Contacts us: inquiry@cnylin.com.cn

Search

3 Way 12 Volt Red LED Round illuminated Red Power Switch

Red power switch parameters

Product Item KCD1-1211-11_012BR
Panel Mount Diameter 19.5*19.5mm
Contact Way solder pin
Install Way Buckle
Lamp Type LED
Rated voltage 3v, 5v, 6v, 12v, 24v,13v, 110v, 120v, 220v, 240v, 250v, 380v
Lamp Color Red,white,blue,green,black,yellow
Shell Material brass plated nickel
Base Material PA66 nylon
Terminal Material brass
Applications Coffee machine, kitchen equipment, household appliances, automobiles, medical equipment, industrial equipment etc
Current 5A

The advantage of the red power switch produced by Filn is waterproof, it can be used outdoors and where rain comes in.

The detailed description of the 3 way 12 volt red LED round illuminated rocker light switch.

1. The mounting hole size:

The mounting hole size of the 12V lighted rocker switch is 19.5mm, and its installation way is direct card buckle, you just need to open the hole of 20mm on the rocker switch panel.

Please note that the thick of the panel is between 0.8mm-2mm. Position the round rocker light switch at the mounting port of the rocker switch panel, plastic pieces on both sides of the rocker light switch get stuck on the boat switch panel.

The rocker switch is fixed, and installation is very convenient.

Rocker Light Switch aperture

2. Waterproof:

The red power switch is designed with waterproof, the waterproof rating is IP67, put the transparency cover of the rocker switch and the waterproof cap of the lighted rocker switch on the lamp seat of the rocker switch, waterproof cap make the product sealed.

The material of the waterproof cap is silicone material, it is waterproof and oil-resistant, it can be used on the kitchen equipment in a lampblack environment.

3. Current:

The current of the illuminated rocker light switch is 5A, under the voltage of 250V, it can be used on the mechanical equipment of which power is below 1000W.

If you want to the 10A rocker switch, you can change the material from brass to purple brass(⑨⑩⑦), then change the size of the contact silver points from 2.5mm to 3.5mm.

4. Voltage:

Through changing the resistance of the small rocker light switch to customize a variety of different voltages, such as 3V, 6V, 12V, 24V, 110V, 120V, 220V, 250V, etc. Among these, the 12V voltage rocker light switch is the most commonly used.

5. Color:

The illuminant body inside the old rocker switch is LED, it can achieve five colors of red, green, yellow, blue, white, if you need a black rocker switch, that is the rocker switch without the lights, the surface is black and does not shine.

6. Service life:

The service life of the marine lighted rocker switch is 100000 times at a power level of 1000W. If the power level is higher than 1000W, the service life becomes shorter, while under 500W, the service life becomes longer.

Inside the rocker switch

7. Certification:

The waterproof rocker switch of Filn had passed the certifications of UL, CE, ROSH.

They can prove that the functions of product meet the international standards, ensuring the quality of the 3 way rocker light switch, it can be sold and used in the US and European markets.

certificate

8. Material:

The head of the lighted 3 way rocker switch adopts the nylon PC material, the lamp seat and base are of nylon PA66 material, it is a flame-retardant and high-temperature-resistant material.

This can prevent the circumstance that welding of wires and lamp feet caused the rocker switch’s base to melt. The waterproof cap is made of silicone material, the rocker switch’s metal pin adopts the copper H62 material.

9. Function:

The marine red power switch has the functions of ON-OFF and reset ON-OFF.

How do you wire a red power switch?

Firstly, connect the pin’s one end of the red power switch to the power, the other side’s pin of the rocker switch is connected to the device’s one end, then the one end of the device is connected to the power, it is the way of series connection.

When the device is energized, press the tab “o” on the lighted rocker switch, then confirm the LED light of the rocker switch is on or off.

Then confirm if the device is starting or not. If the device starts up means the connection was successful.

What is a red power switch?

Rocker light switch means the rocker switch is with lamp, the light is on when the rocker switch is on, we can judge the state of the rocker switch by lighting the light.

How does a rocker switch work?

The rocker switch is divided into illuminated rocker switch and rocker switch without lamp. The illuminated rocker switch is installed on the device’s panel, controlling the machine’s startup and disconnection.

When the machine is energized, press down the power, the rocker switch’s light is on, or you press the tab “o” of the illuminated rocker switch, the lamp inside the rocker switch is on, it means that the rocker switch is energized, the machine and equipment are powered up normally, and the machine can start safely.

Press the tab “-” on the surface of the rocker switch, the light is off inside the rocker switch, which means the machine and equipment have been disconnected.

The rocker switch without a lamp means it has no light-on function, it can only have the function as one switch.

How to buy a red power switch?

filn sales-team

The red power switch has many voltages, such as 12V rocker light switch, 120V rocker light switch, etc.

You can email us directly, please indicate the information of voltage, current, color, and usage environment.

We can recommend the most suitable rocker switch to you, our email address is inquiry@cnylin.com.cn.

Free button samples

If you need the common rocker switch, such as KCD4 rocker switch, KCD1 waterproof rocker switch, you can click on this link www.cnfiln.com, you can place an order in our store, we will arrange the delivery within 24 hours.

What is the advantage of the rocker switch of Filn?

FILN has no MOQ

1. The rocker light switch of Filn has no MOQ, you can purchase from one piece, besides, the custom rocker switch has no MOQ, supposing you need one white 12 V rocker switch, Filn can produce.

Customized production of rocker switch

2. If you want the rocker switch with wire, Filn can supply the customized service, the wire can be welded directly on the rocker switch.

Rocker switch certification

3. The old rocker switch of Filn had passed the certifications of UL, CE, RoSH, and all the round rocker switches are produced according to the ISO90001 quality management system standards.

They can ensure the consistency of the product’s quality.

Development of a new rocker switch

4. The new rocker switch has fast development speed, Filn has a professional R&D design team and engineers for producing rocker switch grinders.

The design and mould development of the new rocker light switch are basically completed within 30-40 days.

Solve the problem of rocker switch

5. Reply to the problems about rocker switch in time, Filn’s sales staff are all sales engineers.

They can answer and solve any customer problems regarding the rocker switch in the shortest time.

Ship type switch overseas sales

6. Filn has 20 years of experience in producing rocker light switch, and also has a professional rocker switch R&D team, providing various rocker switch solutions for customers within 24 hours.

Filn also has more than ten years of overseas sales experience, and can communicate and solve international trade issues independently and timely, if you have any questions about the product, please contact us immediately, our email address is inquiry@cnylin.com.cn.

Fill out my online form.