step towards choosing the right push button LED light. Consider factors such as location (indoor or outdoor), required brightness, color, and functionality.

Considering Technical Specifications

  1. Voltage: Choose the appropriate voltage (e.g., 12v LED button lights) depending on the application.
  2. Brightness: Evaluate the required lumens based on the area to be illuminated.
  3. Color Options: Different color LEDs are available, including red LED marine push button switches, for unique applications.
  4. Waterproofing: If used outdoors or in wet conditions, look for waterproof options like 24v waterproof metal push button switch.

Analyzing Cost and Quality

  1. Budget Considerations: Analyze your budget and look for options within that range, considering both quality and features.
  2. Quality Brands: Investing in reputable brands ensures reliability and longevity.

Consulting Experts

If your requirements are complex, it might be wise to consult professionals or experts in the field, who can guide you in selecting the best push button LED light for your specific needs.

Step 17 – Understanding the Functionality of LED Push Buttons in Vehicles

Usage in Automobiles

Push button LED lights are widely used in vehicles for various functions, such as indicator lights, dashboard controls, and even start/stop buttons.

Types and Specifications

  1. Start/Stop Buttons: These are commonly used in modern vehicles to start and stop the engine with a simple press.
  2. Control Buttons: For adjusting different vehicle settings, often illuminated for better visibility.
  3. Signal Indicators: Including turn signals and warning indicators.

Choosing the Right LED Button Light for Your Vehicle

  1. Compatibility: Ensure the chosen LED button light is compatible with your vehicle’s make and model.
  2. Quality: Look for products that meet automotive quality standards.
  3. Professional Installation: Engage a professional for installation if required.

Step 18 – The Role of Push Button LED Lights in Smart Homes

Integrating into Smart Home Systems

LED push button lights can be integrated into smart home systems, allowing for intuitive control and automation of lighting and other home functions.

Types of Smart Push Button LEDs

  1. Wireless LED Touch Lights: Control lighting through touch or smartphone applications.
  2. Voice-Controlled Buttons: Interact with voice commands through smart home assistants.
  3. Programmable Buttons: Schedule lighting patterns and automation through programmable buttons like single point plastic illuminated switch.

Compatibility and Integration

  1. Compatibility: Check if the push button LED lights are compatible with your existing smart home system.
  2. Integration with Other Devices: Consider how the LED buttons will integrate with other devices in the home.
  3. Ease of Use: Look for user-friendly options that can be easily controlled by all family members.

Step 19 – Push Button LED Lights in Gaming and Arcade Applications

Enhancing Gaming Experience

LED button lights, especially those designed for arcades, add visual appeal and interactive experience to gaming environments.

Types of Gaming LED Button Lights

  1. Arcade Buttons: LED arcade buttons like those found at this link are popular in gaming consoles.
  2. Interactive Gaming Interfaces: Some gaming interfaces use LED button lights to provide feedback and interaction.
  3. Customizable Options: Gamers can customize colors and patterns to suit their preferences.

Considerations for Choosing Gaming LED Button Lights

  1. Compatibility: Ensure the chosen LED button lights are compatible with your gaming system or console.
  2. Aesthetic Appeal: Consider the visual impact and how the LED buttons complement the overall gaming setup.
  3. Quality and Durability: Gaming environments can be intense; choose quality products that can withstand prolonged use.

Installation and Customization

  1. Professional Assistance: If necessary, seek professional assistance for installation or customization.
  2. DIY Options: Some gamers prefer DIY options, utilizing products like LED illuminated push button switch with wire for unique setups.
  3. Tutorials and Guides: Look for online tutorials and guides if you plan to set up the system yourself.

Step 20 – Understanding the Warranty and Support for Push Button LED Lights

Importance of Warranty

Warranty plays a significant role in the purchase of electrical components like push button LED lights. It offers a safety net against defects and malfunctions.

What to Look for in Warranty Terms

  1. Duration: Check the warranty duration, usually ranging from 1 to 5 years.
  2. Coverage: Understand what is covered under the warranty, such as parts, labor, etc.
  3. Claim Process: Familiarize yourself with the process of making a warranty claim if needed.

After-Sale Support

  1. Customer Service: Consider brands that offer reliable customer service and support.
  2. Online Resources: Look for online resources, guides, and tutorials for troubleshooting and support.
  3. Service Centers: Evaluate the availability of service centers or authorized repair shops near your location.

Push button LED lights have transcended from being mere functional devices to versatile components in various fields, from automotive to smart homes, gaming to industrial applications. Understanding the diverse aspects, specifications, selection criteria, usage scenarios, safety measures, and support can help in making informed decisions. Explore the world of push button LED lights, and discover how these simple yet powerful devices can transform and enhance various aspects of daily life and specialized applications.

Step 21 – Installation Guidelines for Push Button LED Lights

Preparing for Installation

Before installing your LED button lights, it’s essential to understand the specific requirements, including voltage, compatibility, and the desired location for installation.

Tools and Materials Needed

  1. Screwdrivers: Necessary for mounting and securing the push button LED lights.
  2. Wire Strippers: Useful for preparing wiring connections.
  3. Multimeter: To measure voltage and ensure proper connections.

Step-by-Step Installation Guide

  1. Switch off Power: Always turn off the power to the area where you will be working to ensure safety.
  2. Prepare Wires: Strip the wires if needed, using wire strippers.
  3. Connect Wires: Follow the wiring diagram provided with the LED button lights.
  4. Mount the Button: Secure the push button LED light in the desired location.
  5. Test the Connection: Turn the power back on and test the button to ensure it is working as intended.

Safety Precautions

  1. Follow Instructions: Always follow the manufacturer’s instructions provided with the push button LED lights.
  2. Use Proper Tools: Utilize the appropriate tools to prevent damage or injury.
  3. Seek Professional Help if Needed: If the installation seems complex, don’t hesitate to contact a professional electrician.

Customized Installation

For specialized or customized installations like the 19mm momentary push button lamp switch, additional considerations and expert assistance might be required.

Step 22 – Understanding the Environmental Impact of Push Button LED Lights

Energy Efficiency

LED button lights are known for their energy efficiency, consuming less power compared to traditional lighting options. This leads to reduced energy costs and a lower carbon footprint.

Longevity and Durability

The extended lifespan of push button LED lights minimizes waste, as they need to be replaced less frequently. High-quality products like LED push button switch are designed for durability.

Recyclable Materials

Some manufacturers are producing LED button lights with recyclable materials, contributing to a more sustainable approach.

Considerations for Environmental Impact

  1. Choosing Energy-Efficient Models: Look for LED button lights that are specifically designed for energy efficiency.
  2. Responsible Disposal: Dispose of old or non-functional LED button lights according to local regulations to minimize environmental harm.

Step 23 – The Importance of Quality Certifications for Push Button LED Lights

Significance of Quality Certifications

Quality certifications are indicators of compliance with international standards. They demonstrate the reliability, safety, and quality of the push button LED lights.

Common Quality Certifications

  1. CE Mark: A mandatory certification for products sold within the European Economic Area.
  2. RoHS Compliance: Ensures the product is free from harmful substances.
  3. UL Certification: A safety certification widely recognized in the USA.

How to Check for Certifications

  1. Check Product Packaging: Most certified products will display the certification logo on the packaging or product itself.
  2. Verify with the Manufacturer: Contact the manufacturer or refer to their official website to verify certifications.
  3. Consult Online Resources: Websites like Indicator Light often provide detailed information about product certifications.

Step 24 – Troubleshooting Common Problems with Push Button LED Lights

Identifying Common Problems

  1. Flickering Lights: This may indicate a voltage issue or a loose connection.
  2. Non-Functional Button: A broken or faulty switch may cause the button not to function.
  3. Dim Light: This could be due to a low battery in battery-operated models like small LED push lights.

Troubleshooting Steps

  1. Check Connections: Ensure all wiring connections are secure.
  2. Replace Faulty Components: If a component such as a switch is faulty, it may need to be replaced.
  3. Adjust Voltage if Necessary: Voltage issues can often be resolved by adjusting the power source or using a compatible adapter.

When to Seek Professional Help

  1. Complex Issues: If the problem persists after basic troubleshooting, it may require professional attention.
  2. Safety Concerns: If you are unsure about handling electrical components, it’s always best to consult a professional electrician.

Step 25 – Conclusion: Push Button LED Lights in Modern Applications

Push button LED lights have become an integral part of various applications, from home automation to industrial machinery, vehicles to gaming systems. Their versatility, energy efficiency, aesthetic appeal, and functional capabilities make them an essential component in today’s technologically advanced world.

Understanding different aspects, such as types, specifications, installation guidelines, environmental considerations, quality certifications, and troubleshooting, provides a comprehensive view of these innovative devices. By embracing the modern advancements in push button LED lights and considering the options such as lighted push button switch, individuals and industries can leverage these tools to create effective, efficient, and visually appealing solutions.

With proper selection, installation, and maintenance, push button LED lights can offer long-lasting benefits, contributing to sustainability, functionality, and a heightened user experience across a wide array of domains.

(Note: The article is now complete.)

Push Button LED Lights Pricing in the USA

When it comes to push button LED lights, the price can vary depending on factors such as the specific model, brand, and features. In this article, we will explore the price ranges of push button LED lights from different suppliers in the USA. So, let’s dive in and discover how much these lights cost!

Price Distribution of Push Button LED Lights

To get a better understanding of the average price range, let’s take a look at the pie chart below:

Price Distribution of Push Button LED Lights

As you can see, there are three major suppliers of push button LED lights in the USA: Home Depot, Walmart, and Made-in-China. Each supplier offers a different price range for these lights.

Push Button LED Lights Pricing by Supplier

Home Depot

At Home Depot, you can find a wide selection of push button light switches. The average price range for these switches is $10 to $4001. Home Depot carries reputable brands like Lutron, ensuring quality and reliability.


Walmart also offers a variety of LED push button lights. The price range for these lights at Walmart is quite affordable, ranging from $6.29 to $12.062. With competitive pricing, Walmart provides options for budget-conscious buyers.


For those looking for more budget-friendly options, Made-in-China is a supplier worth considering. The price for each push button switch can range from as low as $0.01 to $100, depending on the specific parameters and features3. Made-in-China provides a wide range of options at various price points.

Factors Affecting Push Button LED Lights Pricing

It’s important to note that the prices mentioned above are approximate and can vary depending on the supplier, retailer, and location. Several factors can influence the pricing of push button LED lights, including:

  1. Model and Brand: Different models and brands may have varying price ranges based on their features, quality, and reputation.
  2. Features: Push button LED lights with advanced features such as dimming capabilities or motion sensors may be priced higher than basic models.
  3. Supplier and Retailer: Prices can vary between suppliers and retailers due to factors such as overhead costs, distribution channels, and marketing strategies.
  4. Location: Prices may differ slightly based on the geographical location of the store or supplier.


In conclusion, the price of push button LED lights in the USA can range from affordable options at Walmart to higher-end choices at Home Depot. Made-in-China offers a wide range of options at various price points, catering to different budgets. However, it’s essential to keep in mind that prices can vary depending on factors such as the model, brand, features, supplier, retailer, and location.

When considering purchasing push button LED lights, it’s always recommended to check with the specific supplier or retailer for the most accurate and up-to-date pricing information. By doing so, you can make an informed decision and find the perfect push button LED lights that meet your needs and budget.

Remember, the right push button LED lights can not only enhance the aesthetics of your space but also provide efficient and energy-saving lighting solutions. So, go ahead and explore the market to find the perfect push button LED lights for your home or business!


Supplier Price Range Average Price
Home Depot $10 – $400 $205
Walmart $6.29 – $12.06 $9.175
Made-in-China $0.01 – $100 $50.005


The flowchart below illustrates the process of how push button LED lights are priced in different stores:

Push Button LED Lights Pricing Flowchart

Remember, when it comes to SEO, it’s crucial to optimize your content for search engines. By incorporating the core keywords “push button LED lights price” throughout the article, using appropriate headings, and following SEO rules, you can increase the visibility of your content and reach a wider audience.

Inquiry Now