There are many complicated Nissan security indicator light in the car dashboard, usually signal warning lights.
When the Nissan security indicator light is the following pattern, the Nissan security indicator light is a brake system failure light.
At this time, you may have some doubts about the system fault light, I will use the question and answer situation to help you answer your doubts.
What is the function of the brake system fault light?
The brake system fault light is generally red. It monitors the operating conditions of the automobile brake system, such as whether the brake fluid is sufficient, whether the brake pads have reached the limit, whether the parking brake is released, and so on.
What should I do when the brake system fault light is on?
The brake system is very important to the car, and it is also the key to protect the drivers and passengers.
Therefore, manufacturers have added relevant electronic components to the brake system.
Once the brake system fails, the brake system fault light will be on, and the brake system fault light will be on.
Where did it go wrong? Let’s take a look together. The first possibility is that the brake pads are seriously worn.
There are two types of brake pads with an induction line and without an induction line. With the induction line, when the brake pad is worn to the limit position, the induction line will automatically turn on the circuit, Then the fault light will light up. The brake pads without induction wires will not automatically alarm, but the sizzling sound of “iron rubbing iron” tells you that the brake pads need to be replaced.
The second possibility is that the brake fluid level is too low. The brake fluid plays a vital role in the car’s braking system.
When the driver steps on the brake pedal, the force from the pedal is determined by the brake.
The piston of the master cylinder transfers energy to the brake cylinders located on the wheels through the brake fluid so that the brake pads are in contact with the wheels to prevent the vehicle from moving forward.
The lack of brake fluid will also be accompanied by a significant lack of braking force and even a situation where braking force is lost. In this case, just replenish the brake fluid in time.
In addition to the above-mentioned common faults, there are other factors that cause the brake system fault light to turn on, such as brake system oil leakage, false alarms, etc.
Once the brake system failure light turns on during driving, the owner must not panic, slow down as much as possible, pull over as soon as possible, and then investigate the cause of the failure.
Our company has a long history of researching and producing indicator lights.
Our Nissan security indicator light is usually used in Coffee machine, kitchen equipment, household appliances, automobiles, medical equipment, industrial equipment, etc.
It is also widely used in automobile dashboards, and all kinds of automobile dashboard warning lights can be used. Under normal circumstances, our company’s Nissan safety indicator can produce 8 mm, 10 mm, 12 mm, 14 mm, 16 mm size indicators with symbols in accordance with customer requirements.
At the same time, there are two types of Nissan security indicator light with symbols, silver and black, as shown in the figure.
Under normal circumstances, our Nissan security indicator light is monochromatic, and the colors can be red, yellow, blue, white, and green.
If you want to make other colors, we can also customize the lights in other colors. But if customers have special requirements, we can also make two-color or three-color Nissan safety indicators.
The colors of the two-color lights are red, green, red and blue, blue-green, red yellow, yellow and blue, and the colors of the three-color lights are red, green, blue, red, yellow and blue.
At the same time, our Nissan security indicator light supports voltages from 3v to 380v. The most frequently used voltage is 12v, and there are more of 24v and 220v. If you are interested in the Nissan security indicator light, you can consult us at any time.