16MM 2Pins IP67 Momentary Stainless Steel Push Button Switch

Stainless steel push button switch parameters

Production Series FLM16-10FSM Light Guide Button
Button Shape round Actuator 304 Stainless steel
Button LED Color Housing Sleeve H59 nickel plated brass/304Stainless steel
Mechanical Life The 500 thousand time Button Pin H62 copper alloy
Electrical Life The 100 thousand time Rubber Ring SIL silica gel
Protection Level IP65 IK08 Nut H59 nickel plated brass
Rated Voltage 36V(DC) 250(AC) Housing PA66+GF20% nylon
Rated Current 2A(DC)0.5A(AC) Light Source
Rated Power 72W(DC)125W(AC) Resistor
Operating Temperature -25℃~+85℃ Contact AgCdO12

In some application scenarios, the space for installing the push button is very narrow, how to use our push-buttons in limited space? The overall length of the shell for the regular 1NO1NC is too long, we recommend our 1 NO self-reset stainless steel push button switch.

Please refer to below description of the stainless steel push button switch.

  • The mounting hole size of the product in the picture is 16mm, except the size, we also has the mounting hole size of 19mm, 22mm.
  • The head shape is divided into flat-head, high-head and ball head, customer can choose it according to their own requirements.
  • The waterproof rating of the product is IP67.
  • Except the product of 2 pins 1NO without light, it also has 1 NO with light of 4 pins.
momentary stainless steel push button switch
  • The metal material of the product is divided into copper plated nickel, stainless steel, and zinc alloy. Stainless steel’s shell has high corrosion resistance, and its chemicals are relatively stable and suitable for harsh environments without rapid rust.                                                        Brass nickel-plated shell is lighter, shiny yellow and has low corrosion resistance compared to stainless steel. Black zinc aluminum alloy is suitable on black products. The voltage of the product is 3A/250 V AC, it can be used on the electric appliances, which power is below 500W.
  • The mechanical life of the product is 50,000 times, and the shelf life is 5 years, Filn will replace the problem products free of charge during the quality guarantee period.
  • The wiring way of the product is screw-pin wiring way, just peel the head of the wire and put it inside the screw hole and tighten it. It is very convenient to use.

How to wire the stainless steel push button switch?

Press and hold the push-button, the device starts. Release the push-button, the device is closed.

The wiring way is as follows, the first step is that connects the positive pole of the power to the NO pin of the switch, the second step is that connect the negative pole of the power to the C pin of the switch.

How to wire the push button switch

Where do you use this 2 pins stainless steel push button switch?

Since the product’s shell length is shorter, it can be used in a relatively narrow space, therefore, it is widely used in the doorbell system and the early warning system.

push button switch application

Where to buy the 16mm Stainless steel push button switch?

You can place order directly at, or you can purchase the product through offline email communication.

Per weight of the product is about 0.015kg, we’ll choose the delivery way according to customer’s quantity.

One box is packed in 50 pieces, and one carton is packed in 1000 pieces. There is no MOQ, we can provide the samples free of charge for your testing.


If you need our products, or you’re interested in our products, or you need the samples, please contact us, our email address is [email protected].

Fill out my online form.