Introducing a button of the company, 19mm exit push button switch.
The specific details of this button will be explained as follows:
1. The size of the button mounting hole is 19mm. The optional luminous colors for exit push button switch are red, green, yellow, blue, and white. These five colors are the most basic colors. At present, these colors are the mainstream colors on the market and are the most widely used. The light source of FILN exit push button switch is very pure, the brightness is strong enough, and the color is very beautiful. If you need buttons to emit special light, such as purple or orange, these need to be customized. This lamp has screw feet. In addition, other 19mm button styles are available in pin and wire styles. The basic pin version is a 5 pin 1no1nc function. In addition to single-color buttons, we can also make two-color and three-color buttons, and produce different buttons according to customer needs.
2. The optional voltage of 19MM exit push button switch is 3V/6V/9V/12V/24V/36V/48V/110V/220V/250V/380V, FILN’s working voltage range is 3v~380v, and the common voltage is 12v. Universal AC and DC power supply. This button is 110v voltage, screw feet.
3. Housing material: real all stainless steel, not brass plating. Although the copper plating looks the same on the outside, in fact it is not. Over time, the surface plating layer will be worn out and the copper will appear, which is quite ugly. Stainless steel is different. No matter how long it is used, it will always be bright as new. But we are optional. If customers require brass nickel-plated materials, we will also make corresponding buttons. In addition to stainless steel and brass nickel plating, we can also make black-plated buttons. This button has a black appearance and uses better technology to achieve the best appearance and performance of the button.
4. The 19MM exit push button switch lighting method is ring lighting. In addition to ring lights, Yulin also has lighting and full lighting. FILN Button supports a variety of symbol customization. In addition to basic symbols, it also supports special customization, such as company name, logo, brand name, specially designed patterns, etc., which can all be realized by our button engineers.
5. Our company has the ownership and right to use the filn trademark. The company has its own factory building of 1,500 square meters and several employees. The button technicians have very deep professional knowledge, and they have many years of experience in product design and development, upgrading and improvement, and mold manufacturing. So far, we can complete the delivery of 4000 units per day to ensure the delivery time of customer orders. Most of our company’s buttons pass ul, vde, tuv, ce, etc. We have implemented the iso9001 management model and achieved relevant results. Since its opening, Yulin has adhered to the business philosophy of quality and customer benefits, and has provided customers with cost-effective products. All products including waterproof buttons have been certified by safety regulations. ROSH standard products can be customized. The company’s products are exported to Europe, America, Middle East, Asia and other regions. The company always adheres to the tenet of “customer first, quality first, reputation first”. Adhering to the quality policy of “people-oriented, strict management, meticulous for customers, continuous improvement and scale”, centering on the ISO9001 international quality system certification and product certification requirements, we continue to increase technical input to design and produce high-quality products. I believe that through hard work, we will develop into one of the most professional, complete specifications and best services in the country. We sincerely look forward to providing satisfactory services and quality products to new and old customers at home and abroad.
6.This 19MM exit push button switch has a self-resetting function and a self-locking function to choose from. The exit push button switch self-resetting function refers to the button reset and bounce back as soon as the hand is released. 19MM exit push button switch self-locking function means that after the button is pressed, the button is locked, and then the button can be bounced back by pressing it again. At the same time, you can select the normally open function or the normally closed function. The normally open function refers to the normally open state, which is turned on after pressing. The normally closed function is usually in the on state, and then it is off after being pressed. Customers can choose automatic recovery, self-locking or normally open and normally closed functions according to their own situation.
In general, the advantages of this 19MM exit push button switch are very obvious: the switch terminals are screw feet, which are sensitive to contact and easy to install. The design is reasonable, the appearance is beautiful, the volume is small, and the precious space of the panel is saved. The function is clear, safe and reliable, the internal structure adopts high-precision parts, and the service life can reach 50,000 times. The color of the 19MM exit push button switch can be customized, and multiple colors can be selected as required. The self-locking function is locked when pressed, and can be clearly distinguished when it is together with the reset switch. Avoid misoperation.
Complete safety certification.
Common failure analysis of metal push button switches:
1. When the button is pressed, the contact does not move:
1) Garbage, dust or water has entered;
2) A chemical film is formed on the contact surface due to the influence of the surrounding harmful gas;
3) Flux enters during welding;
4) The internal spring may be broken;
5) It may be that the operation speed is too slow, resulting in unstable contact switching;
6) The operating frequency may be too low, causing an oxide film on the surface of the contact.
2. When the button is released, the contact does not reset
1) The button has instantaneous action and alternate action. To choose alternate action, you need to press the button again;
Momentary action: button press, contact action, button release, contact reset;
Alternate action: when the button is pressed, the contact moves, the button is released, the contact remains in action, and then press the button to reset the contact;
2) Contact welding
Reason: The load exceeds the load capacity of the contact;
The arc causes the contacts to weld;
The surge current exceeds the maximum current that the switch can withstand;The switching frequency exceeds the allowable operating frequency range;
3)The contact of the button with light is activated, and the indicator light is off.Whether the polarity of the light is correctly connected;Whether the applied power supply voltage is suitable for the voltage specification of the lamp.
If you are interested in FILN’s metal buttons, then don’t hesitate to send an email to our staff:[email protected].
Hot Product : box panel indicator light