MTS-202 6 Pin 2 Way Round On-On Metal Toggle Switch

2.The characteristics of a on-on metal toggle switch

Color: The 2 way metal toggle switch toggle switch has a blue plastic casing, which makes it easy to identify and operate.

Rating: The maximum rating of the metal toggle switch is 6A at 125V AC, which means it can handle up to 6 amps of current when used with a 125V AC power source.

Contact type: The 6 pin toggle switch has DPDT (double pole double throw) 6-pin contacts, which means it has two sets of contacts that can each be connected to two different circuits.

Function: The round toggle switch has an ON/ON function, which means it has two positions that can be toggled between, with each position corresponding to a different circuit state.

Material: The on-on toggle switch is made of plastic and metal, which provides durability and protection.

Endurance: The round toggle switch has a mechanical life of over 50,000 cycles, which means it can be toggled back and forth up to 50,000 times before it starts to wear out. It also has an electrical life of over 10,000 cycles, which means the contacts can switch on and off up to 10,000 times before they start to degrade.

Installation: The switch has a mounting hole diameter of 6mm, which is the size of the hole that needs to be drilled in the panel or enclosure to mount the switch.

The contact resistance of the switch is less than 20 million ohms, which means that when the contacts are closed, the resistance is very low, helping to reduce power loss in the circuit.

The metal toggle switch has an operating temperature range of -30°C to +85°C, which means it can operate over a wide temperature range.

This metal toggle switch is a plug-in type and is fixed and connected to the circuit by friction and pressure through the holes on the circuit board. It has the characteristics of easy installation and reliable connection, and is suitable for occasions that require convenient installation, small size, and frequent connection.

The disadvantage of plug-in type is that the connection strength is relatively low and it is prone to loosening, which is not suitable for occasions that require high connection firmness.

In addition, since the plug-in type needs to be inserted into the hole, it cannot be directly fixed on the circuit board and needs to be fixed to the circuit board in other ways.

3.on-on metal toggle switch Advantages

It is suitable for both low voltage and high voltage circuits, and can be used to switch lights and motors.

High-quality nut: The hexagonal nut is of equal length, rotates smoothly, and is easier to tighten.

Clear threads: The threads are precision machined, resulting in a more exquisite appearance.

2-way round: The switch can be toggled between two positions, providing a convenient ON/ON function.

Mechanical life: Over 50,000 cycles.

6 terminals: The metal toggle switch is made of high-quality industrial materials and has 6 terminals that are easy to solder, providing reliable connections and durability.

4.1The components of the on-on metal toggle switch

Casing: Made of metal, it protects the internal components, increases mechanical strength and durability.

Rocker: Made of metal, it completes the circuit connection and disconnection through manual toggling.

Contacts: Made of silver metal, they are used for connecting and disconnecting circuits.

Springs: Typically made of metal, they are used to control the connection and disconnection of contacts.

Fixtures: Typically made of plastic or metal, they are used to fix the switch’s rocker and contacts.

Terminals: Typically made of metal, they are used to connect the switch to the circuit.

4.2Accessories

Waterproof cap:

A small plastic or rubber cap used to protect electronic components from water, dust, corrosion, and other environmental factors. It is usually placed on the component terminals to protect them from external damage.

Protective cover:

It is usually a cover-like component installed on toggle switches to cover the operating parts of the switch, providing protection and preventing damage caused by external objects. The design of the protective cover typically takes into consideration the size, shape, and operating method of the switch, ensuring that the protective cover can tightly cover the operating parts of the switch and perfectly match the switch itself.

5.Circuit diagram of the on-on metal toggle switch

Find a row of parallel 3-pin metal toggle switch.

Connect the negative terminal of the power supply to the common pin, and connect one line of each device to the left and right sides of the switch respectively.

Connect the remaining line of each device to the positive terminal of the power supply.

Repeat the above steps for the other row of pins.

As a result, one device will work on each side of the switch when the switch is toggled to the left, and the previously working devices will stop working while the other two devices start working when the switch is toggled to the right.

It can be observed that the switch manages two circuits and has no middle OFF position, only ON-ON, with the pins in the same vertical row connected in series, and the pins in the same horizontal row connected in parallel.

When choosing a on-on toggle switch, it is important to consider the instantaneous current under different currents:

In the case of direct current, the instantaneous current will be more than 3 times the normal circuit current. Generally, it is multiplied by 3.5 to calculate the instantaneous current to prevent switch damage. The current rating of the switch should be selected based on the calculation of the machine’s power, which is equal to the voltage multiplied by the current, according to P=UI.

6.Range

The MTS-202 toggle switch is a durable and reliable metal toggle switch that can be used for various applications, such as consumer electronic products. Its mechanical life of 50,000 cycles allows it to be used for a long time, making it very suitable for applications that require high reliability and durability, such as automotive, appliances, industrial controls, etc. It can also be used to control lights, motors, fans, sensors, audio signals, and other circuits. Its metal casing and high current rating make it suitable for use in harsh environments where other types of switches may not be able to withstand the conditions.