Search

12V Momentary Waterproof Miniature Push Button Switch

2V Momentary Miniature Push Button Switch Product Introduction

 

The head shape of this miniature push button switch is flat. The head panel is flat. So even if the installation aperture is only 12 mm, no matter how big your finger is, it is very easy to operate. It can be used to modify the computer host, the horn button of the automobile and motorcycle industries, and can also be used in household kitchen equipment such as range hoods, and can also be used in other electrical industrial control equipment, automobile industry, electric vehicle industry, household appliances, industrial equipment, instruments and meters, Communication equipment, fitness and beauty equipment, medical, aviation, national defense and transportation fields.

The picture of this miniature push button switch is without light, it can be self-locking or self-restoring, and the head shape can also be high-end style. Generally, the one without a lamp has 2 feet, and the one with light has 4 feet. It can only do 1NO, and the connection method is particularly simple. Standard products are equipped with fixing nuts and waterproof washers. Exquisite and beautiful.

I believe people will install a miniature push button switch. If it is installed incorrectly, it will short-circuit. How to install a miniature push button switch correctly?

1. First unscrew the screw, and then put the waterproof ring into the undercut groove of the switch.

2. Put the switch with the waterproof ring into the switch hole of the panel.

3. Screw on the nut.

4. Finally, carry out circuit integration and wiring use.

5. Please carefully read the manual of Yulin Electronics using a miniature push button switch when wiring.

Waterproof metal push button switches are excellent in flame retardant, insulation, impact resistance, and moisture resistance. The material has strong stability and is not easy to change color. In addition to using high-grade plastics, the current switch panels are also made of gold-plated, oxidized black, stainless steel, copper, and other metal materials, providing people with more and more choices.

How is the IP waterproof rating of the miniature push button switch tested?

(1) IPX 1

Method name: vertical drip test

Test equipment: dripping test device

Sample placement: Place the miniature push button switch sample on the rotating sample table at 1r/min in the normal working position, and the distance from the top of the sample to the drip opening is not more than 200 mm.

Test conditions: dripping water is 10.05 mm/min.

Duration: 10 min

(2) IPX 2

Method name: 15°drip test

Test equipment: dripping test device

Sample placement: make one surface of the sample form a 15° angle with the vertical, and the distance from the top of the sample to the drip opening is not more than 200 mm. After testing one side each time, change the other side four times.

Test conditions: the dripping volume is 30.5 mm/min.

Duration: 4×2.5 min (10 min in total)

(3) IPX 3

Method name: Water spray test

experiment method:

a. Swing tube spray test

Test equipment: swing-tube water spray test device

Sample placement: Choose a swing tube with an appropriate radius, make the height of the miniature push button switch sample table at the position of the diameter of the swing tube, and place the miniature push button switch sample on the sample table so that the distance between the top of the sample and the sample nozzle is not greater 200 mm, the sample table does not rotate.

Test conditions: The water flow rate is calculated according to the number of spray holes of the pendulum tube, each hole is 0.07 L/min. When water is sprayed, the water spray from the spray holes in the 60° arc on both sides of the pendulum tube is sprayed to the sample. The sample of the tested miniature push button switch is placed in the center of the semicircle of the pendulum tube. The pendulum tube swings 60° on both sides of the vertical, a total of 120°. Each swing (2×120°) about 4s.

Test time: continuous spraying water for 10 min.

b. Nozzle water spray test

Test equipment: hand-held water spray test device

Sample placement: make the parallel distance between the top of the test and the nozzle of the hand-held nozzle be between 300 mm and 500 mm

Test conditions: A baffle with a counterweight should be installed during the test, and the water flow rate is 10 L/min

Test time: Calculated according to the surface area of ​​the tested miniature push button switch sample, 1 min per square meter (not including the installation area), at least 5 min.

(4) IPX 4

Method name: water splash test

experiment method:

a. Swing tube splash test

Test equipment and sample placement: the same as the above IPX 3 item a;

Test conditions: Except for the following conditions, it is the same as the above IPX 3 type a; the spray area is the water spray from the spray holes in the 90° arcs on both sides of the pendulum pipe to the miniature push button switch sample. The test sample is placed in the center of the semicircle of the pendulum tube. The pendulum tube swings 180° on both sides of the vertical, a total of about 360°. Each swing (2×360°) about 12s

Test time: Same as the above IPX 3 paragraph an (ie 10 min).

b. Sprinkler type splash water test equipment and sample placement: same as the above IPX 3 item b;

Test conditions: Remove the baffle with counterweight installed on the equipment, and the rest is the same as the above IPX 3 item b;

Test time: Same as the above IPX 3 type b, that is, calculated according to the surface area of ​​the tested miniature push button switch sample shell, 1 min per square meter (not including the installation area), at least 5 min.

(5) IPX 5

Method name: Water spray test

Test equipment: The inner diameter of the nozzle is 6.3 mm

Test conditions: make the distance between the test miniature push button switch sample and the spray nozzle 2.5 m ~ 3 m, and the water flow rate is 12.5 L/min (750 L/h)

Test time: calculated according to the surface area of ​​the tested miniature push button switch sample, 1 min per square meter (not including the installation area) at least 3 min.

(6) IPX 6

Method name: strong water spray test;

Test equipment: the inner diameter of the nozzle is 12.5 mm.

Test conditions: Same as above 100 L/min (6000 L/h)

Test time: Calculated according to the surface area of ​​the tested miniature push button switch sample, 1 min per square meter (not including installation area) at least 3 min.

(7) IPX 7

Method name: Short-term immersion test

Test equipment and test conditions: immersion tank. The size should be such that after the sample is placed in the immersion tank, the distance from the bottom of the sample to the water surface is at least 1 m. The distance from the top of the sample to the water surface is at least 0.15 m.

Test time: 30 min

(8) IPX 8

Method name: Continuous driving test;

Test equipment, test conditions, and test time: To be determined by both the supplier and the demander (the buyer and the seller), the severity should be higher than that of IPX 7.

Note: In addition, many outdoor electronic products also emphasize floating ability.

Our miniature push button switch has passed IP67 certification, CE, ROHS, UL and other certifications, which can meet the needs of different customer groups.

The miniature push button switch is of superior quality. The button has a high-strength and anti-destructive performance. It is not only beautiful, elegant, noble, and elegant. The product also has the advantages of multiple types, multiple specifications, and multiple uses. It meets the different needs of customers in various industries and is widely used It is used in the key surface control system of various industrial cabinets, household appliances, and other industries. The purpose of the switch is not only the switch off the light bulb in the home but also the switch of other things, especially the switch off the computer and mobile phone. If these things are only practical and unsightly, they will definitely not be welcomed by everyone. Commonly used parts in the home, these devices will also have a miniature push button switch, but its product will be much smaller. With the gradual changes in people’s pursuits, now the old things are no longer practical, and more and more things are changing, because what we need to do is to ensure that the needs of consumers can be met, so now miniature push button switch not only To ensure practicality also needs to ensure aesthetics.

If you have any needs for a miniature push button switch, please email us at [email protected]. If you have any questions or ideas about miniature push button switch, you can also contact our engineer Louis Lin, whose email is [email protected].

Hot product : LED indicator light

Production Series FLM12-10FJM Light Guide Button
Button Shape round Actuator 304 Stainless steel
Button LED Color Housing Sleeve H59 nickel plated brass
Mechanical Life The 500 thousand time Button Pin H62 Copper alloy
Electrical Life The 100 thousand time Rubber Ring SIL silica gel
Protection Level IP65 IK08 Nut H59 nickel plated brass
Rated Voltage 36V(DC) 250(AC) Housing PA66+GF20% nylon
Rated Current 1A(DC)0.5A(AC) Light Source LED
Rated Power 36W(DC)125W(AC) Resistor
Operating Temperature -25℃~+85℃ Contact AgCdO12
Fill out my online form.