Table of Contents
22MM 12v Waterproof Red LED Illuminated Push Button Switch
- Mode: FLM22-11FEJ
- Voltage: 3V, 6V, 12V, 24V, 110V, 120V, 220V, 380V
- Keyword: illuminated push button switch
- Current: 5A(DC) 5A(AC)
- Color: Red, Blue, Green, Yellow, White
- Material: Copper, Stainless Steel
- Certification: CE, CCC, ROSH, IP67, UL
- Waterproof grade: IP67
- Wire specification: AGW22
- Email: [email protected]
- Download PDF: 22MM 12V Waterproof Red LED Illuminated Push Button Switch
Illuminated push button switch parameters
|Production series||FLM22-11FEJ||Light guide button||PC plastic|
|Button Shape||round||Sctuator||304 Stainless steel|
|button LED Color||Red blue green yellow white||Housing Sleeve||H59 nickel plated brass/304Stainless steel|
|Mechanical Life||The 500 thousand time||Button Pin||H62 copper alloy|
|Electrical Life||The 100 thousand time||Rubber Ring||SIL silica gel|
|Protection Level||IP67 IK09||Nut||H59 nickel plated brass|
|Rated Voltage||36V（DC） 250V（AC）||Housing||PA66+GF20% nylon|
|Rated Current||1A（DC）0.5A（AC）||Light Source||LED|
|Rated Power||36W（DC）125W（AC）||Resistor||Metal film|
The description of the 22mm 12V waterproof red LED illuminated push button switch.
- The mounting hole size of the product is 22mm, if you want the product is waterproof on the panel, open the installation aperture of 22.2mm, then put the 12V illuminated push button switch on the installation hole, put a special waterproof ring on the back of the installation hole, tighten the metal cap of 22mm.
- The product has a variety of voltages, such as 2V, 12V, 24V, 110V, 120V, 220V, 380V.
- The product has single unit and double groups control, you can install two micro-movements under the product.
- The metal shell material of the product is divided into zinc alloy, stainless steel, brass.
- The stainless steel LED illuminated push button switch has the function of corrosion resistance, which can be used in the places that the environment is harsh. Such as seaside, kitchen equipment, and outdoor, etc.
- The metal shell of the brass product is beautiful after chrome treatment, with the concave shape of the metal shell. After the LED lights are light up, his whole shell is reflected in light, it is more beautiful and gorgeous, usually used in household wine cabinet, ice making and household appliances.
- The zinc alloy product has the advantage that the metal appearance can be plated in a variety of colors, such as red, green and black, etc. After plating, the appearance of the whole push button is with color, which is more personalized.
- The product has a variety of colors, such as red, green, yellow, blue, white, etc. We can also produce two-color or three-color push button switch if you need.
- The maximum current of the product can be reach to 5A 250V. The mechanical life of the push button is 100,000 times.
- The head of the illuminated push button switch is built-in waterproof ring, which can achieve IP67 waterproof effect.
- The product is designed to be welding pin, and the tail can be processed by various wire art and different terminals. It also has a special base to plug in, which is very convenient to use.
How does the 22mm illuminated push button switch work?
The 22mm illuminated push button switch has two types of product with lock and reset, and the operate mode is different.
- The operate mode of the product with lock is that install the push button switch on the mechanical equipment, then connect the wire and the power is on, press the button, the machine starts. Press the button again, the machine power is shut down.
- The operate mode of the reset product is that install the switch on the mechanical equipment, then connect the wire and the power is on, press the button, the machine starts. When release the push button, the push button switch is automatically reset and the machine power is off and stops working.
How to connect the wire with the 22MM waterproof illuminated push button switch？
There are four common wiring methods.
- This is currently the most common method, connecting a lamp pin and switch’s NO pin bridge to the required working equipment. Common pin is connected to the positive pole of the power, and the negative pole is connected to the device’s load, the other LED lamp’s pin is connected to the negative pole of the power. When the switch is pressed, the LED light in the metal button switch turns on and the equipment starts to work. Release it, the device stops working and the light is off. This is the most common connection. If you need the light in the product to be always on, please refer to the second connection.
2. In this connection, the built-in LED lamp is continued to power, whether the switch is pressed on, or not, the device starts working when the switch is pressed.
3. The fourth connection method is that the LED lamp is always connected with the power, but the switch is connected to the normally closed pin. The equipment is always working when the metal push button switch is not pressed. When the push button switch is pressed, the circuit contact is disconnected and the equipment stops working.
4. The third connection is the opposite to the first connection, connect the lights and NC pin with a heel jumper bridge. When the metal push button switch is not pressed, the light is always on and the device is working. When the switch is pressed, the circuit of the device begins to break off and stop working, the lamp is also switched off from the power and goes off.
Where is the illuminated push button switch used?
The product is widely used, commonly used for the car start switch, motorcycle modified start switch, home appliances, kitchen appliances, computer hosts, speaker control switches, stage equipment control switches, access control equipment switches, industrial control lights in various fields.
The product of Filn had passed the certifications of UL, CE, ROSH, ISO90001, and has the professional push button switch test laboratory, which can ensure the quality of the product.
Filn has 11 years of experience in push button production, also has a professional R&D technology team, who can customize various styles of push button switches according to your requirement.
How to purchase the illuminated push button switch?
If you need to customize the illuminated push button switch or request a button connection, you can email to our push button technical engineer, who will give you a satisfactory solution, and his email address is [email protected].
Your purchase volume is large, you can email directly to our international trade sales staff, who have 10 years of overseas sales experience, and will give you good prices and excellent service, their email address is [email protected].
Filn will provide the samples free of charge for your test.
If you have any questions about the marine push button switch, please contact us immediately. We will give you a satisfactory reply within 24 hours. Our email address is [email protected].