Table of Contents
8 mm Pilot Guiding Signal LED Panel Indicator Lights 110V 12V/24VDC Plastic LED Indication Light
What are led panel indicator lights?
Led panel indicator lights to refer to equipment that uses light to monitor the operation or position status of circuits and electrical equipment.
LED panel indicator lights are usually used to reflect the working status of the circuit (live or uncharged), the working status of electrical equipment (running, stopping or testing) and position status (closed or disconnected).
Low-voltage power distribution devices are usually installed on the screen, On the panels of panels, tables, and cabinets, some low-voltage electrical equipment and meters are installed on panels or other prominent positions to reflect the working status of the equipment. Usually, when the light is on, it means that the device is powered; when the light is off, it means that the device is out of power.
FILN company mainly produces and sells LED and neon bulb led panel indicator lights.
The one introduced today is 8mmPilot Guiding Signal led panel indicator lights 110V 12V/24VDC plastic LED indication light
Its installation aperture is 8mm, the installation method is threaded, with a wire at the tail, and the conventional wire length is 20cm per wire.
We use LED lamp beads of good quality, so the positive and negative poles are not distinguished and can be connected arbitrarily.
Good LED lamp beads, its voltage range is very wide, 3v-220v, commonly used are 6v 12v 24v 110v 220v. There are mainly 5 colors of lamp beads, red, yellow, green, blue and white.
Material of component name
Shade: PC plastic
Metal shell: H59 brass or 204 stainless steel
Washer: T10 cold rolled steel plate
Rubber ring: SIL silicone
Nut: H59 nickel-plated brass
Base: PA66 nylon
Light source: led
Resistance: metal film resistor
Cable: PVC cable
The following is a brief introduction to LED panel indicator lights
1. How many installation methods are there for led panel indicator lights?
There are two ways to install the indicator light. One is the threaded type, where the indicator light is installed on the panel, and then the nut is screwed on.
One is the bayonet type, the indicator light is directly inserted into the mounting hole, which is quick and convenient.
2. How many kinds of LED panel indicator lights are there?
There are many types of indicator lights, such as convex head, female head, flat head, etc., and you can also customize the style according to your personal needs. For details, please refer to www.indicatorlight.com
3. How many materials are there for led panel indicator lights?
The indicator light is made of plastic and metal. The plastic indicator is cost-effective. The metal indicator has an explosion-proof function and high-end atmosphere and is basically used for high-end products. Metal indicator lights are made of copper, stainless steel and zinc alloy aluminum black.
Customers on the market usually use copper, stainless steel, especially 316 stainless steel. They are basically used in corrosive environments, such as seawater and Sulfuric acid site. The zinc alloy aluminum black type has a better appearance.
4. How many mounting holes do the LED panel indicator lights have?
The mounting holes are generally circular, with sizes of 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 19mm, etc., and 22mm and other indicators can also be installed with square holes.
5. How much voltage do the LED panel indicator lights have?
The voltage range is 3-220v. Commonly used voltages are 3v 5v 6v 12v 24v 36v48v110v120v220v250v380v.
6. How many kinds of LED colors do the LED panel indicator lights have?
LED colors are red, green, yellow, blue, white, and there are also customized ones such as purple
7. Are there two-color led panel indicator lights
Yes, the indicator lights are red, green, red and blue, blue and green, etc.
8. Are there three-color led panel indicator lights
Yes, the indicator lights also have three-color indicator lights such as red, green, blue, red, green, and yellow.
9. Is there any waterproof led panel indicator lights?
There are waterproof and non-waterproof indicators, and the waterproof indicators have IP67 and IP68 waterproof ratings. The waterproof indicator is provided with a professional organization’s test report.
10. What is the international standard voltage tolerance of led panel indicator lights?
The international voltage standard for plastic indicator lights is 2000V, the test time is 5 seconds, and the metal indicator lights are 1800V, and the test time is 5 seconds.
11. How many ways are there to connect to led panel indicator lights?
There are two connection methods: wire connection and terminal connection. The line length can be increased or decreased according to customer needs.
12. Why choose FILN’s led panel indicator lights?
FILN is a professional indicator light manufacturer with a relatively complete indicator light type on the market.
13. How old is this factory
FILN has 20 years of professional indicator manufacturing experience.
14. What is the certification of led panel indicator lights?
The FILN company indicator has passed the following international certifications: UL in the United States, VDE in Germany, CE in the European Union, RoHS in the European Union,
15. Can LED panel indicator lights be done according to my requirements?
FILN has a professional indicator light design team, which can quickly develop products according to customer needs.
16. How do you make money by selling led panel indicator lights?
FILN’s indicator lights are designed by the FILN indicator design team, and most of them have design patents. This is different from the products of other companies. If you sell FILN indicator products, I believe it will bring you a lot of money and high amount of profit.
17. Is there a minimum order quantity for led panel indicator lights? What is the minimum order quantity?
FILN company is a professional factory, and there is no minimum order quantity limit, so you can buy from one indicator light without worrying about the minimum order quantity.
18. How long is the warranty period of LED panel indicator lights?
The quality of the FILN indicator is very high. It has a 5-year shelf life. During this period, if there is a quality problem, it will be replaced for free.
19. Do you have heat-resistant led panel indicator lights?
The FILN indicator has a heat resistance of 180 °C, the plastic is made of 200 °C nylon PA66, and the wire is made of 200 °C silica gel.
20. Is there any flashing led panel indicator lights?
FILN can produce a single flashlight according to customer needs.
If you have any questions about our indicator light, please contact us at email@example.com.
Hot product: metal indicator light