19MM New Short Size IP67 Touch Normally on Push Button Switch

19mm Normally on Push Button Switch Product Introdution


This 19 mm normally on push button switch is newly developed for demand from Germany. We met this guest in Munich. Later, we met at the Munich Electronics Show in Germany in 2018. This guest came to our booth and was very interested after seeing our full series of normally on push button switches and indicator lights. We communicated a lot and learned The customer is in the auto parts category. At present, he is also cooperating with many Chinese factories to operate various button switches. His main customers are mainly auto parts dealers, car modification, and online B2C Flathead customers. Now, guests, There is a new project that requires an ultra-short 19 mm normally on push button switch, and it needs a micro stroke.

Through our understanding of customers, we understand three points of customer needs:

1. The new product requires that the opening is 19 mm, and the total length cannot exceed 13 mm.

2. The shell should be made of stainless steel, which should be beautiful and beautiful, and the tail should be connected by welding wires.

3. The requirement is the product of micro current, the electrical performance is better.

4. The stroke should be short, it is best to use a light touch type.

5. The head should adopt a waterproof structure.

6. On these foundations, because this is an urgent new development requirement, all development cycles and delivery dates should be fast
For this reason, FILN decided to develop a cost-effective normally on push button switch for him for free, because we developed it at our own expense, and we can also sell this normally on push button switch on the market.

Through the efforts of FILN R&D engineers, this ultra-short length was developed after 15 days, the total length is controlled at 12.1 mm, the shell is stainless steel, and the tail is not welded normally on push button switch.

This newly designed normally on push button switch fully meets the expectations of the guests, which enabled the guests to make rapid progress on this new project, and solved their problems. The guests also flew to our company from Germany many times to visit and inspect the factory. Trust us and start to officially purchase this newly designed push button switch. In the follow-up, we, and we have also cooperated to develop several new products. And we are constantly improving the certifications and certificates of newly developed products.

So what does the new normally on push button switch button look like? Everyone has been looking forward to it for a long time. The following is a detailed description of this custom button switch.

1. This customized non-lamp normally on push button switch uses stainless steel shell material, so the stainless steel parts are turned out by high-precision lathes, and the surface is polished, which shines in light or sunlight

2. This normally on push button switch adopts an ultra-short design. The total length of the shell is 12.1 mm. Using advanced production technology, the whole product looks very delicate and elegant.

3. The button wiring of this normally on push button switch is also very convenient. Due to the design of no light, there are only two switch pins at the tail, which can be used directly when connected to the circuit.

4 Customers will ask this question, how to install a push button switch?

This lockless normally on push button switch, the opening is 19 mm, the button is screwed to fix the button, first install the button on the panel, then put on the waterproof ring, then screw on the metal nut, not only very strong but also waterproof. Of course, the button itself is IP65 waterproof.

The customer asked another question. Our current model is without light. Can we make it with light if there are future projects?

According to the needs, FILN immediately started to develop a normally on push button switch with lights on the basis of the original design. We have two new designs with lights, one with two lamp feet opposite the tail. The other one is with a wire harness directly at the tail. With the JST PH 2. In Wire harness, customers only need to plug in the wiring terminals during use, which is simple, convenient and fast.

At the same time, the customer asked a question. Some of our complete machines will be exported to the United States. Do you have American UL certification?

Regarding the issue of UL certification in the United States, after a year of hard work by our team, now the full range of push button switch has obtained UL certification in the United States, although the cost of UL certification in China is very high. But we will still invest a lot of manpower, material, and financial resources to complete it. And we are working in the evening certification of newly developed products.


The following is a question and answer for this normally on push button switch


1. What is the shelf life of this normally on push button switch?

The shelf life of this button is 5 years. If you want better quality, FILN can customize it for you, and the service life can be 800,000 times. If you encounter any problems during the warranty period, you can write an email to contact FILN technical after-sales group [email protected], we will contact you immediately within 12 hours to solve any of your product quality problems and solutions.


2. What is the waterproof rating of this normally on push button switch?

We use a waterproof ring design inside this button, with a waterproof rating of IP65.


3. What is the current of normally on push button switch?

The current of this button is relatively small and belongs to the microcurrent. It is used below 0.5A ampere. If it is higher than 0.5A, its service life will be very short, and it may burn out after about 1000 times.


4.How to buy this normally on push button switch?

If you use less, you can go directly to FILN’s AliExpress website to buy,, you can choose 15-20 days delivery express delivery, so the freight is cheaper.

If you are a factory and use this button switch extensively, you can write an email to contact the sales staff of FILN company [email protected], the FILN button switch sales team has 10 years of sales experience and service in foreign trade, We will get back to you within 24 hours.


5. Can FILN company customizes the buttons we need that are not available in the market?

FILN company has more than 10 professional button R&D engineers who specialize in customizing various types of button switches with different functions. As long as you need it, FILN company can provide various customized services. Moreover, it only takes 30 days for a new button from your idea to R&D and design, the development of abrasive tools to the completion of finished samples. FILN company can also provide OEM services, can be marked with your trademark and so on. As long as you pay for the cost of abrasive tools and research and development for the button switch, FILN will only provide you with exclusive use and sales, which can greatly enhance your competitiveness and profit.


6. Is there any other size for this button beside the 19 mm hole?

This lockless normally on push button switch is normally open, the shell is very short, and it can also produce 19MM, 22MM holes. At the same time, the new sizes are designed with and without lights, and the voltage with lights is 12-24V. The lamp colors are red, green, yellow, blue and white.


7. How about the price of this normally on push button switch?

This question is a very interesting question, you can only contact us for this question, but we promise to give you unexpected surprises, please contact us immediately at [email protected].

Hot product: panel indicator light

Production Series FLM19-10FJM Light Guide Button
Button Shape round Actuator 304 Stainless steel
Button LED Color Housing Sleeve H59 nickel plated brass/304Stainless steel
Mechanical Life The 500 thousand time Button Pin H62 copper alloy
Electrical Life The 100 thousand time Rubber Ring SIL silica gel
Protection Level IP67 IK09 Nut H59 nickel plated brass
Rated Voltage 12V(DC) Housing PA66+GF20% nylon
Rated Current 0.1A(DC) Light Source
Rated Power 1.2W(DC) Resistor Metal film
Operating Temperature -25℃~+85℃ Contact AgCdO12
Fill out my online form.