8MM Red Flashing LED Indicator Light

Flashing LED Indicator Light Parameters

Component Name Material
Lens PC Plastic
Metal Body H59 Brass Or 304 Stainless Steel
Washer T10 Cold Rolled Steel
Rubber Ring SIL Silica Gel
Nut H59 Nickel Plated Brass
Housing PA66 Nylon
Light Source LED
Resistor Metal Film
Cable PTFE AWG22 0.3mm²
Items Parameter
Rated Voltage 3V-780V DC or AC
Rated Current 20MA
Rated Power 0.2W
Insulation And Voltage Resistance 1800V
Working Life 100,000H
Electrical Life 100,000
Cold-resistant -40℃
Heat-resisting 80℃
Plug-in C2680 ROHS Brass

The description of the flashing LED indicator light?

  • The mounting dimension of the flashing LED indicator light is 8 mm, and its mounting way is thread style.
  • Flashing time of LED indicator light is 2 seconds, 5 seconds, 10 seconds, 15 seconds and so on. It can be produced in a variety of colors, such as red, green, yellow, blue, white, orange etc.
  • The flashing LED indicator light has a variety of voltages, such as 3V, 5V, 6V, 12V.
  • The waterproof rating of the flashing LED indicator light is IP67, and the warranty is 5 years.
  • The head material of the flashing LED indicator light is metal. It has the function of durable and explosion-proof.
  • The per weight of the 8MM flashing LED indicator light is 0.015KG, the total weight of 100 pieces is 1.5KG.
Flashing lights

Why is there a flashing LED indicator light?

Flashing LED indicators

In daily life, indicators play a role in information interaction, generally through a variety of light colors to express different signals.

Flashing lights are flashing in the same color to convey information, complete information interaction.

Like some stage lights, strobe lights, sound equipment and so on. The blinking time of the device can be set.

At the same interval, the LED keeps blinking, which can also be called breath light, which is a common way of information interaction.

Why are the normal lights suddenly flashing?

The cause of sudden flashing can be classified into four categories.

1. Voltage instability

Normally, the light don’t flash when it is turned off. If it flickers, it could be due to an unstable voltage situation. In the use of lights, if the indoor capacity is relatively low, such as more electrical appliances, then it will cause voltage instability, may be turned off when the CFL flashing.



2. Power source

If the socket is loose, so you need to take it off, and then plug it back in, so that will avoid flashing. In many cases, it’s all flickering due to losing. After reprocessing again, it can be used directly, there will be no flashing situation.



3. The switch is used to control the lamp with an indicator light

Because this “capacitive character” indicator light is constantly charged and discharged, bring about fluorescent lamp flashing, when it comes to this kind of situation, please remove the switch and indicator light, it will be ok.

4. The switch is set on the zero lines, caused by electrification of the lamp body

The switch is set on zero lines, the lamp body, switch and zero lines become”capacitor”. This kind of “capacitor” charge-discharge phenomenon, keeps the fluorescent lamp flashing at night.

In this case, change the zero and fire lines, just use the switch to control the live wire.

LED indicator light

What a flashing red light may indicate?

For different equipment, a flashing LED indicator light means different things.

1、Normally, the red light of the device is constantly flashing, which is likely to be the fault of the device. As the indicator light of information interaction, it is constantly flashing to convey the fault signal.

2、For some devices, flashing the LED indicator light means that the device is running normally, and flashing red light means that the device is working.

3、When the power of some charging device is low, the device will constantly flash red to remind us that it is time to charge the device.

Flashing LED indicator light is used on different equipment, which expresses different meanings. Therefore, before using it, you can read the instructions for the operation of the equipment carefully.

When you have questions , please call to consult and solve the problem in time.

Application of flashing lights

How to connect the wire with the flashing LED indicator light?

Check the positive and negative pole of the flashing LED indicator light with a multimeter, then connect the red line to the positive pole and the black line to the negative stage.

When connecting to the device, then turn the device on, see if the light is flashing or not, if it is flashing, it indicates that it is working.

The 8mm red flashing LED indicator light had passed the certifications of UL, VDE, CE, ISO90001, which ensure the product’s quality.

Filn also produces more than 1000 kinds of indicator light. If you have any questions or you want to customize the indicator light, please contact us at


Product Item FL1M-8CJ-3
Panel Mount Diameter 8MM
Contact Way With Pin
Install Way Screw Terminal
Lamp Type LED
Rated Voltage AC / DC, 3V, 6V, 12V, 24V, 220V, 380V
Lamp Color Red, Yellow, Blue, Green, White
Product Design Concave Head
Shell Material Brass Plated Nickel / Stainless Steel
Base Material PA66 Nylon
Terminal Material Brass
Applications Coffee machine, Kitchen equipment, Household appliances, Automobiles, Medical equipment, Industrial equipment etc.
Fill out my online form.