Table of Contents
22MM 12V Short Momentary Micro 4 Pin Push Button Switch
- Mode: FLM22-10FEJM
- Voltage: 36V (DC) 250V(AC)
- Current: 5A (DC) 5A (AC)
- Keyword: 4 Pin Push Button Switch
- Color: Red, Blue, Green, Yellow, White
- Material: Copper, Stainless steel
- Certification: CE, CCC, RoSH, IP67
- Waterproof grade: IP67
- Email: [email protected]
- Download PDF: 22MM 12V Water Proof Computer Thin Metal Contact Push Power Button Switch
4 pin push button switch parameters
| Production Series | FLM22-10FEJM | Light Guide Button | PC plastic |
| Button Shape | round | Actuator | 304 Stainless steel |
| Button LED Color | Red blue green yellow white | Housing Sleeve | H59 nickel plated brass/304Stainless steel |
| Mechanical Life | The 500 thousand time | Button Pin | H62 copper alloy |
| Electrical Life | The 100 thousand time | Rubber Ring | SIL silica gel |
| Protection Level | IP65 IK08 | Nut | H59 nickel plated brass |
| Rated Voltage | 36V（DC）250V(AC) | Housing | PA66+GF20% nylon |
| Rated Current | 1A（DC）5A(AC) | Light Source | LED |
| rated Power | 180W（DC）1250W(AC) | Resistor | Metal film |
| Operating temperature | -25℃~+85℃ | Contact | AgCdO12 |
The description of the 4 pin push button switch.
- The biggest feature of the product is that the length is very short and the size only has 12.1mm, which can be placed in a relatively narrow space.
- The mounting hole size of the product in the picture is 22mm, since the product’s size is particularly short, it can not be produced with a lock. This short type is specially customized for my customers. It can save space for the installation on the panel, the appearance is the atmosphere and very beautiful.
- The head shape of the product is flat-head.
- The metal material of the product is divided into brass, stainless steel, zinc alloy. The cost of the brass is very low, the stainless steel has corrosion resistance, and the appearance of the zinc alloy can be plated into different colors, however, it has the MOQ requirement if you want the customization. The conventional material is stainless steel or brass.
- The product can achieve 5 colors, such as red, yellow, blue, green, white. Currently, the product only can achieve the function of 1NO with single unit, the product is monochrome and has 4 pins, 2 is switch pins and 2 is light pins.
- The current of the product is 0.5A / 250V AC, it can be used on the appliance, which power is under 100W.
- The product has a variety of voltages, such as 3V,6V, 12V, 24V, 110V, 220V etc.
- The mechanical life of the product is 100,000 times, and the warranty is 5 years, Filn will replace the problem products free of charge during the warranty period.
- The product had passed the certifications of CE, ROSH, UL, etc., which can proved that the product meets international standards.
- The waterproof rating of the product is IP67, which can be used outdoor.
- Various wires and terminals can be customized according to customer’s requirements.
How to connect the 4 pin push button switch?
The wiring of the product is very simple, which has 4 pins.
The use method is the same as our 16mm, 19mm short type 4 pin metal push button. The 4 pins 1NO push button switch has two wiring modes.
You can save this image and test it. The wiring mode is very simple, you need to know that the product has 4 pins, 2 are switch pins, 2 are light pins, and don’t need to distinguish the positive and negative pole.
The wiring method is as follows:
The wiring mode 1
The switch closed to the light wire is connected to a line, then connect to the device. The other line of the device is connected to the lamp line and power line. The power’s another line is connected to the switch’s another pin. When press down the push button, the device starts to work and the product’s light will be on. While releasing your hand, the light and device will be switched off.
The wiring mode 2
The switch pin and light pin are connected to one pole of the power, the other pole of the power is connected to the another LED’s pin and device.
Through this connection way, the product’s light will be on all the time, when you press down the switch, the device starts to work.
The advantage of the 4 pin push button switch produced by Filn?
Filn is a professional manufacturer of 4 pins push button switch, indicator light and signal light. Its products are widely used in machinery, power, automation and other industries.
It is the first choice for middle and high-end users in China, with 12 years of production experience, with advanced and perfect production equipment, test equipment and inspection instrument (pressure resistance tester, current test instrument, waterproof test instrument, aging test instrument).
We established a characteristic quality assurance system in strict accordance with the requirement of the ISO9001 quality system, which can ensure the product’s production process and testing process are completely under the quality control.
Moreover, we also have a professional R&D team, with a total of 10 engineers, each product section has 2 or 3 engineers , who are dedicated to developing new products of LED push button switch, and supply customization service for customers.
Where to buy the 4 pin push button switch?
The product has no MOQ, whether you purchase 1 piece, 10 pieces, 100 pieces or thousands of large purchase, you can contact us, there are 2 purchase ways.
1. You can email us, and tell me the product’s color and voltage that you need, then we will send you the offer.
You can arrange the payment through PayPal, credit card or bank transfer. If you have any questions about us or need our products, want samples, etc., please contact us directly. Our email address is [email protected].
2. Online purchase way, we have a purchase shopping platform at www.cnfiln.com, you can place an order online directly.
Fill out my online form.