12V Red Mini LED Indicator Lamp Light

Chapter 2: LED Indicator Lamp Detailed Parameters

Component name Material
lens PC plastic
Metal Body H59 brass or 304 stainless steel
Washer T10 Cold Rolled Steel
Rubber Ring Silica gel
Nut H59 nickel-plated brass
Housing PA66 nylon
Light Source LED
Resistor Metal film
Cable PTFE AWG24 0.2mm²
Items Parameter
Rated Voltage 3V-780V DC or AC
Rated Current 18MA
Rated Power 0.2W
Insulation And Voltage Resistance 1800V
Working Life 100,000H
Electrical Life 100,000
Cold-resistant – 40℃
Heat-resisting 80℃
Plug-in C2680 Rohs brass

Chapter 3: What is the LED indicator light?

LED indicator is using light-emitting diodes as a lamp. For example, the power indicator on the chassis is an LED indicator. The difference between LED indicators and neon bubble indicators is that LED indicator lamps can produce DC and AC voltage. Neon bubble indicator lamp can only be suitable for AC

Chapter 4: What is the parameter of the Red Mini LED indicator light?

The diameter of the mini LED indicator lamp is 6mm, which diameter is very small.

You just need to design the bore diameter between 6.1mm to 6.3mm on the indicator panel and then put the LED indicator light in the bore, screw it with the indicator nut and it will be very firm.

light installation
  • The metal material is brass, which has explosion-proof function. After the electroplating process, the appearance of the brass will be very white and bright. If you want the colorful appearance of the metal shell, you can choose zinc alloy. Another material is stainless steel, which advantage is corrosion resistance. Usually, it is used on ships or the circumstance where has chemical reactions.
  • The LED indicator lamp is twin-core, which has non-polarity function. You don’t need to distinguish the positive and negative pole at the circumstance of DC voltage. The LED service life can last to 50,000 hours.
  • The waterproof rating of the LED indicator lamp is IP67, and you can use it outdoor.
  • The LED indicator lamp has a variety of colors, such as red, yellow, green, blue, white, and orange, etc. We can also produce two-color and three-color LED indicator lamps.
  • LED indicator lamp has a variety of voltages, such as 2V, 3V, 5V, 6V, 12V, 24V, 120V, 220V, 380V, etc.
  • The wire of the LED indicator lamp is Teflon wire, of which high temperature resistance is 220 degrees. The end of the wire can be connected with a variety of terminals according to your needs.



Indicator light application

Chapter 5: How to produce the LED indicator lamp?

1. First of all, you should prepare the below materials, such as copper parts, indicator plastic parts, Teflon wire, LED, resistors, and other materials.


2. Due to the small volume of the mini LED indicator lamp, we can only use the welding process to weld the LED and resistance, then connect the wire. Then put the welded LED lamp through the lamp holder, with the waterproof insulation glue and screw on the copper.


3. Connect the LED indicator lamp to the power test bench for power test, then put it on the withstand voltage test instrument for voltage test.


4. Pack each LED indicator lamp individually.

Indicator production

Chapter 6: How to connect the wire with the LED indicator light?

1. First step is to check the equipment is not powered on, then start to the next step.

2. Find the wire to be connected to the equipment, distinguish the live line and zero lines. The red line is live line and the blue one is zero line. You can also test with an electric pen. One light end of the electric pen is the live line, and the other end is the zero line. Remember, never touch it with your hands directly.

3. The next step is to pinch the thread. After finding the wire, use small pliers or small scissors to pinch off the skin of the corresponding wire end on the equipment to expose the longer copper wire. Remember to not leave the copper wire too short, or the connection is difficult to connect.

4. Fix the LED indicator light in the correct position of the machine. Then connect the positive and negative wires of the indicator to the two wires corresponding to the power color.

5. The last step is to use the tape to fix the LED indicator light lamp and connection port of the machine. Remember to buy electrical insulation tape. Wrap the wire to tape and fix it. The tape is tighter and tighter.

6. Restore the wire to the original place in order to keep the product beautiful. Energize and open the equipment to see if the LED indicator light is light up or not, if the light doesn’t light up, it means there is something wrong with the wiring.






red led indicator light wiring

Chapter 7: Purchase Method

What is the MOQ of the LED indicator light?


Filn produces more than 1000 kinds of LED indicator light with no MOQ requirement, you can purchase one piece, however, the cost of the international express is relatively high. Besides, Filn will provide the LED indicator light free of charge for your test.

How about the price of the LED indicator lamp?


The price of the LED indicator light produced by Filn has a great advantage over the European American indicator light factories. Usually, the price of APEM and E-switch is about 4 times as much as Filn.

If your purchase quantity is large, Filn will provide you more profits, for example, you cost 100,000 dollars to purchase European American indicator light while only cost 30,000 dollars to buy Filn’s.

Where can I buy the LED indicator lamp?

If your demand volume is very large, you can directly E-mail us, we have a professional sales engineer to contact you and offer you the best price and service.


If you need LED indicator light customization, our indicator light engineer will give you a perfect solution within 24 hours.


If you only have a small volume demand, you can place an order in AliExpress or Amazon. Our email is

Filn delivery fast
Product Item FL1M-6CW-1
Panel Mount Diameter 6mm
Contact Way Wire Leading type
Install Way Screw thread
Lamp Type LED
Rated voltage AC/DC, 3V, 6V, 12V, 110V, 220V, 380V
Lamp Color Red, Yellow, Blue, Green, White
Product Design Concave head
Shell Material Brass plated nickel/Stainless steel
Base Material PA66 nylon
Terminal Material PTFE 0.2MM
Applications Coffee machine, kitchen equipment, household appliances, automobiles, medical equipment, industrial equipment, etc.
Fill out my online form.