Product Category


8MM Custom Short 110V IP67 Oven Indicator Light

8mm flat head 12v indicator light

8MM Custom Short 110v Ip67 Oven Indicator Light Product Introduction


We all know that in kitchen equipment, such as ovens and microwave ovens, in addition to knobs and temperature controllers, an oven indicator light is also used.

So, can our indicator light be used on the oven?

The answer is that we can provide a high-temperature oven indicator light. Moreover, the oven indicator light must be super high, and many customers use the indicator light as an oven light. We are a manufacturer specializing in the production and sales of oven indicator lights and switches, with more than 20 years of experience, and have CE, RoHS, and UL certifications.

The operating temperature range of our conventional indicator light is -40℃~80℃, and it cannot withstand high temperatures. However, we can customize high temperature resistant materials to meet the temperature resistance standard of oven indicator light.

The following one can be used as an oven indicator light. The most distinctive design of this 8MM Custom Short 110v Ip67 oven Indicator Light is the head plastic prismatic design, which can amplify the brightness of the LED and also flash the LED light. It shines on the oven button very brightly and acts as a light.

Its installation aperture is 8mm, which is suitable for small kitchen appliances such as ovens and microwaves. The thread installation method of the oven indicator light is very simple. The lamp bead of the oven indicator light is LED, which is a bidirectional super bright LED with no positive and negative poles. It has a long service life. The colors of the LED are red, yellow, green, blue, and white to meet the needs of different functions.

The base material of this oven indicator light: PA66 nylon, high strength, high yield strength, rigidity, still high strength, toughness, rigidity and low coefficient of friction in a higher temperature environment, oil and many chemical reagents and Solvent, good abrasion resistance.

The tail of this oven indicator light is directly wired. Teflon wire is conventionally used. Compared with PVC wire, it is harder and more resistant to high temperatures. The temperature can reach 260℃, which can fully meet the standard of oven indicator light. Use in the oven and microwave.


In addition to high temperature resistant indicators, we can also provide waterproof indicators.


If you are interested, please feel free to contact us at, we will reply to you as soon as we receive your inquiry.


Thank you for watching and wish you all the best.


Popular categories: metal indicator lights, metal push button

Product Item FL1M-8FW-2
Panel Mount Diameter 8mm
Contact Way With wire
Install Way screw terminal
Lamp Type LED
Rated voltage AC/DC,3V、6V、12V、24V、220V
Lamp Color red yellow blue green white
Product Design concave head
Shell Material brass plated nickel/stainless steel
Base Material PA66 nylon
Terminal Material brass
Applications Coffee machine, kitchen equipment, household appliances,    automobiles, medical equipment, industrial equipment etc

Understanding the Oven Indicator Light: A Comprehensive Guide

When it comes to your kitchen’s essential appliances, the Oven Indicator Light plays a vital role in not just signaling the device’s status but also guiding your cooking process. This article unravels everything you need to know about the oven indicator lights, including the issues related to specific brands like Wolf and Frigidaire ovens, such as the preheat light problems, blinking lights, and long heating times. From understanding the importance of the blinking light to troubleshooting the heating issues, the article provides insights and solutions to common oven indicator light problems, thereby enhancing your cooking experience. Whether you’re a culinary enthusiast or a professional chef, this guide to Oven Indicator Light offers valuable insights that you wouldn’t want to miss!

The Top 10 Most Asked Questions About Oven Indicator Lights

  1. What is the function of an oven indicator light, and how does it work?
  2. How can I troubleshoot issues with my Wolf oven preheat light?
  3. What should I do if my Frigidaire oven preheat light is not working properly?
  4. Why is my oven indicator light blinking, and how can I fix it?
  5. What could be the reason my Wolf oven light is blinking?
  6. Why does my Wolf oven take a long time to heat up, and how is the indicator light related to this issue?
  7. What are the specifications and usage of 8mm 110V oven indicator lights?
  8. How can I replace the cooking stove’s small indicator lights?
  9. How to choose the correct 12mm freezer 12-volt DC indicator lights?
  10. What are the common problems with 8mm 120V panel mount indicator lights, and how to resolve them?

What is the Function of an Oven Indicator Light, and How Does it Work?

Understanding the Oven Indicator Light

The oven indicator light is a vital part of modern ovens, signaling the status of the heating process. It allows users to monitor whether the oven is in the preheat stage, has reached the desired temperature, or if there’s a malfunction. These lights come in various specifications like 8mm 120V panel mount indicator lights, suitable for different types of ovens.

Functionality of the Indicator Light

Oven indicator lights typically have three main functions:

  1. Preheating Indication: Signaling that the oven is currently preheating.
  2. Temperature Reach Indication: Informing that the desired temperature has been achieved.
  3. Malfunction Indication: Warning of a technical problem within the oven system.

Working Mechanism of the Indicator Light

The oven indicator light operates through an intricate network of sensors and electronic circuits. When the oven starts heating, the sensor detects the temperature, and the indicator light turns on, usually in a specific color such as red.

Variations and Specifications

There are various types of oven indicator lights, such as the 8mm custom 110V IP67 oven indicator light, each designed for specific applications. They come in different voltages, sizes, and colors to match different oven designs.

Importance of the Indicator Light in Cooking

Oven indicator lights play a critical role in cooking by providing information about the oven’s status. Without them, it would be challenging to determine whether the oven has preheated to the right temperature or if there’s a malfunction.

The Connection with Safety Measures

In addition to helping with cooking, oven indicator lights contribute to safety by indicating if the oven is still hot or has an issue that needs immediate attention. This minimizes risks such as burns or potential electrical problems.

Choosing the Right Oven Indicator Light

Selecting the right oven indicator light depends on your oven’s model and requirements. Different options, such as the 8mm cooking stove small indicator lights, are available for different types of stoves and ovens.

Maintenance and Troubleshooting

Regular maintenance and proper understanding of the oven indicator light can prevent potential issues. If any problem arises, it’s essential to troubleshoot or seek professional help to ensure that the oven is functioning correctly.

Environmental Considerations

Modern oven indicator lights are designed to be energy-efficient and environmentally friendly. They consume minimal power and can be an essential part of a green kitchen.

Economic Aspects

Investing in high-quality oven indicator lights, like the 12mm metal audio equipment 220V white indicator light, can be cost-effective in the long run. They are durable and can withstand regular usage, thereby reducing the need for frequent replacements.

How Can I Troubleshoot Issues with My Wolf Oven Preheat Light?

Understanding the Wolf Oven Preheat Light

Wolf ovens are known for their quality and innovative features, including the preheat indicator light. This light indicates when the oven has reached the desired temperature for cooking. However, like any other electronic device, it might face issues that require troubleshooting.

Common Issues with Wolf Oven Preheat Light

  1. Blinking Light: The preheat light blinking can be a signal for a specific problem.
  2. No Light: If the light doesn’t turn on, it might indicate a malfunctioning sensor.
  3. Constant Light: If the light stays on even after preheating, it may imply a connectivity issue.

Step-by-Step Troubleshooting Guide

  1. Check the Power Supply: Ensure that the oven is properly plugged in and the power supply is stable.
  2. Inspect the Bulb: If the Wolf oven preheat light isn’t functioning, it might be due to a burnt-out bulb. Replacing it might solve the problem.
  3. Examine the Sensor: A malfunctioning sensor could cause the light to blink or not turn on at all. Check the sensor for any visible damages or inconsistencies.
  4. Consult the Manual: Refer to the Wolf oven’s user manual for specific instructions on troubleshooting the preheat light.
  5. Seek Professional Help: If the problem persists, it may be wise to call in a professional technician.

When to Call a Technician

While basic troubleshooting can be done at home, complex issues with the Wolf oven light blinking or other related problems might require professional assistance. If the issue is not resolved through basic troubleshooting, it’s advised to call a technician.

Replacing the Wolf Oven Preheat Light

Replacing the Wolf oven preheat light might be necessary if the bulb is burnt out or damaged. Make sure to use compatible parts such as 8mm red flashing LED indicator lights.

Maintenance Tips for Wolf Oven Preheat Light

  1. Regular Inspection: Regularly inspect the Wolf oven preheat light to catch issues early.
  2. Clean Properly: Keeping the oven and its components clean can prevent many problems.
  3. Follow Manufacturer Guidelines: Adhering to the manufacturer’s guidelines ensures the longevity of the oven and its components, including the preheat light.

Wolf Oven Warranty and Support

If your Wolf oven is still under warranty, make sure to contact Wolf’s customer support for any issues related to the preheat light. This might include free repairs or replacements as per the terms of the warranty.

Economic Considerations

Investing in high-quality parts and regular maintenance can save costs in the long run. Consider using products like 10mm 24V IP67 convex head FILN metal pilot indicator lights for replacements, as they might offer better durability.

Impact on Cooking Experience

Proper functioning of the Wolf oven preheat light is vital for an optimal cooking experience. It ensures that you are aware of the oven’s status and can cook your dishes to perfection.

What Should I Do if My Frigidaire Oven Preheat Light is Not Working Properly?

Overview of Frigidaire Oven Preheat Light

Frigidaire ovens are popular for their reliability and advanced features. The preheat light is essential in providing information about the oven’s temperature status. However, issues might arise that require attention and possible fixes.

Identifying the Issue with Frigidaire Oven Preheat Light

Common problems with Frigidaire oven preheat lights may include:

  1. Constantly On: If the light stays on even after the preheating phase, it may indicate an internal error.
  2. No Light at All: Failure to illuminate might signify a burnt-out bulb or a faulty connection.
  3. Flickering or Blinking: These symptoms could imply issues with the electrical wiring or a failing sensor.


8MM Custom Short 110V IP67 Oven Indicator Light

Troubleshooting Steps for Frigidaire Oven Preheat Light

  1. Consult the Manual: The user manual may have specific guidance for addressing issues with the preheat light.
  2. Inspect the Bulb and Connections: Ensure that the bulb is functional and the connections are secure.
  3. Reset the Oven: Sometimes, resetting the oven by unplugging it for a few minutes may resolve minor glitches.
  4. Check the Sensors: The temperature sensors should be examined for any visible damage or malfunction.
  5. Use the Right Indicator Light: Utilize proper indicator lights like the 8mm auto 12V mini LED indicator lights for replacements if needed.

When to Seek Professional Help

If the troubleshooting steps don’t resolve the issue, it might be time to call a certified technician. Complex electrical issues should not be handled without professional knowledge and tools.

Importance of Using Genuine Parts

When replacing the preheat light, it’s crucial to use genuine or compatible parts. This ensures optimal performance and maintains the oven’s warranty, if applicable.

The Impact of Frigidaire Oven Preheat Light on Cooking

The Frigidaire oven preheat light significantly influences the cooking process by providing vital information on when the oven is ready for baking or roasting. Any issues with it might lead to undercooked or overcooked meals.

Regular Maintenance for Longevity

Regular cleaning and inspection can prevent most issues with the Frigidaire oven preheat light. Following the manufacturer’s guidelines for maintenance ensures a longer lifespan for the appliance.

Economic Considerations

Investing in quality replacements and regular maintenance can minimize future repair costs. Quality indicator lights like the 10mm 120V LED AC power indicator light might be a wise choice.

Sustainability and Environmental Concerns

Choosing energy-efficient indicator lights and maintaining the oven properly not only saves on electricity bills but also contributes to a more sustainable and environmentally friendly kitchen.

Why is My Oven Indicator Light Blinking, and How Can I Fix It?

Understanding the Blinking Oven Indicator Light

A blinking oven indicator light may be a cause for concern or a standard signal depending on the oven’s model. Understanding what the blinking signifies is the first step in resolving the issue.

Common Reasons for Blinking Oven Indicator Light

  1. Error Message: The blinking might be an error message, signaling a specific problem within the oven.
  2. Normal Functioning: Some ovens use blinking lights to indicate normal processes like preheating.
  3. Electrical Issues: Loose connections or faulty wiring might cause the oven indicator light to blink.

Step-by-Step Guide to Fixing the Blinking Light

  1. Read the Manual: Consult the user manual to determine if the blinking is a standard feature or a sign of a problem.
  2. Inspect the Wiring: Look for any loose connections or damaged wires that might be causing the blinking.
  3. Check the Bulb: Sometimes, the issue might be with the bulb itself. Consider replacing it with suitable parts like the 8mm 12V vending blue LED indicator light.
  4. Reset the Oven: Unplugging and restarting the oven might solve minor issues causing the blinking.
  5. Call a Technician: If the problem persists, seeking professional help may be necessary.

The Role of Blinking Oven Indicator Lights in Cooking

A blinking oven indicator light can have several implications on your cooking experience:

  1. Guidance in Cooking: In some ovens, blinking lights indicate specific cooking stages, guiding the user through the process.
  2. Potential Disturbance: If the blinking is a sign of malfunction, it may affect temperature regulation, leading to uneven cooking.
  3. Indication of Required Maintenance: Continuous blinking might signal that the oven needs immediate attention, which could save on costly repairs later.

Safety Precautions with Blinking Oven Indicator Lights

Safety should always be the priority when dealing with electrical appliances. If the blinking light indicates an error, immediate attention is needed to avoid potential hazards.

Modern Technology and Blinking Indicator Lights

With advancements in oven technology, blinking indicator lights are now used more intelligently to communicate various oven statuses. Understanding these signals can lead to a more efficient cooking experience.

Energy Efficiency Considerations

Choosing energy-efficient bulbs like 8mm 120V panel mount indicator light can reduce energy consumption and contribute to environmental conservation.

How to Handle a Wolf Oven Light Blinking Issue?

Introduction to Wolf Oven Light Blinking

Wolf ovens are known for their quality and sophisticated features. If you notice the Wolf oven light blinking, understanding its cause and knowing how to fix it is essential.

Common Causes of Wolf Oven Light Blinking

  1. Temperature Fluctuations: The blinking light may signal temperature changes or instability within the oven.
  2. Faulty Sensors: Damaged or malfunctioning sensors might cause the light to blink.
  3. Control Panel Errors: Sometimes, the issue might be related to the control panel or user interface.

Quick Solutions to Wolf Oven Light Blinking

  1. Check the User Guide: Consult the user guide to understand the meaning of the blinking light specific to Wolf ovens.
  2. Inspect the Light Itself: The blinking might be a result of a faulty bulb, in which case it can be replaced with high-quality parts like 12mm metal audio equipment 220V white indicator light.
  3. Perform a Hard Reset: Unplugging the oven for some time and plugging it back in may clear minor glitches.
  4. Contact Customer Support: Wolf’s customer support can provide guidance tailored to your specific model.

Long-Term Maintenance of Wolf Oven Indicator Lights

Regular maintenance and using genuine or compatible parts ensure that the oven functions optimally, minimizing issues like blinking lights.

The Importance of Professional Assistance

If the problem persists, it is wise to seek professional assistance. Attempting complex repairs without proper knowledge might lead to further damage.

Considerations in Selecting Replacement Indicator Lights

Choosing the right replacement is essential. Options like 12mm metal flameproof 5V indicator light might be suitable for Wolf ovens, but consulting the user guide or professional advice is always recommended.

Impact on Cooking Experience

A blinking light in a Wolf oven may have diverse effects on cooking, from mere annoyance to an indication of vital information about the cooking process.

Wolf Ovens and Sustainable Practices

Investing in energy-efficient indicator lights and regular maintenance can contribute to environmental sustainability and energy savings.

Why Does My Wolf Oven Take a Long Time to Heat, and How to Fix It?

Understanding Wolf Oven Heating Issues

Wolf ovens, although renowned for their quality, may sometimes experience heating issues. If your Wolf oven takes a long time to heat, understanding why and how to fix it is crucial.

Oven Indicator Light Price Range in the USA

When it comes to finding the perfect oven indicator light, one of the first things that comes to mind is the price. Understanding the price range for oven indicator lights in the USA can help you make an informed decision. In this article, we will explore different sellers and sources to provide you with an approximate idea of how much an oven indicator light may cost.

To kickstart our search, let’s take a quick look at some popular sellers and sources:

Now, let’s delve deeper into the details and explore the price range for oven indicator lights from these sources.

Oven Indicator Light Price Details

Seller/Source Product Price
HouseofWebster Indicator Light Burners – Oven Starting from $11.70 USD
WebstaurantStore Vulcan 00-428900-000G3 Oven Indicator Light Not specified
OMCH Indicator Light Manufacturers in the USA Not specified (Over 300 types) 8MM Custom 110V IP67 Oven Indicator Light Not specified
Home Depot Hot Surface Indicator Light Electric Ranges Not specified GE WB25K10002 Range Indicator Light Not specified

Exploring the Price Range

HouseofWebster: Indicator Light Burners – Oven

  • Price range: Starting from $11.70 USD1

WebstaurantStore: Vulcan 00-428900-000G3 Oven Indicator Light

  • Price: Not specified2

OMCH: Indicator Light Manufacturers in the USA

  • Note: The company carries over 300 types of indicator lights/pilot lights at competitive prices, including oven indicator lights3. Specific pricing information is not provided. 8MM Custom 110V IP67 Oven Indicator Light

  • Price: Not specified4

Home Depot: Hot Surface Indicator Light Electric Ranges

  • Price range: Not specified5 GE WB25K10002 Range Indicator Light

  • Price: Not specified6

Please note that the prices mentioned above are approximate and may vary depending on the specific seller, quantity, and any additional features or specifications of the oven indicator lights. It is recommended to visit the respective websites or contact the sellers directly for accurate and up-to-date pricing information for oven indicator lights.


Understanding the price range for oven indicator lights in the USA can help you make an informed decision when purchasing one. From the affordable options available at HouseofWebster to the wide variety offered by OMCH, there are options to suit different budgets and requirements. Remember to consider factors such as quality, features, and customer reviews alongside the price to ensure you find the perfect oven indicator light for your needs.

Component name material
Lens PC plastic
Metal Body H59 brass or 304 stainless steel
Wahser T10 Cold Rolled Steel
Rubber Ring SIL silica gel
Nut H59 nickel plated brass
Housing PA66 nylon
Light Source LED
Resistor Metal film
Cable PTFE AWG22 0.3mm²
Plug-in C2680 RoHS brass
Items Parameter
Rated Voltage 3V-780V DC or AC
Rated Current 20mA
Rated Power 0.2W
Insulation and Voltage Resistance 1800V
Working Life 100000h
Electrical Life 100000
Cold-resistant -40℃
Heat-resisting 80℃
metal indicator light

Inquiry Now