12 Volt Panel Indicator Lights Design Concept
A product to be introduced today is a 14mm size 12 volt panel indicator lights. This size is 14mm installation size, flat head lampshade, brass shell, PA66 base, imported lamp beads, no positive and negative poles. , It is very convenient to use, and its luminous color is uniform and translucent. The wire used is PVC positive marking wire, AWG22, and the conventional wire length is 20cm. If you want to use silicone wire, Teflon wire or other wire, or customize the length of the wire, you can do it 1 meter or longer.
Regarding the packaging method, our regular packaging is a 12 volt panel indicator lights, a ziplock bag, with a nut, a waterproof ring, and a plum gasket. Then a box of 50 12 volt panel indicator lights. We have a US reseller customer who mainly sells our products on Ebay and Amazon. Our packaging method does not reach the perfect standard in his mind, so he proposed his idea to us. He also put a 12 volt panel The indicator lights are packed in a bag, but this bag is a 20-wire ziplock bag, which is thicker than ordinary ziplock bags, and the quality is relatively better. Nuts and waterproof rings are not put in the ziplock bag, but they are installed directly in the 12 On the volt panel indicator lights, the plum gasket is not needed. Plum gaskets are used by customers according to their needs. Our aim is to meet the needs of our customers as much as possible. Therefore, we have always used the packaging method specified by the customer for the customer’s products in the later period. The customer is very satisfied with our service, of course, the premise is also very satisfied with the quality of our products.
Q&A for 12 Volt Panel Indicator Lights
Q: The FILN trademark is printed on the 12 volt panel indicator lights. Can the customer’s trademark be customized?
A: No problem, no matter what the trademark is.
Q: Regarding the packaging of 12 volt panel indicator lights, I want a bundle of 100, can I tie it up with a cable tie?
Q: What is the resistance used for 12 volt panel indicator lights?
A: The conventional resistance of 12 volt panel indicator lights is 1.8k ohms. If you want to use 2K or other resistances, you can communicate with us.
Q: What is the rated current of 12 volt panel indicator lights?
A: The rated current is 20mA.
Q: Are samples of 12 volt panel indicator lights sent for free?
A: A small amount of samples can be free, but the freight needs to be borne by the customer.
Q: Is there a minimum order quantity for 12 volt panel indicator lights?
A: There is no minimum order quantity requirement. We are a direct factory and can make samples at any time.
For more questions about this indicator, please contact the following email: [email protected] We will answer you as soon as possible.
Popular product : flat head terminal