Cheap and Good Quality 8MM 120v Indicator Light

8MM Indicator light drawings

120v Indicator Light Product Introduction

The 120V panel mount indicator light is an 8 mm metal indicator light. This 120v LED indicator light is special and is assembled with side-by-side cables.

As can be seen from the picture, this 120V panel mount indicator light uses 2 heat shrink The tube is wrapped, and the other parts are side by side. Generally red and black AWG20 wire. The default line length is 20 cm.

Compared with other indicators, this 120V panel mount indicator light is much cheaper and more popular. The default accessory has a metal 8mmx0.75 nut, a metal gasket and a rubber waterproof ring.

120v indicator light can do more than 120V, the general customers buy voltages, 3V, 12V, 24V, 36V, more than 36V, such as 110V, 220V, 380V, we need an additional rectifier 4007 because they are divided positive The negative 5 mm lamp bead has good brightness.

The life span is also stable. Generally, it can reach more than 5w hours.

If the customer is retail, we can pack one bag per bag, or one more bag, according to the customer’s requirements, or 100 pieces per bag, and the spare parts are packed separately.

Anyway, our 120v indicator light can be packaged according to your needs.

The 120V panel mount indicator light can be made in red, green, yellow, blue, white, and red is bought more often, and it is used more on the panel. The nut is 0.75x8mm.

Usually, 120v green indicator light is more commonly used.
The material of this 120v indicator light is copper alloy, the head is PC, and the tail is PA66 nylon. Withstand voltage up to 1800V.

Where are the various colors of 120v LED indicator light used in the control circuit?

In a circuit, if there is only one light, then the light on means it is working, and the light off stops working, no matter what color it is.

If there are two lights in the circuit, one is red and the other is green, then red means stop working, green light means working, and red also has the function of a power indicator. If there are three indicator lights in the circuit, such as decompression starting or star-delta starting cabinet, in addition to the above two lights indicating the same function, there may also be a yellow light.

This yellow light represents the process of starting. After the yellow light is off, it turns green. It enters the normal operating state.

How to wire a 120v indicator light?

Install the button of the 120V LED indicator light on the indicator panel.

Since the LED of the 120V indicator lights is non-polar, you don’t need to divide the positive and negative levels for trial use.

Connect the 12V voltage, turn on the power, and the 120V green indicator light can light up. Yes, very simple.

More high-quality LED indicator lights

If you need anything, please contact us at inquiry@cnylin.com.cn