Search

New 12MM Red Custom 12V Push Button Switches

  • Mode: FLPQ12-10FWM
  • Voltage: 3V, 6V, 12V, 110V, 220V, 380V
  • Keyword: 12V Push Button Switch
  • Current: 1A
  • Color: Black, White
  • Material: ABS plastic
  • Certification: CE, CCC, ROSH, IP54, UL
  • Waterproof grade: IP54
  • Wire specification: AGW22
  • Email: [email protected]
  • Download PDF: New 12MM red Custom 12V Push Button Switches

FLP12-10FWM (1)

12V push button switch parameters

Production Series FLPQ12-10FWM Light Guide Button
Button Shape round Actuator ABS plastic
Button LED Color Black、white Housing Sleeve ABS plastic
Mechanical Life The 500 thousand time Button Pin 22AWG PVC wire(0.3MM2)
Electrical Life The 100 thousand time Rubber Ring SIL silica gel
Protection Level IP65 IK08 Nut H59 nickel plated brass
Rated Voltage 36V(DC) 250(AC) Housing ABS plastic
Rated Current 1A(DC)0.5A(AC) Light Source
Rated Power 36W(DC)125W(AC) Resistor
Operating Temperature -25℃~+85℃ Contact AgCdO12

What is the 12V push button switch?

The product’s voltage is 12V, connect the machine and equipment. Press the button on the machine, the light will be on and the machine will start.

If the voltage is less than 12V, press the push button, the light will not be on, the machine will not start.

When the voltage is greater than 12V, the LED of the push button switch will be burned directly and the machine will not start.

Button switch control equipment

The description of the new 12mm red custom 12V push button switch.

Button customization

 

  1. The mounting aperture of the product is 12mm, in order to install the product, you only need to open the hole size about 12.2mm in the equipment panel.
  2. The head of the product can be customized with a variety of symbols and patterns, which can be produced into black and silver. When the push button switch is powered on, the customized symbol will glow, which is very beautiful.
  3. The voltage of the product is not only 12V, it can be customized with other voltages, such as 2V, 3V, 6V, 24V, 110V, 120V, 220V, 380V, etc..
  4. The product can achieve a variety of colors, such as red, green, yellow, blue, white, orange, etc. Which can be customized with two-color and three-color products according to customer’s demand.
  5. The current of the product is 10A and the power is below 250W, the service life is 100,000 times.
  6. The product adopts a direct lead wire design, so it is very convenient for wiring. The wire adopts Teflon material which high temperature resistance is 220V, which can be customized to connect different terminals according to customer’s demand.
  7. The plastic material of the product is nylon PA66, which high temperature resistance is up to 120 degrees. The push button switch can be used between minus 40 degrees and 80 degrees.
  8. The waterproof rating of the product is IP40, It can be customized with waterproof 12V push button switch according to customer’s demand, which waterproof rating is IP65.

How does the 4 pin 12V push button switch work?

The product has two functions of self-locked and self-reset.

  1. The self-locked 12V push button switch means that the voltage is 12V, press the push button switch, it does not return automatically. You need to press the button again to return it to the original position.
  2. The self-reset product means that the voltage is 12V, press the push button, the machine starts work when it is powered on. When the handle is released, the button will automatically return to the original position, the machine does not work.

How to connect the wire with the 12v push button switch with LED?

The product is installed on the control panel and connected with 12V voltage. When press the 12V push button switch, the equipment will start and the light is on. Press the switch again, the equipment will be turned off directly.

The positive pole wire of the device is connected with the switch load pin, the other load pin is connected with the LED light wire of the product and the device’s positive pole. The device’s negative pole and the negative pole of the product’s LED pin. Please refer to the picture description.

push button switch wiring

How to make the 12V push button switch?

The 12V push button switch consists of 16 accessories.

1. The head is automatic assembly by automatic equipment, mass production using automation that can reduce costs and improve efficiency.

2. Put the button’s head on the base of the wire, installing the LED, place it on the fixture to press down on the head and base.

3. Put the installed product on the test bench for power and LED test.

4. Put the tested product with lamp in the box, and pack 100 pieces in a box.

Waterproof button inside

How to install 12v push button switch?

The product has two installation mode, thread style and buckle style.

The thread style product adopts screw fixation mode. Put the push button switch on the panel, then put a waterproof ring under the panel, and screw the copper nut to tighten it.

The buckle style product’s installation is very convenient. The product’s appearance design with two ears at both sides, which can fix 0.5mm to 3mm panel. Simple place the button in the hole of the 12.2mm mounting panel, which design can reduces the installer’s time.

New 12MM Red Custom 12V Push Button Switches

How to purchase the 12V push button switch?

A free sample

If you are a factory and the purchase volume is large, no matter you want to a favorable price or you need to customize push button switch.

You can email to us, we will provide samples free of charge for your test, our email address is [email protected]

Your purchase quantity is small and the time is urgent, you can place order at www.cnfiln.com, we will arrange the delivery at the same day.

The LED supplier

The push button switch of Filn had passed the certifications of UL, CE, ROSH, ISO90001, which can ensure the product’s quality. Filn not only produce push button switch, but also indicators, rocker switches, microswitches, smart touch switches etc.

If you have any questions about the push button switch, please contact us immediately, we will give you a satisfactory reply, our email address is [email protected]

Quickly place an order online
Fill out my online form.